Nitrogen and phosphorus removal for swine wastewater by ammonium crystallization and intermittent aeration process

Abstract

A process on crystallized precipitation of ammonium by adding magnesium salt and phosphate was carried out to improve C/N ratio in swine wastewater. After completion of crystallized precipitation of ammonium, an intermittent aeration process with aeration and non‐aeration periods alternated at interval of 1:1 hr day^‐1 is used for the improved swine wastewater (T‐N/BOD=0.14: BOD=8200 mg/liter and T‐N=1166 mg/liter). The results obtained from the experiment show that the removal ratios of T‐N and NH₄‐N are 91% and 99%, respectively. T‐P is not removed, while the removal ratio of PO₄‐P is 60% as 3% of CaCl₂ liquid is added. The results also indicate that dilution with water is effective to improve the removal of phosphorus even if raw swine wastewater contains high concentrations of T‐N, T‐P, BOD, and TOC.     

Distribution and transportability of hexabromocyclododecane (HBCD) in the Asia-Pacific region using skipjack tuna as a bioindicator

The geographical distribution of hexabromocyclododecane (HBCD) was investigated through analysis of muscle tissue of skipjack tuna (Katsuwonus pelamis) collected from offshore waters of Asia-Pacific region (Japan, Taiwan, Philippines, Indonesia, Seychelles, Brazil, Japan Sea, East China Sea, South China Sea, Indian Ocean and North Pacific Ocean). HBCD was detected in almost all samples analyzed (<0.1 to 45 ng/g lipid weight basis), indicating widespread presence of this compound in the marine environment. Elevated concentrations of HBCD were found in skipjack tuna from areas around Japan, which have the larger modern industrial/urban societies, and implicated these areas as primary regional sources. All three individual HBCD isomers (alpha-, gamma- and beta-HBCD) were detected in almost all samples; the percentage contribution of the alpha-isomer to total HBCD increased with increasing latitude. The estimated empirical 1/2 distance for alpha-HBCD was 8500 km, which is one of the highest atmospheric transportability among various halogenated persistent organic pollutants (POPs).     

Optimization of the food waste water incineration with respect to CO and NO<Subscript>x</Subscript> emission characteristics

The incineration of food waste water in conjunction with the domestic waste is getting attention as a food waste water treatment method, due to its low treatment cost and high efficiency. Many studies verified that the ammonia in the food waste water served as a reducing agent to suppress the generation of NO_x when the food waste water was injected and incinerated. However, they have not revealed the correlation between the change in the concentration of the CO and NO_x by the influence of the solid matters contained in the food waste water on the incineration of the wastes. The purpose of this study is to determine the optimum amount of the food waste water injected through four nozzles in the primary and secondary incineration chambers and to assess the correlation between the concentration of CO and NO_x in accordance with the food waste water injection in each chamber of the incinerator. For the study, four food waste water injection nozzles were installed; two (A and B) at the top of the primary incineration chamber and the other two (C and D) in the secondary incineration chamber. The correlation between the change in the concentration of CO and NO_x was studied adjusting the amount of the food waste water injected through the nozzles. From the result, Case II showed the concentration of CO and NO_x as 1.8–10 and 14–26 ppm, respectively, while Case I showed that of CO and NO_x as 15–30 and 9–18 ppm, respectively. Those levels are well below the Korean emission criteria, 50 ppm for CO and 80 ppm for NO_x. Based on the results, it is evident there is a certain trade-off between emission of CO and NO_x, and Case II which has relatively low concentration of CO is easier and cheaper to control.     

Prioritization of water management for sustainability using hydrologic simulation model and multicriteria decision making techniques

The objective of this study is to develop an alternative evaluation index (AEI) in order to determine the priorities of a range of alternatives using both the hydrological simulation program in FORTRAN (HSPF) and multicriteria decision making (MCDM) techniques. In order to formulate the HSPF model, sensitivity analyses of water quantity (peak discharge and total volume) and quality (BOD peak concentrations and total loads) are conducted and a number of critical parameters were selected. To achieve a more precise simulation, the study watershed is divided into four regions for calibration and verification according to landuse, location, slope, and climate data. All evaluation criteria were selected using the Driver–Pressure–State–Impact–Response (DPSIR) model, a sustainability evaluation concept. The Analytic Hierarchy Process is used to estimate the weights of the criteria and the effects of water quantity and quality were quantified by HSPF simulation. In addition, AEIs that reflected residents' preferences for management objectives are proposed in order to induce the stakeholder to participate in the decision making process.     

Influence of Motivations for Seeking ISO 14001 Certification on Perceptions of EMS Effectiveness in China

This study examines the motivations of mainland Chinese facilities in seeking ISO 14001 certification and examines the linkages between these motivations and self-reports of the effectiveness of major environmental management system (EMS) components. In a sample of 128 facilities in Beijing, Shanghai, and Guangzhou, the main drivers for certification were reported to be to ensure regulatory compliance, to enhance the firms reputation, and to improve environmental performance, in that order. Although motivation to achieve cost reductions were least emphasized, a broad range of motivations appears to be considered in the decision to seek certification to ISO 14001. Regression models linking these motivations to the EMS components suggests that internal motivations have an influence on most EMS components. One interesting exception to this, however, is that no significant relationship was observed between internal motivations and the promulgation of environmental objectives and targets. The relationships associated with external motivations for certification (i.e., those in response to customer and other stakeholder pressures) and EMS components, on the other hand, are weaker and tend to occur earlier in the process cycle. No significant relationships were found between motivations to reduce costs and perceptions of the effectiveness of EMS components. Overall, these findings suggest that ISO 14001, as currently being implemented in mainland China, may have a modestly useful role when used in combination with other policy mechanisms to move the Chinese economy toward more sustainable practices. It is asserted that the ISO standard could provide even greater benefits if Chinese registrars were more proactive in developing EMS in conjunction with even more rigorous third-party audits.Published online     

Electron affinity coefficients of nitrogen oxides and biodegradation kinetics in denitrification of contaminated stream water

During the dry season in Korea, rivers become more vulnerable to contamination by biochemical oxygen demand (BOD) and nitrogen. It is hypothesized that the natural characteristics of the streams in Korea allow the contaminated water to be treated at the tributaries. Down-stream river water quality in Korea may be improved by spraying the contaminated stream water from the tributaries over the surrounding floodplains. The consequent water filtration through the soil could remove the contaminants through aerobic and denitrifying reactions. In this study, the kinetics parameters of the denitrifying reaction in floodplain filtration were determined using contaminated stream water. For the electron donor the Monod kinetics was used, while the competitive Michaelis-Menten model was employed for the electron acceptors. The parameters to the competitive Michaelis-Menten model were found using continuous denitrifying reactions, instead of the batch reactions employed in previous studies, to match the conditions needed to apply the competitive Michaelis-Menten kinetics. From the result, it was found that continuous reactions as well as batch reactions could be used to determine the affinity coefficients in denitrification. The results of this study also showed that the affinity coefficient of NO2, using continuous reactions, was similar to that of other studies in the literature found via batch reactions, whereas the affinity coefficient of N2O was much larger than that acquired with batch reactions. The parameters obtained in this study will be used in future work to simulate the contaminant behaviors during floodplain filtration using a mathematical model.     

Atmospheric Loadings,Concentrations and Visibility Associated with Sandstorms: Satellite and Meteorological Analysis

This Korea-China study monitored the phenomena of sandstorms and significant dustfall (SD) from 1997 to 2000. The analysis of our data included ground measurements of dust concentration, visibility, satellite imagery, aircraft and lidar observations. In addition, an estimation of atmospheric loadings and a studyon the relationship between dust concentrations and visibilitywere carried out. The movement and invasion of dust clouds toKorea were clearly identified with meteorological and satellitedata. The increasing concentrations of TSP and PM₁₀ concurredwell with the satellite information. From case studies, weestimated that atmospheric loadings of a dust cloud were over 1million ton and that the deposition over the Korean Peninsulawas in the range from 46 000 to 86 000 tons. For SD withvisibility of 3 km, we predict TSP 659 g m^-3 and PM₁₀ 493 g m^-3. We recommend the issuance of an SD Watch(advisory) and an SD Warning for the general public.     

Safety related questions for computer-controlled plants: derivation, organisation and application

The use of computers in process control has improved productivity and product quality but has also caused a number of accidents. If we learn from these accidents we may be able to prevent them from happening again. This paper advocates a systematic approach to deriving and organising safety-related questions from past incidents and then applying the questions to consider the safety issues related to the whole life-cycle of computer-controlled plants. Over 170 questions were derived from 300 incident reports provided by two major organisations. The questions are organised into a structured framework so that relevant questions can be located easily when considering different aspects of a computer-controlled plant. Examples illustrating the application of the questions are given. The whole set of questions is listed in the Appendix.