The use of polymer compounds in the deposits from the combustion of briquettes in domestic heating as an identifier of fuel quality

Environmental Science and Pollution Research - The utilisation of waste wood from furniture production brings new problems connected with an incomplete thermochemical decomposition of additives...     

Physiological responses of beet and cabbage plants exposed to copper and their potential insertion in human food chain

Environmental Science and Pollution Research - Copper (Cu) can be toxic to vegetables when it is absorbed and accumulated at large concentrations, a fact that increases the risk of excessive...     

Solar heterogeneous photocatalytic degradation of phenol on TiO2/quartz and TiO2/calcite: a statistical and kinetic approach on comparative efficiencies towards a TiO2/glass system

Environmental Science and Pollution Research - Phenol is a widely used synthetic organic compound, which according to global estimations, is discharged into the environment at a rate of 10...     

Photocatalysis for arsenic removal from water: considerations for solar photocatalytic reactors

Environmental Science and Pollution Research - The following work provides a perspective on the potential application of solar heterogeneous photocatalysis, which is a nonselective advanced...     

Electrochemical decolourisation of structurally different dyes

The electrochemical decolourisation of structurally different dyes (bromophenol blue, indigo, poly R-478, phenol red, methyl orange, fuchsin, methyl green and crystal violet) by means of the application of DC electric current was assessed. It was found that the electrochemical process allowed a colour removal of all dyes studied, although the decolourisation rate largely depended on the chemical structure of the different dyes. Nearly complete decolourisation was achieved for bromophenol blue followed by methyl orange and methyl green, whereas phenol red was hardly decolourised (30% in 60 min). In mixtures of two dyes, the decolourisation rate became similar for both dyes. However, the addition of a redox mediator, (Co(2+/3+)) clearly enhanced the degradation rate of all tested dyes, but the simplest dye molecules were attacked firstly, followed by dyes with more complex chemical structures. The results revealed the suitability of the process to effectively decolourise wastewaters from dyeing process.     

Evaluation of relative photonic efficiency in heterogeneous photocatalytic reactors

The evaluation of photonic efficiency in heterogeneous photocatalysis remains elusive because the number of absorbed photons is difficult to assess experimentally. The photonic efficiency of heterogeneous photocatalytic reactors depends on the reactor geometry, irradiation source, and photocatalyst properties. In this work, the relative photonic efficiency of heterogeneous photocatalytic reactors to degrade an azo dye was evaluated using phenol as the standard system. The experimental tests were carried out in a batch reactor under different conditions of pH, catalyst dosage, initial concentration, and ultraviolet (UV) lamps. The kinetics of disappearance of both phenol and azo dye were studied using the initial rate method and were described according to the Langmuir-Hinshelwood (L-H) kinetic model. It was observed that the relative photonic efficiency depends on the adsorption/desorption properties of the photocatalyst.     

Quantification of nitrogen in the liquid fraction and in vitro assessment of lysine bioavailability in the solid fraction of soybean meal hydrolysates

Soybean meal (SBM) is a product generated from the manufacture of soybean oil and has the potential for use as a source of fermentable sugars for ethanol production or as a protein source for animal feeds. Knowing the levels of nitrogen available from ammonium is a necessary element of the ethanolic fermentation process while identifying the levels of essential amino acids such as lysine is important in determining usage as a feed source. As such the purpose of this study was to quantify total nitrogen and ammonium in the liquid fraction of hydrolyzed SBM and to evaluate total and bioavailable lysine in the solid fraction of the hydrolyzed SBM. The effects of acid concentration, cellulase and β-glucosidase on total and ammonium nitrogen were studied with analysis indicating that higher acid concentrations increased nitrogen compounds with ammonium concentrations ranging from 0.20 to 1.24 g L^?1 while enzymatic treatments did not significantly increase nitrogen levels. Total and bioavailable lysine was quantified by use of an auxotrophic gfpmut3 E.coli whole-cell bioassay organism incapable of lysine biosynthesis. Acid and enzymatic treatments were applied with lysine bioavailability increasing from a base of 82% for untreated SBM to up to 97%. Our results demonstrated that SBM has the potential to serve in ethanolic fermentation and as an optimal source essential amino acid lysine.     

Factors affecting the quantitative uncertainty of the estimated short-term intake. Part I—Calculation methods

ABSTRACT

The calculation of the combined uncertainty of the international estimated short-term intake (IESTI) of ethephon residues in apples is shown as an example. The ethephon residues in apples were reported by the Joint FAO (Food and Agriculture Organization of the United Nations)/WHO (World Health Organization) Meeting on Pesticide Residues (JMPR). The apple consumption data were taken from the IESTI (international short-term intake) calculation template used by the JMPR. The IESTI was calculated with the currently used method (case 2a) and a proposed one recommended by the EFSA (European Food Safety Authority)/RIVM (Dutch National Institute for Public Health) Scientific Workshop co-sponsored by FAO and WHO. In this example, the ratio of IESTI_proposed/IESTI_current and their combined relative uncertainty are about 2.8, and 1.7, respectively. The larger IESTI and uncertainty obtained with the proposed equation are the consequence of calculation only with the large portion (LP) instead of its combination with unit mass, and the MRL instead of the highest residue (HR). The LP is the major contributor to the combined uncertainty. Both the calculated IESTI and its combined uncertainty depend on the actual food – pesticide residue combination, and should be calculated for each case.     

Effect of the veterinary ionophore monensin on the structure and activity of a tropical soil bacterial community

Abstract

Monensin (MON) is a coccidiostat used as a growth promoter that can reach the environment through fertilization with manure from farm animals. To verify whether field-relevant concentrations of this drug negatively influence the structure and activity of tropical soil bacteria, plate counts, CO₂ efflux measurements, phospholipid fatty acids (PLFA) and community-level physiological profiling (CLPP) profiles were obtained for soil microcosms exposed to 1 or 10?mg kg^?1 of MON across 11?days. Although 53% (1?mg kg^?1) to 40% (10?mg kg^?1) of the MON concentrations added to the microcosms dissipated within 5?days, a subtle concentration-dependent decrease in the number of culturable bacteria (<1 log CFU g^?1), reduced (?20 to ?30%) or exacerbated (+25%) soil CO₂ effluxes, a marked shift of non-bacterial fatty acids, and altered respiration of amines (1.22-fold decrease) and polymers (1.70-fold increase) were noted in some of the treatments. These results suggest that MON quickly killed some microorganisms and that the surviving populations were selected and metabolically stimulated. Consequently, MON should be monitored in agronomic and environmental systems as part of One Health efforts.