Comparison of seasonal variations of ozone exposure and fluxes in a Mediterranean Holm oak forest between the exceptionally dry 2003 and the following year

Ozone and energy fluxes have been measured using the eddy covariance technique, from June to December 2004 in Castelporziano near Rome (Italy), and compared to similar measurements made in the previous year. The studied ecosystem consisted in a typical Mediterranean Holm oak forest. Stomatal fluxes have been calculated using the resistance analogy and by inverting the Penmann-Monteith equation. Results showed that the average stomatal contribution accounts for 42.6% of the total fluxes. Non-stomatal deposition proved to be enhanced by increasing leaf wetness and air humidity during the autumnal months. From a comparison of the two years, it can be inferred that water supply is the most important limiting factor for ozone uptake and that prolonged droughts alter significantly the stomatal conductance, even 2 months after the soil water content is replenished. Ozone exposure, expressed as AOT40, behaves similarly to the cumulated stomatal flux in dry conditions whereas a different behaviour for the two indices appears in wet autumnal conditions. A difference also occurs between the two years.     

Assessment of Ni accumulation capability by fungi for a possible approach to remove metals from soils and waters

ABSTRACT

Abandoned industrial sites and mines may constitute possible hazards for surrounding environment due to the presence of toxic compounds that may contaminate soils and waters. The possibility to remove metal contaminants, specifically nickel (Ni), by means of fungi was presented exploiting a set of fungal strains isolated from a Ligurian dismissed mine. The achieved results demonstrate the high Ni(II) tolerance, up to 500 mg Ni l^?1, and removal capability of a Trichoderma harzianum strain. This latter hyperaccumulates up to 11,000 mg Ni kg^?1, suggesting its possible use in a bioremediation protocol able to provide a sustainable reclamation of broad contaminated areas.     

Biochar and earthworm effects on soil nitrous oxide and carbon dioxide emissions

Biochar is the product of pyrolysis produced from feedstock of biological origin. Due to its aromatic structure and long residence time, biochar may enable long-term carbon sequestration. At the same time, biochar has the potential to improve soil fertility and reduce greenhouse gas (GHG) emissions from soils. However, the effect of biochar application on GHG fluxes from soil must be investigated before recommendations for field-scale biochar application can be made. A laboratory experiment was designed to measure carbon dioxide (CO) and nitrous oxide (NO) emissions from two Irish soils with the addition of two different biochars, along with endogeic (soil-feeding) earthworms and ammonium sulfate, to assist in the overall evaluation of biochar as a GHG-mitigation tool. A significant reduction in NO emissions was observed from both low and high organic matter soils when biochars were applied at rates of 4% (w/w). Earthworms significantly increased NO fluxes in low and high organic matter soils more than 12.6-fold and 7.8-fold, respectively. The large increase in soil NO emissions in the presence of earthworms was significantly reduced by the addition of both biochars. biochar reduced the large earthworm emissions by 91 and 95% in the low organic matter soil and by 56 and 61% in the high organic matter soil (with and without N fertilization), respectively. With peanut hull biochar, the earthworm emissions reduction was 80 and 70% in the low organic matter soil, and only 20 and 10% in the high organic matter soil (with and without N fertilization), respectively. In high organic matter soil, both biochars reduced CO efflux in the absence of earthworms. However, soil CO efflux increased when peanut hull biochar was applied in the presence of earthworms. This study demonstrated that biochar can potentially reduce earthworm-enhanced soil NO and CO emissions. Hence, biochar application combined with endogeic earthworm activity did not reveal unknown risks for GHG emissions at the pot scale, but field-scale experiments are required to confirm this.     

Phthalates and perfluorinated alkylated substances in Atlantic bluefin tuna (Thunnus thynnus) specimens from Mediterranean Sea (Sardinia,Italy): Levels and risks for human consumption

Atlantic blue fin tuna (Thunnus thynnus) is a species of great importance for Mediterranean Sea area, from both ecological and commercial points of view. The scientific literature reports few data on the contamination of this fish by emerging organic compounds such as perfluorinated alkylated substances(PFASs) and phthalates, being the latter never been studied in tuna. This study therefore investigated the presence of the PFASs perfluorooctane sulphonate (PFOS) and perfluoroctanoic acid (PFOA) and the phthalate di-2-ethylhexyl phthalate (DEHP), also monitored by its metabolite mono-2-ethylhexyl phthalate(MEHP), to assess both the state of contamination of Atlantic bluefin tuna specimen and the risk due to the toxicity of these compounds for human consumption. While PFOA was never found, detectable levels of PFOS (0.4–1.88 ng/g), DEHP (9–14.62 ng/g) and MEHP (1.5–6.30 ng/g) were found. The results were elaborated relating the accumulation to the size and age of the individuals and showed a correlation between the levels of different pollutants investigated.     

Biogas upgrading and utilization from ICEs towards stationary molten carbonate fuel cell systems

Biogas production from anaerobic digestion has increased rapidly in the last years, in many parts of the world, mainly due to its local scale disposition and to its potential on greenhouse gases (GHG) emissions mitigation. Biogas can be used as fuel for combined heat and power systems (CHP), in particular for internal combustion engines (ICEs). In recent investigations, fuel cells have been considered as alternative CHP systems. In the present article, two different energy conversion systems are compared: a 1.4 MW class MCFC system, running on pipeline natural gas, and an in situ ICE, running on biogas. In the first case, biogas is considered as a source fuel to obtain upgraded gas to be injected in the natural gas grid. In such scenario, the location of the fuel cell power plant is no longer strictly connected to the anaerobic digester site. Several energy balances are evaluated, considering different upgrading techniques and different biogas methane/carbon dioxide ratios.     

Future land use and land cover in Southern Amazonia and resulting greenhouse gas emissions from agricultural soils

Regional Environmental Change - The calculation of robust estimates of future greenhouse gas emissions due to agriculture is essential to support the framing of the Brazilian climate change...     

Evaluation of levels, sources and distribution of toxic elements in PM10 in a suburban industrial region, Rio de Janeiro, Brazil

The Oswaldo Cruz Foundation Campus (FIOCRUZ), in a suburban region of the city of Rio de Janeiro, was selected as a case study to assess the pollution released from vehicle and industrial facilities in Basin III, the most polluted area of the city. Concentrations of particulate matter (PM10) and trace metals in airborne particles were determined in an intensive field campaign. The samplings were performed every six days for 24 h periods, using a PM10 high volume sampler, from September 2004 to August 2005. PM10 mass concentrations were determined gravimetrically and the metals by ICP-OES. For PM10, the arithmetic mean for the period is 169 ± 42 μg m⁻³ which is 3.4 times the national recommended standard of 50 μg m⁻³. Additionally, 51% of the samplings exceeded the recommended 24 h limit of 150 μg m⁻³. Ca, Mg, Fe, Zn and Al were the metals that presented the higher concentrations. The correlation matrix gave two main clusters and three significant principal components (PC). Both PC1 and PC2 are associated to crustal, vehicular and industrial emissions while PC3 is mainly associated to geological material. Enrichment factors for Zn, Cu, Cd and Pb indicate that for these elements, anthropic sources prevail over natural inputs. PM10 levels showed a good correlation with hospital admissions for respiratory diseases in children and elderly people.     

Exergy and extended exergy accounting of very large complex systems with an application to the province of Siena, Italy

This paper describes the application of exergy and extended exergy analyses to large complex systems. The system to be analysed is assumed to be at steady state, and the input and output fluxes of matter and energy are expressed in units of exergy. Human societies of any reasonable extent are indeed Very Large Complex Systems and can be represented as interconnected networks of N elementary "components", their Subsystems; the detail of the disaggregation depends on the type and quality of the available data. The structural connectivity of the "model" of the System must correctly describe the interactions of each mass or energy flow with each sector of the society: since it is seldom the case that all of these fluxes are available in detail, some preliminary mass- and energy balances must be completed and constitute in fact a part of the initial assumptions. Exergy accounting converts the total amount of resources inflow into their equivalent exergetic form with the help of a table of "raw exergy data" available in the literature. The quantification of each flow on a homogeneous exergetic basis paves the way to the evaluation of the efficiency of each energy and mass transfer between the N sectors and makes it possible to quantify the irreversible losses and identify their sources. The advantage of the EEA, compared to a classical exergy accounting, is the inclusion in the system balance of the exergetic equivalents of three additional "Production Factors": human Labour, Capital and Environmental Remediation costs. EEA has an additional advantage: it allows for the calculation of the efficiency of the domestic sector (impossible to evaluate with any other energy- or exergy-based method) by considering the working hours as its product. As implied in the title, an application of the method was made to a model of the province of Siena (on a year 2000 database): the results show that the sectors of this Province have values of efficiency close to the Italian average, with the exception of the commercial and energy conversion sectors that are more efficient, in agreement with the rather peculiar socio-economic situation of the Province. The largest inefficiency is found to be in the transportation sector, which has an efficiency lower then 30% in EEA and lower than 10% in classical exergy accounting.