Effect of varying two key parameters in simulating evacuation for subway stations in China

With the rapid development in economics, subway systems have been constructed in many big cities of China. Computer evacuation models developed overseas are commonly applied in working out safety management scheme. However, input evacuation parameters are not compiled from surveying passenger behavior in China. In fact, very few studies were conducted on justifying such parameters. Staircases in subway stations, particularly those connecting the platform and the ticket hall, are identified as the ‘bottleneck’ during evacuation in the subway stations. The maximum upstairs speed and the average minimum width of staircase utilized per person are the two key parameters affecting the evacuation through the staircase. Effect of varying these two parameters will be studied in this paper by taking two subway stations in China as examples. Evacuation performance is predicted with the software buildingEXODUS. The default values in the software are used and adjusted through field survey. Effect of varying either or both of the two parameters is discussed. The possible causes on the differences and the factors to affect such effect are explored. It is found that changing both parameters simultaneously would reduce the overall evacuation time by 50%. The effect of varying the two parameters on the overall evacuation performance of the whole station depends also on the occupancy density in the station; and the travel distance from the outlet of the staircase between the platform and the ticket hall to the inlet of the staircase between the ticket hall and the ground surface.     

Uncertainty aspects in process safety analysis

Uncertainties of input data as well as of simulation models used in process safety analysis (PSA) are key issues in the application of risk analysis results. Mostly, it is connected with an incomplete and uncertain identification of representative accident scenario (RAS) and other vague and ambiguous information required for the assessment of particular elements of risk, especially for determination of frequency as well as severity of the consequences of RAS. The authors discuss and present the sources and types of uncertainties encountered in PSA and also methods to deal with them. There are different approaches to improve such analysis including sensitivity analysis, expert method, statistics and fuzzy logic. Statistical approach uses probability distribution of the input data and fuzzy logic approach uses fuzzy sets. This paper undertakes the fuzzy approach and presents a proposal for fuzzy risk assessment. It consists of a combination of traditional part, where methods within the process hazard analysis (PHA) are used, and “fuzzy part”, applied quantitatively, where fuzzy logic system (FLS) is involved. It concerns frequency, severity of the consequences of RAS and risk evaluation. In addition, a new element called risk correction index (RCI) is introduced to take into account uncertainty concerned with the identification of RAS. The preliminary tests confirmed that the final results on risk index are more precisely and realistically determined.     

Improving construction site safety through leader-based verbal safety communication

Background

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. Method: A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n = 1,693 interviews), construction site safety level (correct vs. incorrect, n = 22,077 single observations), and safety climate (seven dimensions, n = 105 questionnaires) are measured over a period of up to 42 weeks. Results: Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures. Conclusions: Coaching construction site foremen to include safety in their daily verbal exchanges with workers has a significantly positive and lasting effect on the level of safety, which is a proximal estimate for work-related accidents. It is recommended that future studies include coaching and feedback at all organizational levels and for all involved parties in the construction process. Building client regulations could assign the task of coaching to the client appointed safety coordinators or a manager/supervisor, and studies should measure longitudinal effects of coaching by following foremen and their work gangs from site to site.     

Anhydrous ethanol production by extractive distillation: A solvent case study

Production of anhydrous ethanol in large scale has been made by extractive distillation using conventional solvents like ethylene-glycol. In the present paper, extractive distillation process is studied to obtain pure ethanol using ethylene-glycol and tetraethylene-glycol as solvents. Residue curve maps are used to analyse the proposed distillation processes in interpreting mixture behaviours and feasibility of distillation columns. The industrial process is simulated at steady state from residue curve map analysis. Simulation results for the ethanol/water mixture using ethylene-glycol, the conventional solvent, and tetraethylene-glycol, an alternative solvent, are presented. These results showed that the process using tetraethylene-glycol is reliable, although it requires more energy than the process with ethylene-glycol. However, ethylene-glycol has a considerable toxicity level while tetraethylene-glycol is non-toxic.     

Oxidation of kerosene components in a soil matrix by a dielectric barrier discharge reactor

This paper discusses some aspects of the kerosene components oxidation in a soil matrix by a dielectric barrier discharge reactor at atmospheric pressure. The total kerosene components abatement can reaches 90% for an energy density of 960 J g_soil^?1. The analyses of the discharge cell outlet gas reveals that CO_x and hydrocarbon compounds selectivity is close to 10%. A semi-quantitative approach by GC-FID shows that the carbon content in the oxidized compounds in soil is about 20% of the carbon content in the initial kerosene components. The polar species formed in soil are a mixture of aliphatic and aromatic molecules containing alcohol and carboxylic acid groups. The process of kerosene oxidation in soil matrix is more promoted than kerosene desorption followed by an oxidation in gas phase.     

Regulation of hepatocyte proliferation

After partial hepatectomy the low proliferation rate of hepatocytes increases dramatically. This is based on a feed-back system whose central link is a liver cell proliferation hormon, the so-called hepatopoietin. The hormon originates from the Peyer's patches: after their resection, the liver cell proliferation after partial hepatectomy decreases by about 80%. Hepatopoietin effects organ specific but species nonspecific.