固定化微生物菌种的筛选与鉴定

以菲、芘作为降解对象 ,对多种菌株进行筛选 ,从中挑选出降解率最高的两株菌 ,细菌和真菌各一株 ,并对其生长曲线进行测定 ,为菌种的固定化提供了一定的依据。同时对菌种进一步鉴定 ,细菌为动胶杆菌 (Zoogloeasp .) ,在 72h内对菲、芘的降解率为 87 82 %和 4 9 2 2 % ;真菌为镰刀菌 (Fuariumsp .) ,在 2 16h内对菲、芘的降解率为 93 32 %和 96 2 9%。     

17α-甲基睾酮对稀有鮈鲫肝脏脂质代谢的影响

环境内分泌干扰物对环境影响十分严重,绝大部分进入水环境,危害水生生物健康,进而影响人类健康.17α-甲基睾酮(17α-methyltestosterone,MT)是一种常见的环境雄激素,但在鱼体内的作用机制尚不明确.为了探究MT对鱼类肝脏脂质代谢的影响,采用不同浓度的MT(0、25、50和100 ng·L-1)处理864尾稀有鮈鲫(Gobiocypris rarus),分别在7、14和21 d取肝脏样品.用石蜡组织切片(H-E染色)研究MT对稀有鮈鲫肝脏组织的影响;用RT-qPCR检测4个内参基因的稳定性及5个脂质代谢相关基因(acaca、acacb、fasn、gpat1和cpt1α)的mRNA表达;用ELISA法测定肝脏中甘油三酯的含量.结果 表明,MT会对稀有鮈鲫肝脏造成一定程度的影响,50 ng·L-1 MT处理14 d,肝脏组织损伤最明显.25 ng·L-1和50 ng·L-1 MT处理14 d,相关基因的表达均显著变化(P＜0.05).mRNA表达与组织学结果均表明50 ng·L-1 MT对稀有鮈鲫肝脏影响最为显著.100ng·L-1 MT处理21 d,acaca、cpt1α和gpat1基因表达量显著下降(P＜0.05).MT对雌鱼肝脏甘油三酯影响较雄鱼大.综上,MT通过影响肝脏脂质代谢相关基因mRNA的表达,干扰了稀有鮈鲫肝脏脂质代谢过程,进而对肝脏产生不同程度的损伤.由于MT在不同性别鱼体内的代谢途径不同,推测MT在稀有觞鲫体内可能被芳香化为雌激素(ME),从而发挥部分雌激素作用.     

硫酸铜和马度米星铵联合暴露对鲫鱼的毒性和效应标记物研究

为探究硫酸铜和马度米星铵对水产动物的生态毒性,本研究以鲫鱼为模型,从急性毒性、亚急性毒性和遗传毒性3个方面研究硫酸铜和马度米星铵单一与联合暴露对鲫鱼的毒性效应.结果 表明,硫酸铜对鲫鱼96 h的半数致死浓度(50％ lethal concentration,LC50)为3.6 mg·L-1,硫酸铜和马度米星铵联合暴露时,硫酸铜对鲫鱼的96 h-LC50为1.4 mg· L-1,马度米星铵对鲫鱼的96 h-LC50为4.2 mg·L-1,硫酸铜对鲫鱼为高等毒性;硫酸铜和马度米星铵对鲫鱼的联合毒性表现为协同作用.染毒第7天,硫酸铜和马度米星铵均可影响过氧化氢酶(catalase,CAT)和谷胱甘肽过氧化物酶(glutathione peroxidase,GPx)的活性,随着剂量和染毒时间的增加,CAT和GPx的活性逐渐下降.硫酸铜和马度米星铵单一或联合暴露7d或21 d显著下调cat基因表达,对sod和gpx基因表达无显著影响.染毒后期,染毒组谷丙转氨酶(alanine aminotransferase,ALT)、谷草转氨酶(aspartate transaminase,AST)和碱性磷酸酶(alkaline phosphatase,ALP)活性及丙二醛(malondialdehyde,MDA)含量均高于对照组.硫酸铜和马度米星铵单一及联合染毒均能诱导鲫鱼红细胞产生微核,微核数与硫酸铜和马度米星铵的浓度呈正相关;随着硫酸铜和马度米星铵浓度的增加,肝细胞的脱氧核糖核酸(deoxyribonucleic acid,DNA)出现断裂,彗星尾部所占比例逐渐升高;高浓度联合染毒组红细胞微核率和肝细胞尾部DNA百分比显著高于单一染毒组.硫酸铜和马度米星铵联合暴露可导致鲫鱼血液毒性、肝细胞氧化损伤及遗传毒性的加和性,为评估Cu2+与马度米星铵复合污染对鲫鱼的生态毒性提供基础数据和理论依据.     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

Inhibition character of crotonaldehyde manufacture wastewater on biological acidification

• The inhibition of the main organic pollutions in CMW was demonstrated. • Variations of AK and BK showed a high correlation with the SAA of Ac and n-Bu. • The inhibitory degree was in the order of Ac>n-Bu for individual toxicants. • Biodegradation products of the main toxicants were analyzed. This work aims to investigate the inhibitory effect of crotonaldehyde manufacture wastewater (CMW) on biological acidification. To reveal the inhibitory effect of wastewater to the anaerobic granular sludge (AnGS), variations of the specific acidogenic activity (SAA) and activities of key enzymes were investigated. The results indicated that the dosage of CMW causing a 50% effect concentration (EC₅₀) on the activity of total volatile fatty acids (TVFA) production was 380 mg COD/g VSS. The inhibitory effect of individual toxicants in CMW on the activity of TVFA production were in the order of crotonaldehyde>ethyl sorbate>(E,E)-2,4-hexadienal, and their inhibitory degrees on individual VFA products were acetic acid (Ac)>n-butyric acid (n-Bu), which could correspond to the variations in the activities of acetate kinase (AK) and butyrate kinase (BK). Furthermore, the combined effect of three toxicants on the activity of TVFA production was significantly higher than that of any individual toxicant, and the contribution of the relative toxicity to CMW was 77.27%. Additionally, the biodegradation products of the main toxicants indicated that the removal of crotonaldehyde and (E,E)-2,4-hexadienal was primarily due to the hydrogenation of alkene and aldehyde and the oxidation of aldehyde. Nevertheless, the removal of ethyl sorbate was primarily based on adsorption. In conclusion, biological acidification has a limited ability to treatment CMW, therefore, a further pretreatment technology should be used to remove the main toxicant of wastewater.     

Aerosol transmission,an indispensable route of COVID-19 spread: case study of a department-store cluster

• Aerosol transmission is an indispensable route of COVID-19 spread. • Different outbreak sites have different epidemiologic feature. • SRAS-CoV-2 can exist for a long time in aerosol. • SRAS-CoV-2 RNA can be detected in aerosol in diverse places. • Some environmental factors can impact SARS-CoV-2 transportation in aerosol. Patients with COVID-19 have revealed a massive outbreak around the world, leading to widespread concerns in global scope. Figuring out the transmission route of COVID-19 is necessary to control further spread. We analyzed the data of 43 patients in Baodi Department Store (China) to supplement the transmission route and epidemiological characteristics of COVID-19 in a cluster outbreak. Incubation median was estimated to endure 5.95 days (2–13 days). Almost 76.3% of patients sought medical attention immediately upon illness onset. The median period of illness onset to hospitalization and confirmation were 3.96 days (0–14) and 5.58 days (1–21), respectively. Patients with different cluster case could demonstrate unique epidemiological characteristics due to the particularity of outbreak sites. SRAS-CoV-2 can be released into the surrounding air through patient’s respiratory tract activities, and can exist for a long time for long-distance transportation. SRAS-CoV-2 RNA can be detected in aerosol in different sites, including isolation ward, general ward, outdoor, toilet, hallway, and crowded public area. Environmental factors influencing were analyzed and indicated that the SARS-CoV-2 transportation in aerosol was dependent on temperature, air humidity, ventilation rate and inactivating chemicals (ozone) content. As for the infection route of case numbers 2 to 6, 10, 13, 16, 17, 18, 20 and 23, we believe that aerosol transmission played a significant role in analyzing their exposure history and environmental conditions in Baodi Department Store. Aerosol transmission could occur in some cluster cases when the environmental factors are suitable, and it is an indispensable route of COVID-19 spread.     

Remediation of 2,4-dichlorophenol-contaminated groundwater using nano-sized CaO2 in a two-dimensional scale tank

• Nano CaO₂ is evaluated as a remediation agent for 2,4-DCP contaminated groundwater. • 2,4-DCP degradation mechanism by different Fe²⁺ concentration was proposed. • 2,4-DCP was not degraded in the system for solution pH>10. • The 2,4-DCP degradation area is inconsistent with the nano CaO₂ distribution area. This study evaluates the applicability of nano-sized calcium peroxide (CaO₂) as a source of H₂O₂ to remediate 2,4-dichlorophenol (2,4-DCP) contaminated groundwater via the advanced oxidation process (AOP). First, the effect and mechanism of 2,4-DCP degradation by CaO₂ at different Fe concentrations were studied (Fenton reaction). We found that at high Fe concentrations, 2,4-DCP almost completely degrades via primarily the oxidation of •OH within 5 h. At low Fe concentrations, the degradation rate of 2,4-DCP decreased rapidly. The main mechanism was the combined action of •OH and O₂^•−. Without Fe, the 2,4-DCP degradation reached 13.6% in 213 h, primarily via the heterogeneous reaction on the surface of CaO₂. Besides, 2,4-DCP degradation was significantly affected by solution pH. When the solution pH was>10, the degradation was almost completely inhibited. Thus, we adopted a two-dimensional water tank experiment to study the remediation efficiency CaO₂ on the water sample. We noticed that the degradation took place mainly in regions of pH<10 (i.e., CaO₂ distribution area), both upstream and downstream of the tank. After 28 days of treatment, the average 2,4-DCP degradation level was ≈36.5%. Given the inadequacy of the results, we recommend that groundwater remediation using nano CaO₂: (1) a buffer solution should be added to retard the rapid increase in pH, and (2) the nano CaO₂ should be injected copiously in batches to reduce CaO₂ deposition.     

Using regression models to evaluate the formation of trihalomethanes and haloacetonitriles via chlorination of source water with low SUVA values in the Yangtze River Delta region,China

The purpose of this study was to develop the multiple regression models to evaluate the formation of trihalomethanes (THMs) and haloacetonitriles (HANs) during chlorination of source water with low specific ultraviolet absorbance (SUVA) in Yangtze River Delta, China. The results showed that the regression models of THMs exhibited good accuracy and precision, and 86–97 % of the calculated values fell within ±25 % of the measured values. While the HANs models showed relatively weak evaluation ability, as only 75–83 % of the calculated values were within ±25 % of the measured values. The organic matter [dissolved organic carbon (DOC) or UV absorbance at 254 nm] and bromide exerted the most important influence on the formation of HANs. While for THMs, besides the organic matter and bromide, reaction time was also a key factor. Comparing the models for total THMs (T-THMs) in this study with others revealed that the regression models from the low SUVA waters may have low DOC coefficients, but high bromide coefficients as compared with those from the high SUVA waters.     

PSAT和BPA在电力系统潮流计算中的对比研究

针对当前电力系统分析程序存在差异的问题,从潮流计算角度,对比研究了国内目前使用较为普遍的2款潮流计算程序(PSAT和PSD-BPA),分析了收敛误差、发电机分接头、负荷比例等不同初值条件设置对其潮流计算结果的影响。分析结果表明:PSAT在建模、可视化和自定义方面具有一定优势,比较适合小规模电网仿真和自定义元件模型研究;而BPA的计算速度快,计算精度高,比较适合大规模电网仿真。     

四川乡村点新粒子生成特征及其对云凝结核数浓度的贡献

为揭示成渝地区大气复合污染成因,选择乡村点资阳站的冬季,实测了颗粒物数浓度及其粒径谱分布、云凝结核(CCN),在二氧化硫、光解速率(JO1D)实测值基础上估算了新粒子生成的重要前体物气态硫酸的浓度.2012年12月5日到2013年1月5日观测期间,3~582nm颗粒物数浓度水平较高,平均值为(16072±9713)cm-3.颗粒物数谱分布呈现以积聚模态为主体的特征,占总颗粒物数浓度的46%,此比值高于我国北京、上海、广州等城市和珠江三角洲及长江三角洲的乡村点和背景点.在较高颗粒物凝结汇(CS)水平下[(4.3±3.6)×10-2s-1],甄别出7次新粒子生成(NPF)事件,占观测天数的23%.NPF事件发生时,颗粒物生成速率与增长速率分别为(5.2±1.4)cm-3s-1,(3.6±2.5)nm/h. NPF事件对CCN数浓度有明显贡献,NPF发生后CCN数浓度平均增长19%.