Determination of Motor Vehicle Profiles for Non-Methane Organic Compounds in the Mexico City Metropolitan Area

ABSTRACT

Non-methane organic compound (NMOC) profiles for on-road motor vehicle emissions were measured in a downtown tunnel and parking garages in Mexico City during 1996. Hydrocarbon samples from the tunnel and ambient air samples (C2-C12) were collected using stainless steel canisters, and carbonyl compounds were collected using 2,4-dinitrophenylhydrazine (DNPH) impregnated cartridges. Canister samples were analyzed by gas chromatog-raphy/flame ionization detection (GC/FID) to ascertain detailed hydrocarbon composition. DNPH samples were analyzed by high performance liquid chromatography (HPLC). NMOC source profiles were quantified for evaporative emissions from refueling, cold start, and hot soak, and on-road operating conditions. The ultimate purpose will be to determine the apportionment of ambient NMOC concentrations using the Chemical Mass Balance (CMB) model. The tunnel profile contained 42.3 ppbC% of alkanes, 20.6 ppbC% of unsaturated compounds, and 22.4 ppbC% of aromatics. The most abundant species were acetylene with 7.22 ppbC%, followed by ipentane with 5.69 ppbC%, and toluene with 5.42 ppbC%. These results were compared with those from studies in the United States. The cold start profile was found to be similar to the tunnel profile, although there were differences in the content of acetylene, isopentane, and oxygenates. The abundance of saturated NMOC in the hot soak profile was similar to gasoline head space profiles; it was also much larger than saturated NMOC in the roadway profile.     

A Device for Measuring Volatile Organic-Carbon Emissions from Cooling-Tower Water

A manual method for measuring reduced sulfur compounds in kraft pulp mill and sulfur recovery plant emissions was evaluated. The method involves removing SO₂ from the gas stream (if present) with a citric acid-potassium citrate buffer that passes reduced sulfur compounds; thermal oxidation of all reduced sulfur compounds to SO₂; collection of the SO₂ in H₂O₂; and a titrimetric analysis of the H₂O₂ for SO₄ ^2?. A heated filter removes alkaline particulate matter that would produce a negative interference if absorbed by the buffer. When used at kraft pulp mills, the method agrees closely with Reference Method 16, provided that nonregulated reduced sulfur compounds, such as carbonyl sulfide, are not present in the emissions. At sulfur recovery plants, nonregulated reduced sulfur compounds, such as thiophene, are likely to be present in the emissions and will produce a positive bias in the results obtained with this method. The precision of the method ranges from 1 to 7 percent relative standard deviation.     

Occurrence of persistent organic pollutants in sediments and biota from Portugal versus European incidence: A critical overview

Persistent organic pollutants (POPs) are widespread compounds, such as organohalogenated compounds, polycyclic aromatic hydrocarbons (PAHs) and pesticides, which can be found in all types of environmental compartments. Their presence in the aquatic environment is a worldwide problem, with emphasis on sediments which act as depository and consequently as a source of hydrophobic, recalcitrant and harmful compounds. Besides, these pollutants might affect the reproduction and mortality of living organisms, diverging in their potential to bioaccumulate in tissues. The present paper aims to review the occurrence of POPs in sediments and biota from the coastal, estuarine and river areas of Portugal. The list of the studied compounds comprises organohalogenated compounds, PAHs, organometallic compounds, pesticides, sterols, fatty acids and pharmaceutical compounds. The contamination of sediments by various pollutants is presented, such as PAHs up to 7,350 ng g^?1 found in Sado estuary and polychlorinated biphenyls up to 62.2 ng g^?1 in the case of sediments collected in Ria de Aveiro. The occurrence of these persistent toxic substances in sediments demonstrates aquatic contamination from agricultural, industrial and urban discharges and the concern about the potential risks to aquatic organisms, wildlife and humans. In fact, several classes of POPs have also been found in biota, such as polychlorinated biphenyls up to 810.9 ng g^?1 in sentinel fish from the Douro River estuary and pesticides in bivalves from the Sado River estuary. The importance of further systematic research on sediments and biota is here highlighted to compare the contamination of these two reservoirs; to assess their spatial and temporal variation; and to determine other classes of POPs that were not investigated yet (e.g., industrial compounds, estrogens and many classes of pharmaceuticals).     

Chromium (VI) remediation by a native strain: effect of environmental conditions and removal mechanisms involved

A native bacterial strain with high capability for Cr (VI) removal was isolated from tannery sediments located in Elena (Córdoba Province, Argentina). The strain was characterized by amplification of 16S rRNA gene and identified as Serratia sp. C8. It was able to efficiently remove different Cr (VI) concentrations in a wide range of pHs and temperatures. The addition of different carbon sources as well as initial inoculum concentration were analyzed, demonstrating that Serratia sp. C8 could reduce 80 % of 20 mg/L Cr (VI) in a medium containing glucose 1 g/L, at pH 6–7 and 28 °C as optimal conditions, using 5 % inoculum concentration. The mechanisms involved in Cr (VI) removal were also evaluated. The strain was capable of biosorpting around 7.5–8.5 % of 20 mg/L Cr on its cell surface and to reduce Cr (VI). In addition, approximately a 54 and 46 % of total Cr was detected in the biomass and in the culture medium, respectively, and in the culture medium, Cr (III) was the predominant species. In conclusion, Serratia sp. C8 removed Cr (VI) and the mechanisms involved in decreasing order of contribution were as follows: reduction catalyzed by intracellular enzymes, accumulation into the cells, and biosorption to the microbial biomass. This strain could be a suitable microorganism for Cr (VI) bioremediation of tannery sediments and effluents or even for other environments contaminated with Cr.     

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources

Point velocity measurements conducted by traversing a Pitot tube across the cross section of a flow conduit continue to be the standard practice for evaluating the accuracy of continuous flow-monitoring devices. Such velocity traverses were conducted in the exhaust duct of a reduced-scale analog of a stationary source, and mean flow velocity was computed using several common integration techniques. Sources of random and systematic measurement uncertainty were identified and applied in the uncertainty analysis. When applicable, the minimum requirements of the standard test methods were used to estimate measurement uncertainty due to random sources. Estimates of the systematic measurement uncertainty due to discretized measurements of the asymmetric flow field were determined by simulating point velocity traverse measurements in a flow distribution generated using computational fluid dynamics. For the evaluated flow system, estimates of relative expanded uncertainty for the mean flow velocity ranged from ±1.4% to ±9.3% and depended on the number of measurement locations and the method of integration.

Implications:Accurate flow measurements in smokestacks are critical for quantifying the levels of greenhouse gas emissions from fossil-fuel-burning power plants, the largest emitters of carbon dioxide. A systematic uncertainty analysis is necessary to evaluate the accuracy of these measurements. This study demonstrates such an analysis and its application to identify specific measurement components and procedures needing focused attention to improve the accuracy of mean flow velocity measurements in smokestacks.     

Ptaquiloside in bracken spores from Britain

Secondary metabolites from bracken fern (Pteridium aquilinum (L.) Kuhn) are suspected of causing cancer in humans. The main carcinogen is the highly water-soluble norsesquiterpene glucoside ptaquiloside, which may be ingested by humans through food, e.g. via contaminated water, meat or milk. It has been postulated that carcinogens could also be ingested through breathing air containing bracken spores. Ptaquiloside has not previously been identified in bracken spores. The aim of the study was to determine whether ptaquiloside is present in bracken spores, and if so, to estimate its content in a collection of spores from Britain. Ptaquiloside was present in all samples, with a maximum of 29 μg g^?1, which is very low compared to other parts of the fern. Considering the low abundance of spores in breathing air under normal conditions, this exposure route is likely to be secondary to milk or drinking water.     

Determination of micropollutants in combined sewer overflows and their removal in a wastewater treatment plant (Seoul,South Korea)

The present study investigated the occurrence of 29 selected micropollutants such as endocrine disrupting compounds (EDCs) and pharmaceuticals and personal care products (PPCPs) in surface waters and wastewaters in Seoul (South Korea) during both dry and wet weather conditions. The study area was selected based on the lack of available information regarding the suspected contamination of rivers/creeks by EDCs and PPCPs in the Seoul region and the presence of a wastewater treatment plant (WWTP), which serves approximately 4.1 million inhabitants and has a design capacity of 1,297?×?10³ m³/day. Many target compounds (83 %) were detected in samples collected from wastewater treatment influent/effluent, creek water, and combined sewer overflow (CSO). The total EDC/PPCP concentrations were as follows: WWTP influent (69,903 ng/L)?>?WWTP effluent (50,175 ng/L) >3 creek samples (16,035–44,446 ng/L) during dry weather, and WWTP influent (53,795 ng/L)?>?WWTP bypass (38,653 ng/L) >5 creek samples (15,260–29,113 ng/L) >2 CSO samples (11,109–11,498 ng/L) during wet weather. EDCs and PPCPs were found to be present at high daily loads (65.1 and 69.8 kg/day during dry and wet weather, respectively) in the WWTP effluent. Compound removal by the WWTP varied significantly by compound: caffeine, diclofenac, ibuprofen, naproxen, and propylparaben (>90 %), and acesulfame, DEET, iohexol, iopromide, and iopamidol (<5 %). These findings and literature information support the hypothesis that the efficiency of removal of EDCs and PPCPs is strongly dependent on both removal mechanism (e.g., biodegradation, adsorption to sludge, and oxidation by chlorine) and compound physicochemical properties (e.g., pK _a and hydrophobicity).