Reduced downward mobility of metribuzin in fly ash-amended soils

Metribuzin, a triazine herbicide, is poorly sorbed in the soils, therefore leaches to lower soil profile. Fly ash amendment, which enhanced metribuzin sorption in soils, may play a significant role in reducing the downward mobility of herbicide. Therefore, the present study reports the effect of Inderprastha fly ash amendment on metribuzin leaching in three soil types. Fly ash was amended at 1, 2 and 5% levels in the upper 15 cm of 30 cm long packed soil columns. Results suggested a significant reduction in the leaching losses of metribuzin in fly ash-amended columns of all the three soil types and effect increased with increase in the level of fly ash. Even after percolating water equivalent to 362 mm rainfall no metribuzin was recovered in the leachate of 5% fly ash-amended columns. Fly ash application affected both metribuzin breakthrough time and its maximum concentration in the leachate. Further, it resulted in greater retention of metribuzin in the application zone and better effect was observed in the organic carbon poor soils.     

Persistence,degradation and leaching of coumaphos in soil

Abstract

Dissipation, degradation and leaching of fresh ¹⁴C coumaphos, alkylated ¹⁴C coumaphos and aged residues of ¹⁴C coumaphos from vats were studied in alkaline sandy loam soil in soil columns in the field under subtropical conditions in Delhi for a year. Dissipation, degradation and bound residue formation was more in case of alkali treated coumaphos than fresh coumaphos. After 365 days total residues of fresh coumaphos accounted for 33.25% while that of alkali treated coumaphos was 19.12%. Bound residue formation was almost double in case of alkali treated coumaphos (18.95%) than fresh coumaphos (9.53%) after 150 days followed by release of bound residue in both the cases. The proportion of metabolites 4 ‐ methylumbelliferone, chlorferon and potasan collectively was 86.05% in fresh coumaphos extractable residues while the same was 91.74% in alkali treated coumaphos after 365 days. Aged residues from vats containing copper sulphate and buffer were found to be more persistent in soil as total residues remained were 95.58% in comparison with 83.09% total residues of aged residues from vats containing only buffer after 150 days of treatment. Copper sulphate seems to inhibit the degradatiion of coumaphos in soil by microorganisms. Chlorferon was the major metabolite in generally all the samples. Coumaphos did not leach below 10 cm in all the cases.     

Effect of UV radiation and temperature on mineralization and volatilization of coumaphos in water

This study was undertaken to determine the dissipation and degradation of coumaphos [O-(3-chloro-4-methyl-2-oxo-2H-1-benzopyran-7-yl) O,O-diethyl phosphorothioate] under different sunlight conditions and at different temperatures. The effect of the ultra violet (UV) component of solar radiation was also studied using quartz tubes in addition to other radiation in the visible range using glass tubes and the results were compared with those obtained under the dark light conditions. Water suspensions of coumaphos were incubated at three temperatures viz. 22°C, 37°C and 53°C in closed systems to study the effect of temperature. Volatilization, mineralization and degradation of coumaphos increased with an increase in temperature and exposure to solar radiation, particularly under the UV component of the solar radiation. Major loss of the pesticide occurred through volatilization. The optimum temperature for the degradation of coumaphos was found to be at 37°C. The data obtained from the mineralization and degradation studies indicated that 53°C crosses the biological range for suitable growth of microorganism. UV radiation exposure along with maintaining temperature at 37°C may prove useful in the dissipation and/or degradation of coumaphos prior to its disposal as waste from cattle dipping vats.     

Fate of parathion in soil under sub‐tropical field conditions

Abstract

Persistence, metabolism and binding of ¹⁴C‐parathion in alkaline sandy loam soil under sub‐tropical conditions of Delhi were studied for 545 days. After 3 days of treatment, ¹⁴C‐residues declined to 41% of the amount applied. The dissipation curve was biphasic; an initial rapid phase (up to 7 days) followed by slow dissipation. The half life of dissipation was only 3.36 days for the first phase and 84 days for the slow phase. The overall half life was 64.5 days. The total residues at zero‐time were 10.65 μg/g dry soil and were almost totally extractable. The extracts consisted of parathion, 4‐aminophenol, 4‐nitrophenol and paraoxon. The bound residues gradually increased and accounted for the total residue at the end of one year (0.7 μg/g).     

Development of controlled release nanoformulations of carbendazim employing amphiphilic polymers and their bioefficacy evaluation against Rhizoctonia solani

Controlled release nanoformulations of carbendazim (Methyl 1H-benzimidazol-2-ylcarbamate), a systemic fungicide, have been prepared using laboratory synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers. The release kinetics of carbendazim from developed controlled release (CR) formulations was studied and compared with that of the commercially available 50% Wettable Powder (WP). Further, the bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Rhizoctonia solani by the poison food technique method. The release of maximum amount of carbendazim from developed formulations was dependent on the molecular weight of PEGs and was found to increase with increasing molecular weights. The range of carbendazim release was found to be between 10th to 35th day as compared to commercial formulation which was up to 7th day. The diffusion exponent (n value) of carbendazim in water ranged from 0.37 to 0.52 in the tested formulations. The half-release (t_1/2) values ranged between 9.47 and 24.20 days, and the period of optimum availability (POA) of carbendazim ranged from 9.15 to 26.63 days. Also, ED₅₀ values of the developed formulations vary from 0.40 to 0.74 mg L^?1. These formulations can be used to optimize the release of carbendazim to achieve disease control for the desired period depending on the matrix of the polymer used.     

Distribution,Sources and Sinks of Atmospheric Halogenated Compounds

Based on two comprehensive field studies conducted in California, background concentration (parts per trillion) of N₂O (296.0 X 10³), SF₆ (0.16), CCI₂F₂ (180.8), CCI₃F (103.8), CCI₂FCCIF₂ (16.3), CCI₄ (114.2), CH₃CI (952.9), CHCI3 (23.4), CH₃I (2.4), CH3CCI3 (84.0), CCI₂CCI₂ (43.1), CHCICCI2 (14.5) and CH₃Br (—) have been reported. These trace constituents were identified using retention data on eight GC columns, their electron attachment properties, and their EC thermal response. All but CHCICCI₂ and CH₃Br were measurable 100% of the time at both sites. Cryogenic procedures for SF₆ ambient measurement were developed and successfully used. By an analysis of worldwide emissions of these trace constituents, their ambient levels, and their atmospheric lifetimes, it was possible to determine their origin (natural or anthropogenic). Our results indicate that 27% of organic chlorine contribution to the troposphere comes from fluorocarbons as opposed to a 73% contribution from the chloro-carbons. Further, the anthropogenic organic content in the troposphere was found to be about twice the natural content. Very high CHCI3 concentrations in onshore ocean waters were measured. Ambient data supporting the anthropogenic origin of CCI₄ have been presented.     

Objective Evaluation of Emergency Plans for Oxidant Control

Emergency plans for oxidant controls provide the basis for taking preventive action to protect public health. Historic oxidant data (1970 to Sept. 1974) from the South Coast Air Basin (SCAB), were evaluated to assess episode characteristics in an area where emergency strategies are most likely to be enforced. These findings, together with an objective study of a test case episode (June 1974) using a photochemical air quality simulation model, suggest that the currently conceived emergency plans for oxidant control are unlikely to be effective. It is concluded that, because of the chemical and mefeorofogfcal complexities of the episodes, they are extremely difficult both to predict and concurrently to control over their short-lived duration.     

Effect of combustion variables on PAHs emission from incineration of cellulose waste filters from acrylic industry

Incineration of cellulose waste filter from acrylic industry showed the presence of 13–16 polycyclic aromatic hydrocarbons (PAHs) from the list of 16 priority pollutants with an airflow rate of 1, 2, 3, and 4 L min^???1 in laboratory scale quartz tube vertical incinerator at 700–1,000°C at an interval of 100°C. The amount of total 16 PAHs increases with the increase in temperature with airflow rate of 1 L min^???1 and was found to be 9.4 times at 1,000°C than at 700°C. Studies at 800–1,000°C showed the decrease in total 16 PAHs with increase in airflow rate from 1 to 2 L min^???1. The amount of total 16 PAHs increases at 700, 800, and 1,000°C with increase in airflow rate from 2–4 L min^???1. At 900°C, amount of 16 PAHs decreases with increase in flow rate from 1 to 3 and increases at 4 L min^???1. The lesser amount of 2A PAHs was found at 700–900°C with airflow rates of 1–3 L min^???1, while less amount of 2B PAHs was found at 700°C and 800°C (with airflow rate of 1–2 L min^???1), at 900°C (with airflow rate of 1–3 L min^???1) and at 1,000°C (with airflow rate of 3 L min^???1). However, the sum total of 2A and 2B PAHs were found to be less at 700–900°C with airflow rate of 1–2 L min^???1.     

Seasonal air quality profile of inorganic ionic composition of PM10 near Taj Mahal in Agra, India

Atmospheric aerosols and their impacts on the environment particularly on human health is an issue of significant public and governmental concern. Though studies on air quality related to total suspended particulate matter have done by various authors in India, yet respirable suspended particulate matter (PM₁₀) is not characterized so far particularly in a historical and world heritage city like Agra. This study presents seasonal variation in mass levels of PM₁₀ and its ionic composition. PM₁₀ samples were collected in the proximity of Taj Mahal and subjected to chemical analysis using ion chromatography technique. The preliminary findings reveal that the 24-h average of PM₁₀ mass level varies from 115 to 233, 155 to 321, and 33 to 178 μg/m³, respectively, in summer, winter, and rainy seasons indicating critical pollution situation. These values are very much higher than the National Ambient Air Quality Standards of 75 μg/m³ (prescribed by Central Pollution Control Board, India) in both of summer and winter seasons whereas quite near the permissible limits in rainy season. The equivalent ratios of NH₄ ⁺ to nonsea salt SO₄ ^2? and NO₃ ^? and ∑Cations to ∑Anios were found to be greater than unity indicating high source strength of ammonia and alkaline nature of aerosols. The study suggests the need for continuous and long-term systematical sampling and detailed physiochemical analysis of PM₁₀ and also to know the characteristics of PM in background areas for better understanding of the emission sources.     

Life cycle assessment of natural gas combined cycle power plant with post-combustion carbon capture,transport and storage

Hybrid life cycle assessment has been used to assess the environmental impacts of natural gas combined cycle (NGCC) electricity generation with carbon dioxide capture and storage (CCS). The CCS chain modeled in this study consists of carbon dioxide (CO₂) capture from flue gas using monoethanolamine (MEA), pipeline transport and storage in a saline aquifer.Results show that the sequestration of 90% CO₂ from the flue gas results in avoiding 70% of CO₂ emissions to the atmosphere per kWh and reduces global warming potential (GWP) by 64%. Calculation of other environmental impacts shows the trade-offs: an increase of 43% in acidification, 35% in eutrophication, and 120–170% in various toxicity impacts. Given the assumptions employed in this analysis, emissions of MEA and formaldehyde during capture process and generation of reclaimer wastes contributes to various toxicity potentials and cause many-fold increase in the on-site direct freshwater ecotoxicity and terrestrial ecotoxicity impacts. NO_x from fuel combustion is still the dominant contributor to most direct impacts, other than toxicity potentials and GWP. It is found that the direct emission of MEA contribute little to human toxicity (HT < 1%), however it makes 16% of terrestrial ecotoxicity impact. Hazardous reclaimer waste causes significant freshwater and marine ecotoxicity impacts. Most increases in impact are due to increased fuel requirements or increased investments and operating inputs.The reductions in GWP range from 58% to 68% for the worst-case to best-case CCS system. Acidification, eutrophication and toxicity potentials show an even large range of variation in the sensitivity analysis. Decreases in energy use and solvent degradation will significantly reduce the impact in all categories.