排序方式: 共有45条查询结果,搜索用时 15 毫秒
1.
V. Sivakumar V. Ravi Verma P.G. Rao G. Swaminathan 《Journal of Cleaner Production》2007,15(18):1813-1818
Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages. 相似文献
2.
Charudutt Mishra Gustaf Samelius Munib Khanyari Prashanth Nuggehalli Srinivas Matthew Low Carol Esson Suri Venkatachalam
rjan Johansson 《Ambio》2022,51(3):494
The cold and arid mountains and plateaus of High Asia, inhabited by a relatively sparse human population, a high density of livestock, and wildlife such as the iconic snow leopard Panthera uncia, are usually considered low risk for disease outbreaks. However, based on current knowledge about drivers of disease emergence, we show that High Asia is rapidly developing conditions that favor increased emergence of infectious diseases and zoonoses. This is because of the existing prevalence of potentially serious pathogens in the system; intensifying environmental degradation; rapid changes in local ecological, socio-ecological, and socio-economic factors; and global risk intensifiers such as climate change and globalization. To better understand and manage the risks posed by diseases to humans, livestock, and wildlife, there is an urgent need for establishing a disease surveillance system and improving human and animal health care. Public health must be integrated with conservation programs, more ecologically sustainable development efforts and long-term disease surveillance.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01599-7. 相似文献
3.
Long-term consumption of water containing excessive fluoride can lead to fluorosis of the teeth and bones. Electrocoagulation (EC) is an electrochemical technique, in which a variety of unwanted dissolved particles and suspended matter can be effectively removed from an aqueous solution by electrolysis. Continuous flow experiments with monopolar aluminium electrodes for fluoride removal were undertaken to investigate the effects of the different parameters such as: current density (12.5-50A/m(2)), flow rate (150-400 mL/min), initial pH (4-8), and initial fluoride concentration (5-25mg/L). The highest treatment efficiency was obtained for the largest current and the removal efficiency was found to be dependent on the current density, the flow rate and the initial fluoride concentration when the final pH ranged between 6 and 8. The composition of the sludge produced was analysed using the X-ray diffraction (XRD) spectrum. The strong presence of the aluminium hydroxide [Al(OH)(3)] in the above pH range, which maximizes the formation of aluminium fluoride hydroxide complex [Al(n)F(m)(OH)(3n-m)], is the main reason for defluoridation by electrocoagulation. The results obtained showed that the continuous flow electrocoagulation technology is an effective process for defluoridation of potable water supplies and could also be utilized for the defluoridation of industrial wastewater. 相似文献
4.
G.L. Sivakumar Babu Krishna R. Reddy Sandeep K. Chouksey 《Waste management (New York, N.Y.)》2010,30(1):11-22
A constitutive model is proposed to describe the stress–strain behavior of municipal solid waste (MSW) under loading using the critical state soil mechanics framework. The modified cam clay model is extended to incorporate the effects of mechanical creep and time dependent biodegradation to calculate total compression under loading. Model parameters are evaluated based on one-dimensional compression and triaxial consolidated undrained test series conducted on three types of MSW: (a) fresh MSW obtained from working phase of a landfill, (b) landfilled waste retrieved from a landfill after 1.5 years of degradation, and (c) synthetic MSW with controlled composition. The model captures the stress–strain and pore water pressure response of these three types of MSW adequately. The model is useful for assessing the deformation and stability of landfills and any post-closure development structures located on landfills. 相似文献
5.
Maloy Kumar Sahu K Sivakumar T Thangaradjou L Kannan 《Journal of environmental biology / Academy of Environmental Biology, India》2007,28(4):795-798
Sediment samples were collected from different stations of the Vellar estuary for isolation of total actinomycetes and phosphate solubilizing actinomycetes. Phosphatase activity in the sediments was also investigated Consistently a higher number of actinomycetes, phosphate solubilizing actinomycetes and phosphatase activity were recorded from the clay sediments than the sandy sediments at all the stations. In all, 7 strains showed positive phosphatase activity. Among them, one strain PS-3 exhibited good activity and was further investigated for optimum phosphorus solubilization at different pH (6, 6.5, 7, 7.5 and 8) and incubation (1st day to 20th day) periods. The solubilizing activity was maximum at the pH 7 and an incubation period of 13 days was required for an appreciable quantity of phosphorus to be leached into the medium. Based on the chemotaxonomical and conventional methods of identification, the strain PS-3 has been tentatively identified as Streptomyces galbus. The present study indicates that phosphatase enzyme and S. galbus along with other actinomycetes species would play a major role in solubilizing the phosphate in the estuarine ecosystem and increasing the soluble phosphate concentration thereby enhancing the productivity 相似文献
6.
Zeolites HY, Hbeta and HZSM-5 with different physico-chemical properties were chosen as support for TiO2 to illustrate their adsorption, dispersion and electronic structure in photocatalysis. The extent of TiO2 loading was monitored by XRD and BET surface area measurements. The adsorption capacity of HY zeolite was found to be high and hence chosen for further modification to continue the investigation. Photodegradation kinetics were carried out with 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution. The extent of 2,4-D degradation on TiO2/HY loading revealed the importance of adsorption in photocatalysis. Mineralisation studies on all three zeolites with 1 wt.% TiO2 loading demonstrated the good dispersion properties of TiO2/HY. Its photocatalytic activity was found to be excellent with formulated 2,4-D. Comparison of relative photonic efficiencies demonstrated that supported photocatalysts exhibited higher activity than some of the commercial photocatalysts. The high activity of supported TiO2 is due to synergistic effects of improved adsorption of 2,4-D and efficient delocalisation of photogenerated electrons by zeolite support. 相似文献
7.
Sahu MK Poorani E Sivakumar K Thangaradjou T Kannan L 《Journal of environmental biology / Academy of Environmental Biology, India》2007,28(3):645-650
The actinomycete strain LA-29 isolated from the gut contents of the fish, Mugil cephalus of the Vellar estuary showed excellent L-asparaginase activity The enzyme was purified 18-fold and the final recovery of protein was 1.9%, which exhibited an activity of 13.57 IU/mg protein. The partially purified L-asparaginase inhibited the growth of leukemia cells in male wistar rats. Average survival period of the rats was more in an optimum enzyme dose of 100 units and the survival period was less when the dosages were increased and at the same time the enzyme became less effective when the dosages were decreased. Higher survival of 17.2 days was recorded when 100 units of the enzyme was given in three intermittent doses (50/25/25 units) at the interval of 24 hr. Analysis of cell components of the strain LA-29 has revealed the wall type-I which is the characteristic of the genus Streptomyces. Further the morphological, physiological and biochemical features along with the micromorphological results obtained for the strain LA-29 were compared with that of the Streptomyces species found in Bergey's Manual of Determinative Bacteriology and the strain LA-29 has been tentatively identified as Streptomyces canus. 相似文献
8.
D. Sivakumar L. F. Ng S. M. Lau K. T. Lim 《Journal of Polymers and the Environment》2018,26(2):499-507
Investigation on the fatigue life of hybrid composites is critical to extend their applications and acceptance among industries; however, there is a lack of research focus on fatigue performance of the hybrid composite. In this study, the fatigue life of glass/kenaf woven-ply hybrid composite with thermoplastic and thermoset polymer matrix was investigated. Hybrid composites consist of two different fibre configurations: kenaf/glass/kenaf and glass/kenaf/glass. Thermoplastic hybrid composites were manufactured through the hot press moulding compression method, while thermoset hybrid composites were fabricated through the vacuum-assisted resin infusion method. The tensile strength and fatigue strengths of the kenaf/glass/kenaf composite have been identified to be significantly lower than those of the glass/kenaf/glass composite regardless of the types of matrix used. However, thermoplastic-based kenaf/glass/kenaf composites are less fatigue sensitive compared to glass/kenaf/glass composites; however, this phenomenon is vice versa for thermoset composites due to the epoxy matrix, which limits the stiffening effect in natural fibres. 相似文献
9.
Textile effluents are characterized by high chemical oxygen demand, biological oxygen demand, total dissolved solids, pH and colour. Fabric preparation steps, such as desizing, scouring, bleaching and mercerizing, use various chemicals and plenty of water. The occurrence of unfixed dyes and other electrolytes in effluents poses serious threats to the environment. Available end-of-pipe treatment procedures are either expensive or not efficient; hence, a large number of small-scale industries succumb to this problem. So, finding an alternative eco-friendly process of textile production is of paramount interest. Here, we review three potential eco-friendly systems applicable to textile dyeing processes to minimize salt and water consumption. First, we review application of enzymatic processing in fabric preparation. Secondly, we review the use of biodegradable organic salts, such as trisodium citrate, magnesium acetate, tetrasodium edate and sodium salts of polycarboxylic acids, as fixation and exhaustion agents. Finally, we review various surface modifications of cotton to reduce the volume of effluent and total dissolved solids. 相似文献
10.
Bellie Sivakumar Shie-Yui Liong Chih-Young Liaw 《Journal of the American Water Resources Association》1998,34(2):301-310
ABSTRACT: This paper focuses on the investigation of the existence of chaotic behavior in the Singapore rainfall data. The procedure for the determination of the minimum number of variables essential and the number of variables sufficient to model the dynamics of the rainfall process was studied. An analysis of the rainfall behavior of different time periods was also conducted. The correlation dimension was used as a basis for discriminating stochastic and chaotic behaviors. Daily rainfall records for durations of 30, 20, 10, 5, 4, 3, 2, and 1 years from six stations were analyzed. The delay time for the phase-space reconstruction was computed using the autocorrelation function approach. The results provide positive evidence of the existence of chaotic behavior in the daily rainfall data. The minimum number of variables essential to model the dynamics of the rainfall process was identified to be 3 while the number of variables sufficient to model the dynamics of the rainfall process ranges from 11 to 18. The results also suggest that the attractor dimensions of rainfall data of longer time periods are higher than that of shorter time periods. The study suggests a minimum number of 1500 data points required for the computation of the correlation dimension of the rainfall data. 相似文献