Spatial distribution patterns of the soft corals Alcyonium acaule and Alcyonium palmatum in coastal bottoms (Cap de Creus, northwestern Mediterranean Sea)

Current knowledge on the abundance and distribution patterns of different soft coral species is relatively limited when compared to other benthic suspension feeders such as gorgonians and hard coral species. To overcome this scarcity of information, the distribution patterns of the soft corals Alcyonium acaule and Alcyonium palmatum were investigated in northwestern Mediterranean benthic communities over a wide geographical (60 km of coastline) and bathymetrical (0–70 m depth) extent using a remotely operated vehicle. A. acaule was the most abundant species in the study area with highest recorded density of 18 col m^?2 found at depths of 35–45 m in areas that are directly exposed to strong near-bottom currents. Conversely, A. palmatum was only found as scattered solitary colonies at greater depths in soft bottoms, with maximum density of 2.4 col m^?2. Medium and large colonies of A. acaule were preferentially found on sloping and vertical rocky bottoms where they form dense patches. High-density patches of A. acaule were preferentially found on vertical rocky bottom, while isolated colonies were preferentially observed on coralligenous substrata as well as on flat soft and maërl substrates. A. acaule biomass distribution showed highest values between 40 and 45 m depth, and between 60 and 65 m depth. This suggests that deeper populations are formed by colonies that are bigger than the equivalent shallower ones. Although both species are almost genetically identical, ecologically they are very different. For this reason, conservation plans should consider the differential ecological traits shown by these two soft coral species.     

Amelioration of free copper by hydrothermal vent microbes as a response to high copper concentrations

We examined the effect of increased copper concentrations (0–10 μM) on hydrothermal vent micro- organisms and the production of copper (Cu)-binding ligands as a response. Hydrothermal vent microbes originated from diffuse fluids at the Lilliput mussel field and the Irina II site in the Logatchev hydrothermal vent field, both on the Mid-Atlantic Ridge. Parallel studies were also conducted with amino acids supplemented to the incubations in order to verify whether dissolved amino acids, present in hydrothermal fluids, can buffer the bioavailable copper and reduce the active production of Cu-binding ligands. In all incubations, ligand concentrations increased with rising copper concentrations, but microbial cell numbers remained constant. This study shows that microbes were able to cope with as much as 10 μM dissolved copper by buffering the free copper concentration. The presence of amino acids had no significant influence on the active ligand production. Our results imply that mediation of chemical speciation by vent microbes may have an important impact on hydrothermal trace metal fluxes into the ocean.     

Stoffströme von Benzol unter besonderer Berücksichtung der Bundesrepublik Deutschland

In the Federal Republic of Germany, benzene is one of the most important basic materials for the chemical industry. Only a relatively small proportion of the pure benzene processed in the chemical industry is emitted into the environment (ca. 40t in 1991). But the substance is also a natural component of the crude oil in gasoline and is released during incomplete combustion or is formed out of other aromatic substances. The primary source of emissions, with more than 10,000 t/yr (approximately 85% of this from motor vehicles with Otto engines), is commercial motor vehicle transportation. Benzene concentrations in the environment are approximately <1 μg/m³ in rural areas, 20–30 μg/m³ near main roads (peak levels in highly urbanized regions with much traffic as high as approximately 100 μg/m³) and 7–15 μg/m³ in the vicinity of industrial polluters. It has not been possible to detect a specific trend over time during the last ten years. An increased exposure (approx. 350–27,000 μg/m³) is likely while filling the tank and within the motor vehicle (approx. 10–200 μg/m³) due to gasoline volatilization from pipes, etc. Compared to outdoor air, higher concentrations of benzene (approx, 2–11 μg/m³) are measured in the indoor air which contains additionally benzene from tobacco smoke, equipment, renovating work and heating. The primary exposure pathway of benzene in humans is inhalation. Apart from individuals with occupational exposure, smokers have the highest internal benzene burden. Measures undertaken during recent years to reduce the amount of emissions have been counteracted at least in part by the increase in motor vehicle traffic. Further measures to reduce the emissions or to change the transporttation policies must still be or have already been initiated.     

The influence of solid matrices on arsenic toxicity to Corophium orientale

In marine ecosystems, benthic organisms are really important because they are the first step in the transfer of contaminants from environment to biota. To this end, this study focused on biological assays with the amphipod Corophium orientale exposed to two different molecules of arsenic: arsenate (As^V), the most abundant form in sediments, and dimethyl-arsinate (DMA), expected to be moderately toxic as an intermediate in the process of detoxification. The toxicity of arsenic compounds was measured after exposure to three different matrices: water, spiked natural sediment and inert spiked quartz sand. LC₅₀ values were calculated for each exposure, and the results confirmed the highest toxicity of As^V, in addition to underlining the importance of matrix of exposure. Water exposure was the matrix which presented the highest toxicity for inorganic arsenic (As^V LC₅₀=3.51 mg L^?1 vs DMA LC₅₀=54.65 mg L^?1), spiked natural sediment demonstrated its capability to chelate arsenate toxicity (As^V LC₅₀=34.27 mg kg^?1 vs. DMA LC₅₀=52.19 mg kg^?1) and spiked quartz sand presented intermediate values for As^V (LC₅₀=25.26 mg kg^?1), whereas for DMA a lower toxicity was registered (LC₅₀=872.35 mg kg^?1). This study can provide some useful data linked with chemical speciation of arsenic and exposure matrix, for improving the correct management of contaminated sediment.     

Urinary methyl tert-butyl ether and benzene as biomarkers of exposure to urban traffic

Methyl tert-butyl ether (MTBE) and benzene are added to gasoline to improve the combustion process and are found in the urban environment as a consequence of vehicular traffic. Herein we evaluate urinary MTBE (MTBE-U) and benzene (BEN-U) as biomarkers of exposure to urban traffic. Milan urban policemen (130 total) were investigated in May, July, October, and December for a total of 171 work shifts. Personal exposure to airborne benzene and carbon monoxide (CO), and atmospheric data, were measured during the work shift, while personal characteristics were collected by a questionnaire. A time/activity diary was completed by each subject during the work shift. Spot urine samples were obtained for the determination of MTBE-U and BEN-U. Median personal exposure to CO and airborne benzene were 3.3 mg/m(3) and 9.6 μg/m(3), respectively; median urinary levels in end-of-shift (ES) samples were 147 ng/L (MTBE-U) and 207 ng/L (BEN-U). The time spent on traffic duty at crossing was about 40% of work time. Multiple linear regression models, taking into account within-subject correlations, were applied to investigate the role of urban pollution, atmospheric conditions, job variables and personal characteristics on the level of biomarkers. MTBE-U was influenced by the month of sampling and positively correlated to the time spent in traffic guarding, CO exposure and atmospheric pressure, while negatively correlated to wind speed (R(2) for total model 0.63, P<0.001). BEN-U was influenced by the month and smoking habit, and positively correlated to urinary creatinine; moreover, an interaction between CO and smoking was found (R(2)=0.62, P<0.001). These results suggest that MTBE-U is a reliable marker for assessing urban traffic exposure, while BEN-U is determined mainly by personal characteristics.     

Estimating the magnitude of morphoscapes: how to measure the morphological component of biodiversity in relation to habitats using geometric morphometrics

Ecological indicators are currently developed to account for the different facets of loss of biological diversity due to direct or indirect effects of human activities. Most ecological indicators include species richness as a metric. Others, such as functional traits and phylogenetic diversity, account for differences in species, even when species richness is the same. Here, we describe and apply a different indicator, called morphoscape dimension, accounting for morphological variability across habitats in a geographical region. We use the case of ground beetles (Coleoptera: Carabidae) in four different habitats in the Po Plain in Northern Italy to exemplify how to quantify the magnitude of the morphological space (i.e. the dimension of the morphoscape) occupied by the species in each habitat using geometric morphometrics. To this aim, we employed a variety of metrics of morphological disparity related to univariate size, and more complex multivariate shape and form. Our ‘proof of concept’ suggests that metrics assessing size and form might largely tend to simply mirror the information provided by species richness, whereas shape morphoscape disparity may be able to account for non-trivial differences in species traits amongst habitats. This is indicated by the woodland morphoscape being on average bigger than that of crops, the most species-rich habitat, despite having almost 20% less species. We conclude suggesting that the analysis of morphoscape dimension has the potential to become a new additional and complimentary tool in the hands of conservation biologists and ecologists to explore and quantify habitat complexity and inform decisions on management and conservation based on a wide set of ecological indicators.     

Analysis of the spatio-temporal and semantic aspects of land-cover/use change dynamics 1991–2001 in Albania at national and district levels

In the turmoil of a rapidly changing economy the Albanian government needs accurate and timely information for management of their natural resources and formulation of land-use policies. The transformation of the forestry sector has required major changes in the legal, regulatory and management framework. The World Bank financed Albanian National Forest Inventory project provides an analysis of spatially explicit land-cover/use change dynamics in the period 1991–2001 using the FAO/UNEP Land Cover Classification System for codification of classes, satellite remote sensing and field survey for data collection and elements of the object-oriented geo-database approach to handle changes as an evolution of land-cover/use objects, i.e. polygons, over time to facilitate change dynamics analysis.Analysis results at national level show the trend of natural resources depletion in the form of modifications and conversions that lead to a gradual shift from land-cover/use types with a tree cover to less dense tree covers or even a complete removal of trees. Policy failure (e.g., corruption, lack of law enforcement) is seen as the underlying cause. Another major trend is urbanisation of areas near large urban centres that change urban-rural linkages. Furthermore, after privatisation agricultural areas increased in the hills where environmental effects may be detrimental, while prime agricultural land in the plains is lost to urbanisation.At district level, the local variability of spatially explicit land-cover/use changes shows different types of natural resources depletion. The distribution of changes indicates a regional prevalence, thus a decentralised approach to the natural resources management could be advocated.     

Fate and degradation of triasulfuron in soil and water under laboratory conditions

The behavior and fate of triasulfuron (TRS) in water and soil systems were examined in laboratory studies. The degradation of TRS in both buffer solution and soil was highly pH-sensitive. The rate of degradation could be described with a pseudo first-order kinetic and was much faster at pH 4 than at pH 7 and 9. Aqueous hydrolysis occurred by cleavage of the sulfonylurea bridge to form 2-(2-chloroethoxy) benzenesulfonamide (CBSA) and [(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino] (AMMT). AMMT was unstable in aqueous solutions in any pH condition but it degraded more quickly at pH 4 and 9. CBSA did not degrade in aqueous solutions or in enriched cultures but it underwent a quick degradation in the soil. The rates of TRS degradation in sterile and non-sterile soils were similar, suggesting that microorganisms played a minimal role in the breakdown process. This hypothesis is supported by the results of studies on the degradation of TRS by enriched cultures during which the molecule underwent a prevalently chemical degradation.     

Management challenges of urban biosolids: narratives around facility siting in rural Ontario

The emerging challenge of managing increasing volumes of urban sewage has resulted in municipalities pursuing sustainable ways to manage urban biosolids and their by-products. Using content analysis of public debates, and situating the debate within science, policy and facility siting literature, this study examines claims and counterclaims relating to the siting of a biosolid processing facility in rural Ontario. The equivocal evidence on the health and environmental effects of biosolids resulted in a heated “expert versus lay” debate. The study critically evaluates the importance of trust and the shifting role of scientific evidence in politicised settings, while making relevant policy recommendations.