An assessment of municipal solid waste compost quality produced in different cities of India in the perspective of developing quality control indices

A study was conducted to investigate physico-chemical properties, fertilizing potential and heavy metal polluting potentials of municipal solid waste composts produced in 29 cities of the country. Results indicated that except a very few samples, all other samples have normal pH and EC. Organic matter as well as major nutrients N and P contents in MSW composts are generally low as compared to the composts prepared from rural wastes. Heavy metal contents in composts from bigger cities (>1 million population) were higher by about 86% for Zn, 155% for Cu, 194% for Cd, 105% for Pb, 43% for Ni and 132% for Cr as compared to those from smaller cities (<1 million population). Composts prepared from source separated biogenos wastes contained, on average, higher organic matter (by 57%), total N (by 77%) and total P (by 78%), but lower concentrations of heavy metals Zn (by 63%), Cu (by 78%), Cd (by 64%), Pb (by 84%), Ni (by 50%), and Cr (by 63%) as compared to those prepared from mixed wastes. Partial segregation at the site of composting did not improve quality of compost significantly in terms of fertilizing parameters and heavy metal contents. Majority of MSW composts did not conform to the quality control guideline of ‘The Fertilizer (Control) Order 1985’ in respect of total organic C, total P, total K as well as heavy metals Cu, Pb and Cr. In order to enable the relevant stakeholders to judge overall quality, a scheme has been proposed for the categorization of composts into different marketable classes (A, B, C, and D) and restricted use classes (RU-1, RU-2, and RU-3) on the basis their fertilizing potential and as well as potential for contaminating soil and food chain. Under the scheme, ‘Fertilizing index’ was calculated from the values of total organic C, N, P, K, C/N ratio and stability parameter, and ‘Clean index’ was calculated from the contents of heavy metals, taking the relative importance of each of the parameters into consideration. As per the scheme, majority of the compost samples did not belong to any classes and hence, have been found unsuitable for any kind of use. As per the regulatory limits of different countries, very few compost samples (prepared from source separated biogenos wastes) were found in marketable classes (A, B, C and D) and some samples (11–14) were found suitable only for some restricted use.     

A new system for groundwater contamination hazard rating of landfills

In developing countries, several unregulated landfills exist adjacent to large cities, releasing harmful contaminants to the underlying aquifer. Normally, landfills are constructed to hold three types of waste, namely hazardous waste, municipal solid waste, and construction and demolition waste. Hazardous waste and municipal solid waste landfills are of greater importance as these pose greater hazard to groundwater, in comparison with landfills holding waste from construction and demolition. The polluting landfills need to be prioritized to undertake necessary control and remedial measures. This paper assesses existing site hazard rating systems and presents a new groundwater contamination hazard rating system for landfills, which can be used for site prioritization. The proposed system is based on source-pathway-receptor relationships and evaluates different sites relative to one another. The system parameters have been selected based on literature. The Delphi technique is used to derive the relative importance weights of the system parameters. The proposed system is compared with nine existing systems. The comparison shows that the site hazard scores produced by the existing systems for hazardous waste, municipal solid waste, and construction and demolition waste landfills are of the same order of magnitude and tend to overlap each other but the scores produced by the proposed system for the three types of landfills vary almost by an order of magnitude, which shows that the proposed system is more sensitive to the type of waste. The comparison further shows that the proposed system exhibits greater sensitivity also to varied site conditions. The application of different systems to six old municipal solid waste landfills shows that whereas the existing systems produce clustered scores, the proposed system produces significantly differing scores for all the six landfills, which improves decision making in site ranking. This demonstrates that the proposed system makes a better tool for prioritization of landfills for adopting control measures and remediation.     

Pesticide tolerance of Paenibacillus sp. D1 and its chitinase

Excessive use of pesticides in agriculture has led to several problems pertaining to loss of soil fertility and environmental degradation. Biological control agents offer the best alternative to reduce use of toxic pesticides. Paenibacillus sp. D1 isolated from the effluent treatment plant of a seafood processing industry exhibited broad spectrum tolerance towards a number of pesticides at concentrations higher than recommended for field applications. The isolate showed enhanced growth and chitinase production in the presence of some protectant fungicides. None of the tested demethylase inhibitor (DMI) fungicides inhibited growth and chitinase production except triadimefon. The isolate was also tolerant to most commonly used insecticides belonging to the organophosphate, carbamate and cyclodiene organochloride classes. Chitinase of Paenibacillus sp. D1 was found to be more tolerant than the organism itself and was highly stable in the presence of pesticides at the temperature under field conditions in Gujarat, India, i.e. 40 °C. This was suggestive of its potential in integrated pest management (IPM) to significantly reduce the use of harmful chemicals. To our knowledge this is the first extensive study on pesticide tolerance of the Paenibacillus species and its chitinase.     

Thermal Modeling and Performance Evaluation of Photovoltaic Thermal (PV/T) Systems: A Parametric Study

Conventional solar photovoltaic (PV) module converts the light component of solar radiation into electrical power, and heat part is absorbed by module increasing its operating temperature. Combined PV module and heat exchanger generating both electrical and thermal powers is called as hybrid photovoltaic/thermal (PV/T) solar system. The paper presents the design of a PV/T collector, made with thin film PV technology and a spiral flow absorber, and a simulation model, developed through the system of several mathematical equations, to evaluate the performance of PV/T water collectors. The effect of various parameters on the thermal and electrical efficiency has been investigated to obtain optimum combination of parameters. Finally, a numerical simulation has been carried out for the daily and annual yield of the proposed PV/T collector, and comparison with a standard PV module is discussed.     

Correction to: Influence of physico-chemical properties of soil clay fractions on the retention of dissolved organic carbon

Environmental Geochemistry and Health - Unfortunately, in the original publication of the article, Prof. Yong Sik Ok’s affiliation was incorrectly published. The author’s affiliation is...     

Impacts of industrial waste resources on maize (Zea mays L.) growth,yield, nutrients uptake and soil properties

Discharging untreated highly acidic (pH < 4.0), organic and nutrients rich monosodium glutamate wastewater (MW), and highly alkaline (pH > 10.0) paper-mill wastewater (PW) causes environmental pollution. When acidity of MW neutralized (pH 6.5 ± 0.1) with PW and lime (treatments represented as MW + PW and MW + Lime), then MW may be utilized as a potential source of nutrients and organic carbon for sustainable food production. Objectives of this study were to compare the effects of PW and lime neutralized MW and chemical fertilizers on maize (Zea mays L. cv. Snow Jean) plant growth, yield, nutrients uptake, soil organic matter and humic substances. The field experiment was carried out on maize using MW at 6000 L ha^?1. Impacts of the MW application on maize crop and soil properties were evaluated at different stages. At harvest, plant height, and plant N and K uptake were higher in MW treatment. Leaf area index at 60 days after sowing, plant dry matter accumulation at harvest, and kernels ear^?1 and 100-kernel weight were higher in MW + Lime treatment. Kernel N, P, K, Mn, Fe and Zn, and plant Zn uptake were highest in MW + Lime. Plant Fe uptake, and soil organic matter and humic substances were highest in MW + PW. The MW + PW and MW + Lime treatments exhibited comparable results with chemically fertilized treatment. The MW acidity neutralized with lime showed positive impacts on growth, yield and nutrients uptake; nevertheless, when MW pH neutralized with PW has an additional benefit on increase in soil organic matter and humic substances.     

DERIVATION OF SURFACE WATER LAG TIME FOR CONVERGING OVERLAND FLOW1

ABSTRACT: This study presents generalized and special forms of hydraulic solutions of surface water lag time, as conceptualized by Overton (1970), for the converging overland flow. It is shown that these solutions can be used to estimate lag time from physically measurable information on a given watershed.     

Effect of alloxan induced diabetes on liver and kidney function in arsenic treated rats

Experiments were performed to study the effects of inorganic arsenic (iAs) on liver and kidney functions of diabetic rats. Data showed that arsenic concentration decreases in the liver and kidneys of rats in hyperglycemic conditions. Alanine aminotransferase (ALT) activity was markedly less in arsenic-diabetic rats compared to arsenic alone; however, hyperbilirubinemia was observed in arsenic-diabetic animals. Creatinine values showed improved kidney function in arsenic-diabetic rats compared to arsenic alone. Histopathological observations were less severe in inorganic arsenic liver and kidneys of alloxan-diabetic rats. These observations were considered to be important since they partially argue against earlier reports that demonstrated a diabetogenic effect attributed to arsenic.     

Nanotechnologies,engineered nanomaterials and occupational health and safety – A review

The significance of engineered nanomaterials (ENM) and nanotechnologies grows rapidly. Nanotechnology applications may have a positive marked impact on many aspects of on human every day life, for example by providing means for the production of clean energy and pure drinking water. Hundreds of consumer nano-based products are already on the market. However, very little is known of the risks of ENM to occupational safety and health (OSH), even though workers are likely to be at extra risk, as compared with other potentially exposed groups of people, because the levels of exposure are usually higher at workplaces than in other environments. However, knowledge of the exposure to, or effects of, ENM on human health and safety in occupational environments is limited and does not allow reliable assessment of risks of ENM on workers’ health. Several issues related to ENM in the workplaces require marked attention. The most topical issues include: (1) improved understanding of ENM metrics associated with ENM toxicity; (2) development of monitoring devices for ENM exposure assessment; (3) understanding the changes of ENM structure and state of agglomeration at different concentrations in aerosols; (4) understanding translocation of ENM in the human body; (5) identifying the key health effects of ENM including pulmonary toxicity, genotoxicity, carcinogenic effects, and effects on circulation; (6) development of tiered approaches for testing of safety of ENM; and (7) utilizing these data for health risk assessment, with a special emphasis on occupational environment. Available data on several ENM – ability to enter the body and reach almost any organ, to cause pulmonary inflammation and fibrosis, and even to cause increased risk of mesotheliomas in animal models, call for immediate action. It is crucial to identify those ENM that may cause occupational health and safety risks from those ENM which are innocent, hence allowing prioritization of regulatory and preventive actions at workplaces at national, regional and global levels.