Internal distribution of uranium and associated genotoxic damages in the chronically exposed bivalve Corbicula fluminea

Uranium (U) internal distribution and involved effects in the bivalve Corbicula fluminea have been studied after direct chronic exposure (90 d, 10 μg.L-1). U distribution was assessed at the subcellular level (Metal Rich Granules -MRG-, pellets and cytosol fractions) in two main organs of the bivalve (gills and visceral mass). Micro-localisation was investigated by TEM-EDX analysis in the gills epithelium. DNA damage in gill and hemolymph samples was measured by the Comet assay. The 90-d exposure period led to a significant increase of U concentration in gills over time (×5) and a large U quantity in subcellular granules in gills. Finally, a significant increase (×2) in DNA damage was noted in exposed gills and haemocytes. This study shows that the accumulation levels and consequently the potential toxicity cannot be successfully predicted only on the basis of concentration in water or in tissues and subcellular fractions after chronic exposure.     

Treatment of polychlorinated biphenyls in two surface soils using catalyzed H₂O₂ propagations

Two surface soils contaminated with polychlorinated biphenyls (PCBs) collected from Superfund sites in the New England region of the United States, Fletcher Paints and Merrimack Industrial Metals, were evaluated for field treatment at the bench level using catalyzed H₂O₂ propagations (CHP—modified Fenton’s reagent). The two soils were first evaluated for the potential for in situ treatment based on two criteria: (1) temperature (<40 °C after CHP reagent addition), and (2) hydrogen peroxide longevity (>24 h). In situ CHP remediation was more applicable to the Fletcher soil, while the Merrimack soil was better suited to ex situ treatment based on temperature increases and hydrogen peroxide lifetimes. Using the highest hydrogen peroxide concentrations appropriate for in situ treatment in each soil, PCB destruction was 94% in the Fletcher soil but only 48% in the Merrimack soil. However, 98% PCB destruction was achieved in the Merrimack soil using conditions more applicable to ex situ treatment (higher hydrogen peroxide concentrations with temperatures >40 °C). Analysis of degradation products by gas chromatography/mass spectroscopy showed no detectable chlorinated degradation products, suggesting that the products of PCB oxidation were rapidly dechlorinated and degraded. The results of this research document that the two PCB-contaminated soils studied can be effectively treated using aggressive CHP conditions, and that such a detailed bench study provides important information before implementing field treatment.     

Mineralisation of target hydrocarbons in three contaminated soils from former refinery facilities

This study investigated the microbial degradation of ¹⁴C-labelled hexadecane, octacosane, phenanthrene and pyrene and considered how degradation might be optimised in three genuinely hydrocarbon-contaminated soils from former petroleum refinery sites. Hydrocarbon mineralisation by the indigenous microbial community was monitored over 23 d. Hydrocarbon mineralisation enhancement by nutrient amendment (biostimulation), hydrocarbon degrader addition (bioaugmentation) and combined nutrient and degrader amendment, was also explored. The ability of indigenous soil microflora to mineralise ¹⁴C-target hydrocarbons was appreciable; ≥16% mineralised in all soils. Generally, addition of nutrients or degraders increased the rates and extents of mineralisation of ¹⁴C-hydrocarbons. However, the addition of nutrients and degraders in combination had a negative effect upon ¹⁴C-octacosane mineralisation and resulted in lower extents of mineralisation in the three soils. In general, the rates and extents of mineralisation will be dependent upon treatment type, nature of the contamination and adaptation of the ingenious microbial community.     

Diversity in Current Ecological Thinking: Implications for Environmental Management

Current ecological thinking emphasizes that systems are complex, dynamic, and unpredictable across space and time. What is the diversity in interpretation of these ideas among today’s ecologists, and what does this mean for environmental management? This study used a Policy Delphi survey of ecologists to explore their perspectives on a number of current topics in ecology. The results showed general concurrence with nonequilibrium views. There was agreement that disturbance is a widespread, normal feature of ecosystems with historically contingent responses. The importance of recognizing multiple levels of organization and the role of functional diversity in environmental change were also widely acknowledged. Views differed regarding the predictability of successional development, whether “patchiness” is a useful concept, and the benefits of shifting the focus from species to ecosystem processes. Because of their centrality to environmental management, these different views warrant special attention from both managers and ecologists. Such divergence is particularly problematic given widespread concerns regarding the poor linkages between science (here, ecology) and environmental policy and management, which have been attributed to scientific uncertainty and a lack of consensus among scientists, both jeopardizing the transfer of science into management. Several suggestions to help managers deal with these differences are provided, especially the need to interpret broader theory in the context of place-based assessments. The uncertainty created by these differences requires a proactive approach to environmental management, including clearly identifying environmental objectives, careful experimental design, and effective monitoring.     

Quantifying Reductions of Mass‐Failure Frequency and Sediment Loadings From Streambanks Using Toe Protection and Other Means: Lake Tahoe,United States1

Abstract: Streambank erosion by mass‐failure processes represents an important form of channel adjustment and a significant source of sediment in disturbed streams. Mass failures regularly occur by a combination of hydraulic processes that undercut bank toes and geotechnical processes that cause bank collapse by gravity. Little if any quantitative information is available on the effectiveness of bank treatments on reducing erosion. To evaluate potential reduction in sediment loadings emanating from streambanks, the hydraulic and geotechnical processes responsible for mass failure were simulated under existing and mitigated conditions using a Bank‐Stability and Toe‐Erosion Model (BSTEM). Two critical erosion sites were selected from each of the three watersheds known to contribute the greatest amounts of fine sediment by streambank processes in the Lake Tahoe Basin. A typical high‐flow annual hydrograph was selected for analysis. Bank‐material strength data were collected for each layer as were species‐specific root‐reinforcement values. The effects of the first flow event on bank‐toe erosion were simulated using an excess shear‐stress approach. The resulting geometry was then exported into the bank‐stability submodel to test for the relative stability of the bank under peak flow and drawdown conditions. In this way, BSTEM was used iteratively for all flow events for both existing and mitigated conditions. On average, 13.6% of the material was eroded by hydraulic shear, the remainder by mass failures, which occurred about five times over the simulation period. Simulations with 1.0 m‐high rock‐toe protection showed a dramatic reduction in streambank erosion (69‐100%). Failure frequency for the simulation period was reduced in most cases to a single episode. Thus, an almost 90% reduction in streambank loadings was achieved by virtually eliminating the erosion of only 14% of the material that was entrained by hydraulic forces. Consequently, simulations show average load reductions of about an order of magnitude. Results stress the critical importance of protecting the bank toe‐region from steepening by hydraulic forces that would otherwise entrain previously failed and in situ bank materials, thereby allowing the upper bank to flatten (by failure) to a stable slope.     

A Calibrated,High‐Resolution GOES Satellite Solar Insolation Product for a Climatology of Florida Evapotranspiration1

Paech, Simon J., John R. Mecikalski, David M. Sumner, Chandra S. Pathak, Quinlong Wu, Shafiqul Islam, and Taiye Sangoyomi, 2009. A Calibrated, High‐Resolution GOES Satellite Solar Insolation Product for a Climatology of Florida Evapotranspiration. Journal of the American Water Resources Association (JAWRA) 45(6):1328‐1342. Abstract: Estimates of incoming solar radiation (insolation) from Geostationary Operational Environmental Satellite observations have been produced for the state of Florida over a 10‐year period (1995‐2004). These insolation estimates were developed into well‐calibrated half‐hourly and daily integrated solar insolation fields over the state at 2 km resolution, in addition to a 2‐week running minimum surface albedo product. Model results of the daily integrated insolation were compared with ground‐based pyranometers, and as a result, the entire dataset was calibrated. This calibration was accomplished through a three‐step process: (1) comparison with ground‐based pyranometer measurements on clear (noncloudy) reference days, (2) correcting for a bias related to cloudiness, and (3) deriving a monthly bias correction factor. Precalibration results indicated good model performance, with a station‐averaged model error of 2.2 MJ m^?2/day (13%). Calibration reduced errors to 1.7 MJ m^?2/day (10%), and also removed temporal‐related, seasonal‐related, and satellite sensor‐related biases. The calibrated insolation dataset will subsequently be used by state of Florida Water Management Districts to produce statewide, 2‐km resolution maps of estimated daily reference and potential evapotranspiration for water management‐related activities.     

Screening and selection of sites for CO2 sequestration based on pressure buildup

This paper presents a simple methodology for estimating pressure pressure buildup due to the injection of supercritical CO₂into a saline formation, and the limiting pressure at which the formation starts to fracture. Pressure buildup is calculated using the approximate solution of Mathias et al. [Mathias, S.A., Hardisty, P.E., Trudell, M.R., Zimmerman, R.W., 2009. Approximate solutions for pressure buildup during CO₂ injection in brine aquifers. Transp. Porous Media. doi:10.1007/s11242-008-9316-7], which accounts for two-phase Forchheimer flow (of supercritical CO₂ and brine) in a compressible porous medium. Compressibility of the rock formation and both fluid phases are also accounted for. Injection pressure is assumed to be limited by the pressure required to fracture the rock formation. Fracture development is assumed to occur when pore pressures exceed the minimum principal stress, which in turn is related to the Poisson’s ratio of the rock formation. Detailed guidance is also offered concerning the estimation of viscosity, density and compressibility for the brine and CO₂. Example calculations are presented in the context of data from the Plains CO₂ Reduction (PCOR) Partnership. Such a methodology will be useful for screening analysis of potential CO₂ injection sites to identify which are worthy of further investigation.     

Predicting driver drowsiness using vehicle measures: Recent insights and future challenges

Introduction

Driver drowsiness is a significant contributing factor to road crashes. One approach to tackling this issue is to develop technological countermeasures for detecting driver drowsiness, so that a driver can be warned before a crash occurs.

Method

The goal of this review is to assess, given the current state of knowledge, whether vehicle measures can be used to reliably predict drowsiness in real time.

Results

Several behavioral experiments have shown that drowsiness can have a serious impact on driving performance in controlled, experimental settings. However, most of those studies have investigated simple functions of performance (such as standard deviation of lane position) and results are often reported as averages across drivers, and across time.

Conclusions

Further research is necessary to examine more complex functions, as well as individual differences between drivers.

Impact on Industry

A successful countermeasure for predicting driver drowsiness will probably require the setting of multiple criteria, and the use of multiple measures.     

A simultaneous equations model of crash frequency by collision type for rural intersections

Safety at roadway intersections is of significant interest to transportation professionals due to the large number of intersections in transportation networks, the complexity of traffic movements at these locations that leads to large numbers of conflicts, and the wide variety of geometric and operational features that define them. A variety of collision types including head-on, sideswipe, rear-end, and angle crashes occur at intersections. While intersection crash totals may not reveal a site deficiency, over exposure of a specific crash type may reveal otherwise undetected deficiencies. Thus, there is a need to be able to model the expected frequency of crashes by collision type at intersections to enable the detection of problems and the implementation of effective design strategies and countermeasures. Statistically, it is important to consider modeling collision type frequencies simultaneously to account for the possibility of common unobserved factors affecting crash frequencies across crash types. In this paper, a simultaneous equations model of crash frequencies by collision type is developed and presented using crash data for rural intersections in Georgia. The model estimation results support the notion of the presence of significant common unobserved factors across crash types, although the impact of these factors on parameter estimates is found to be rather modest.     

Forty years of atmospheric radiocarbon monitoring around Bohunice nuclear power plant, Slovakia

Radiocarbon variations in the atmospheric CO(2) with attenuating amplitudes and decreasing mean values with typical maxima in summer and minima in winter have been observed since 1967 in two localities of Slovakia, in Bratislava and Zlkovce, situated about 60 km NE from Bratislava, only 5 km from the Bohunice Nuclear Power Plant (NPP). The (14)C record in Bratislava has been influenced mainly by fossil CO(2) emissions, in contrast to the Zlkovce record which has been more variable, as it has clearly been affected by operation of the Bohunice NPP. However, during specific meteorological conditions with NE transport of air masses to Bratislava, the effect of the Bohunice NPP has been visible in Bratislava as well. Maximum (14)C concentrations (up to 120% above a natural background) were observed around A1 NPP which used CO(2) with admixture of air as a cooling agent. The (14)C concentrations around four pressurized light water reactors were up to 30% above the background. The Delta(14)C values in the heavily polluted atmosphere of Bratislava were up to 10% and at Zlkovce up to 5% lower than the European clean air represented by the Jungfraujoch Delta(14)C data. Later the Delta(14)C values were similar at both sites, and from 2003 they were close to the European clean air levels. The observed Delta(14)C behaviour in the atmosphere provides a unique evidence of decreased fossil fuel CO(2) emissions in the region, as well as the long-term effect of the Bohunice NPP on the Bratislava and Zlkovce stations. The estimated annual radiation doses to the local public due to digestion of radiocarbon contaminated food have been estimated to be around 3 microSv.