Sulfur, chromium, and selenium accumulated in Chinese cabbage under direct covers

Currently, pollution of our agricultural soils and waters is increasing and is often associated with many human health ailments. Soils contaminated with low levels of heavy metals and other trace elements are frequently used for growing vegetable crops and in such a situation, these toxic contaminants often accumulate in the edible portions of these agricultural plants and thereby enter the human food chain. In 3 consecutive years of field experiments (1994-1996), two different crop-covering treatments--T (50 microm perforated polyethylene), and T2 (17 gm(-2) non-woven polypropylene)--were used to modify the environmental conditions for the growth of Chinese cabbage 'Nagaoka 50' [Brassica rapa L. (Pekinensis group)]. Open-air plots (T(0)) were used as controls. Analytical determinations of chromium (Cr), selenium (Se), two forms of sulfur (total-S and sulfate-S), and amino acids (Isoleucine, leucine, lysine, methionine, serine, threonine, and valine) were performed utilizing plant shoots for analysis. The T1 and T2 treated plants contained concentrations of lysine, methionine, serine, and threonine higher than in T(0). Under T1, the extent of Cr and Se removal in the field was more favorable. Direct covers could be used in contaminated agricultural zones for a variety of plant species, not just for use with those plants previously reported to be efficient at bio-accumulating toxic elements because the thermal effect created by the covers favors phytoextraction processes. However, it is clear that the accumulation of these toxic substances in the plants (Cr) would deem the plant material unsuitable for human consumption and use as animal fodder.     

Chemical and biological characterization of emissions from small residential stoves burning wood and charcoal

Emissions from a small residential wood stove and a newly developed residential stove burning charcoal have been characterized by chemical analysis and mutagenicity testing (Ames Salmonella test). For wood burning the samples were taken under normal and starved air conditions burning birch and spruce separately. The burning conditions in the stove seemed to influence the emissions to a larger extent than the type of wood.The emissions of aldehydes, benzene and polycyclic aromatic hydrocarbons from the charcoal-burning stove are lower by a factor of 25–1000 as compared to the wood stove. The mutagenicity of the emissions showed a similar trend.     

Nitrate exported in drainage waters of two sprinkler-irrigated watersheds

Nitrate contamination of surface waters has been linked to irrigated agriculture across the world. We determined the NO3-N loads in the drainage waters of two sprinkler-irrigated watersheds located in the Ebro River basin (Spain) and their relationship to irrigation and N management. Crop water requirements, irrigation, N fertilization, and the volume and NO3-N concentration of drainage waters were measured or estimated during two-year (Watershed A; 494 irrigated ha) and one-year (Watershed B; 470 irrigated ha) study periods. Maize (Zea mays L.) and alfalfa (Medicago sativa L.) were grown in 40 to 60% and 15 to 33% of the irrigated areas, respectively. The seasonal irrigation performance index (IPI) ranged from 92 to 100%, indicating high-quality management of irrigation. However, the IPI varied among fields and overirrigation occurred in 17 to 44% of the area. Soil and maize stalk nitrate contents measured at harvest indicated that N fertilizer rates could be decreased. Drainage flows were 68 mm yr(-1) in Watershed A and 194 mm yr(-1) in Watershed B. Drainage NO3-N concentrations were independent of drainage flows and similar in the irrigated and nonirrigated periods (average: 23-29 mg L(-1)). Drainage flows determined the exported mass of NO3-N, which varied from 18 (Watershed A) to 49 (Watershed B) kg ha(-1) yr(-1), representing 8 (Watershed A) and 22% (Watershed B) of the applied fertilizer plus manure N. High-quality irrigation management coupled to the split application of N through the sprinkler systems allowed a reasonable compromise between profitability and reduced N pollution in irrigation return flows.     

Environmental regulation of trades by fixed standards: The Danish experience

Summary In 1986, the Danish Environmental Protection Agency established a new regulatory system aimed at small-scale polluting activities. Contrary to the dominant regulatory system based on individual standards for each polluting activity, the new regulatory system established uniform and fixed environmental standards for all activities within a trade. The fixed standards concern location, design and daily operation. Thus far, the new regulatory system has been implemented in the trades of fur farms and auto-repair shops.This study shows that fixed environmental standards reduce the total administrative costs, intensify local monitoring and enforcement of the standards, and improve the environmental state. It is proposed that the following criteria should be considered if the regulatory system is to be implemented in other trades. The trade should consist of many units and be characterised by a moderate pace of technological development, it should posses well-defined and well-known environmental problems, and have a cooperative trade association. In Denmark several trades have been identified as obvious objects for future regulation by fixed environmental standards.Bente Kjærgård is a Research Associate in the Department of Environment, Technology and Social Studies at Roskilde University. Correspondence should be addressed to this author. The other authors are Associate Professors in the same Department. Each author possesses a research degree as follows: Per Homann Jespersen in Chemical Engineering, Henning Schroll in Biology, Jesper Holm in Technological Planning, and Bente Kjærgård in Environmental Planning.     

Modelling and simulation of inhibition-injection systems applied to polymerization reactors

The most critical aspect of polymerization reactors is the agitator's stop and becomes more serious when this occurs exactly at the removal of the heat load, which is generated by the reaction (exothermic). This phenomenon is typical in power-failure situations of the energy supply or because of other related problems at the plant. The objective of this work is to compare the performance of two configurations for the inhibition-injection system for vinyl chloride monomer (VCM) polymerization reactors. To determine the injection time a rigorous mathematical model was developed. From the results of this work one of the configurations was implemented in an industrial plant.     

Characterising sources and sinks of rural VOC in eastern France

Fifty non-methane hydrocarbons (NMHC) and seventeen carbonyl compounds were measured at a French rural site from 1997 to 2001, as part of the EMEP programme. Data handling was based on an original source-receptor approach. First, the examination of the levels and trends was completed by the comparison of the seasonal distribution of rural and urban VOC/acetylene ambient ratios. This analysis has shown that most of the compounds derived from mixing and photochemical transformation of mid-range transported urban pollutants from the downwind urban area. Then, identified sources and sinks were temporally apportioned. Urban air masses mixing explains, at least, 80% of the wintertime levels of anthropogenic NMHC and isoprene. In summer, photochemistry dominates the day-to-day distribution of anthropogenic NMHC whilst summertime isoprene is also controlled by in-situ biogenic emissions. Then, the results of C(1)-C(3) carbonyls were discussed with respect to their direct biogenic and anthropogenic emissions and photochemical production through the [carbonyl/auto-exhaust tracers] emission ratio. Diluted vehicle exhaust emissions mainly contribute to the total content of lower aldehydes in winter while other processes control lower ketones. Secondary production is predominant in summer with at least a 50% high intensity. Its dependence upon temperature and radiation is also demonstrated. Finally, the importance of the primary and secondary biogenic production of acetone and formaldehyde is assessed. In particular, biogenic contribution would explain 37 +/- 25% of acetone levels in summer.     

In situ tracer tests to determine retention properties of a block scale fracture network in granitic rock at the Aspö Hard Rock Laboratory, Sweden

Experiments were conducted at the Asp? Hard Rock Laboratory in order to improve the understanding of radionuclide retention properties of fractured crystalline bedrock in the 10-100 m scale (TRUE Block Scale Project, jointly funded by ANDRA, ENRESA, Nirex, JNC, Posiva and SKB). A series of tracer experiments were performed using sorbing tracers in three different flow paths. The different flow paths had Euclidian lengths of 14, 17 and 33 m, respectively, and one to three water conducting structures. Four tests were performed using different cocktails made up of radioactive sorbing tracers (22,24Na+, 42K+, 47Ca2+, 85Sr2+, 83,86Rb+, 131,133Ba2+ and 134,137Cs+). For each tracer injection, the breakthrough of sorbing tracers was compared to the breakthrough of a conservative tracer, 82Br-, 131I-, HTO and 186ReO4-, respectively. In the two longer flow paths, no breakthrough of 83Rb+ and 137Cs+ was observed after 8 months of pumping. Selected tracer tests were subject to basic modelling in which a one-dimensional (1D) advection-dispersion model, including surface sorption, and an unlimited matrix diffusion were used for the interpretation of the results. The results of the modelling indicated that there is a slightly higher mass transfer into a highly porous material in the block-scale experiment compared with in situ experiments performed over shorter distances and significantly higher than what would have been expected from laboratory data obtained from studies of the interactions in nonaltered intact rock.     

Natural gamma radiation map (MARNA) and indoor radon levels in Spain

During the last decade, the Department of Applied and Medical Physics has been involved in the development of a radiation protection programme. In the framework of this programme, measurements of indoor radon, principally, have been carried out nationwide. Geometric mean radon concentrations of 45 Bq m(-3) in the whole country and 130 Bq m(-3) in the high natural radiation area have been estimated. On the other hand, the so-called MARNA Project is developed into the framework of an agreement subscribed between the Spanish Nuclear Safety Council (CSN) and the National Uranium (ENUSA), the first phase of which has been the elaboration of the Natural Gamma Radiation Map of Spain on the scale of 1:1,000,000 using radiometric data generated in the 30 years of the lifetime of the ancient National Uranium Exploration and Investigation Plan mainly through airborne, carborne, and by foot surveys, within the MARNA Project itself. The lowest averaged dose rate from external gamma radiation (19.3 nGyh(-1)) was found in carbonate bedrock and the highest (87.7 nGyh(-1)) was found in granite and clay bedrock. This paper summarizes the main results obtained from the measurements performed in both projects, with special interest in those concerning the correlation between the data reported in order to conclude about the potential benefit of the MARNA maps in the definition of affected areas in the country.     

Air Pollution Potential: Regional Study in Argentina

/ Air pollution potential is a measure of the atmospheric conditions that are unable to transport and dilute pollutants into the air, independently of the existence of sources. This potential can be determined from two atmospheric parameters: mixing height and transport wind. In this paper a statistical analysis of the mixing height and transport wind, in order to determine the areas with high or poor atmospheric ventilation in Argentina, is presented. In order to achieve this, meteorological data registered during 1979-1982 at eight meteorological stations were used. Daily values of the maximum mixing height were calculated from observations of daily temperatures at different heights and maximum surface temperature. At the same time as the maximum mixing height, the values of the transport wind were determined from the surface windspeed and the characteristics of the ground in the surroundings of each meteorological station. The mean seasonal values for both parameters were obtained. Isopleths of the mean seasonal of the maximum mixing heights were drawn. The percentage of seasonal frequencies of poor ventilation conditions were calculated and the frequency isopleths were also drawn to determine areas with minor and major relative frequencies. It was found that the northeastern and central-eastern regions of Argentina had a high air pollution potential during the whole year. Unfavorable atmospheric ventilation conditions were also found in the central-western side of the country during the cold seasons (37.5% in autumn and 56.9% in winter). The region with the greatest atmospheric ventilation is located south of 40 degrees S, where the frequency of poor ventilation varies between 8.0% in summer and 10.8% in winter.     

Methoxyphenols from burning of Scandinavian forest plant materials

Semivolatile compounds in smoke from gram-scale incomplete burning of plant materials were assessed by gas chromatography and mass spectrometry. Gas syringe sampling was shown to be adequate by comparison with adsorbent sampling. Methoxyphenols as well as 1,6-anhydroglucose were released in amounts as large as 10 mg kg(-1) of dry biomass at 90% combustion efficiency. Wood, twigs, bark and needles from the conifers Norway spruce and Scots pine emitted 12 reported 2-methoxyphenols in similar proportions. Grass, heather and birchwood released the same 2-methoxyphenols but also the corresponding 2,6-dimethoxyphenols which are characteristic of angiosperms. The methoxyphenols are formed from lignin and differ in structure by the group in para position relative to the phenolic OH group. Prominent phenols were those with trans-1-propenyl and ethenyl groups in that position. Vanillin, 4-hydroxy-3-methoxybenzaldehyde, was a prominent carbonyl compound from the conifer materials.