Comparative study of extraction methods for the determination of PAHs from contaminated soils and sediments

The following four methods were compared on the extraction efficiency of 16 EPA (US Environmental Protection Agency) polycyclic aromatic hydrocarbons (PAHs): German method of the Verband Deutscher Landwirtschaftlicher Untersuchungs und Forschungsanstalten (VDLUFA), two methods of the International Organization for Standardization using shaking (ISO A) and Soxhlet extraction (ISO B) and an ultrasonic method. Recovery rates of 16 PAHs were determined in two soils. Extraction efficiency was evaluated in five soils and three sediments. Effect of drying soils and sediments on extraction efficiency was tested using the VDLUFA and the ultrasonic methods. Our study shows that the number of aromatic rings, rather than extraction procedures, significantly influenced recovery rates of individual PAHs. No significant differences in extraction efficiency of the four methods were observed for less polluted samples. For highly polluted soils, extraction efficiency decreased in the following order: VDLUFA method > ISO A > ultrasonic method > ISO B. Influence of soil moisture on extraction efficiency depended to some extent on both solvent used and content of PAHs in samples. A mixture of dichloromethane/acetone (5:1) is recommended for PAH extraction from moist samples when the ultrasonic method is used.     

Distribution of polycyclic aromatic hydrocarbons in agricultural soils in South Korea

The content and type of polycyclic aromatic hydrocarbons (PAH) in soils from paddy fields and upland areas in South Korea were determined using gas chromatography linked to mass spectrometry (GC–MS). The distribution map of total PAH content was obtained as a contour plot using a geographical information system. The overall distribution of PAH was found to be closely related to the pollution sources, the size of city and the type of industry. The average content of total PAH in all samples was 236 μg kg⁻¹, and the range was from 23.3 to 2834 μg kg⁻¹. The highest concentrations were found in soils sampled near iron processing plants. The concentration of PAH decreased in the order fluoroanthene>benzo(b)fluoroanthene>pyrene. Special PAH compound ratios, such as phenanthrene/anthracene and fluoroanthene/pyrene, were calculated to evaluate the origin. The collected data suggested that the pyrogenic origins such as motor vehicle exhaust and heavy industry emission were the dominant source of PAH in Korean soils.     

土壤-纳滤系统处理再生水补充地下水的研究

为充分保障再生水回灌地下时的水质安全、提供高质量地下水资源,在土壤处理系统中嵌入纳滤技术强化对再生水的处理效果,并初步探讨土壤系统作为前处理对纳滤膜污染的控制机理.结果表明,未采用臭氧氧化预处理前,土壤处理对再生水DOC和UV254的平均去除率分别为22%和20%.臭氧氧化对UV254的平均去除率为51%,并将土壤对D...     

Comparative quantification of oxygen release by wetland plants: electrode technique and oxygen consumption model

Understanding oxygen release by plants is important to the design of constructed wetlands for wastewater treatment. Lab-scale systems planted with Phragmites australis were studied to evaluate the amount of oxygen release by plants using electrode techniques and oxygen consumption model. Oxygen release rate (0.14 g O₂/m²/day) measured using electrode techniques was much lower than that (3.94–25.20 gO₂/m²/day) calculated using the oxygen consumption model. The results revealed that oxygen release by plants was significantly influenced by the oxygen demand for the degradation of pollutants, and the oxygen release rate increased with the rising of the concentration of degradable materials in the solution. The summary of the methods in qualifying oxygen release by wetland plants demonstrated that variations existed among different measuring methods and even in the same measuring approach. The results would be helpful for understanding the contribution of plants in constructed wetlands toward actual wastewater treatment.     

典型化工集中区环境空气SVOCs污染特征及来源解析

于冬春两季在华东3个典型石化化工集中区设置环境空气观测点,利用PUF大气被动采样技术(PUF-PAS)采集大气中半挥发性有机化合物(SVOCs),使用气相色谱-质谱联用仪(GC-MS)进行分析.获得59种SVOCs的浓度,包括25种多环芳烃(PAHs)、24种正构烷烃及10种藿烷,并结合主成分分析和特征比值法解析PAHs来源.结果表明:①各观测点正构烷烃贡献率最高,其次是PAHs,分别超过60％和30％;②根据各化合物冬春季浓度变化并结合风向进行分析,推测正构烷烃C18、C29 αβ-藿烷和C30αβ-藿烷与石油化工排放有关;③PAHs单体以菲(Phe)、荧蒽(Fla)、萘(Nap)、芴(Flu)和芘(Pyr)为主,合计占比高达90.0％;④主成分分析显示观测点PAHs主要来自化石燃料燃烧、机动车尾气和石化工艺排放等,3类来源对PAHs的贡献率分别为56.0％、19.2％和8.6％,基于特征比值法的PAHs来源解析予以了验证.     

Removal of polycyclic aromatic hydrocarbons and phenols from coking wastewater by simultaneously synthesized organobentonite in a one-step process

The optimal condition for a one-step process removing organic compounds from coking wastewater by simultaneously synthesized organobentonite as a pretreatment was investigated. Results showed that sorption of organic compounds by organobentonite was positively correlated to the cation surfactant exchange on the bentonite and the octanol-water partition coefficient (K_ow) of the solutes. With 0.75 g/L bentonite and 180 mg/L (60% of bentonite cation exchange capacity) cetyltrimethylammonium bromide, the removal efficiencies of the 16 polycyclic aromatic hydrocarbon (PAHs) specified by the US Environmental Protection Agency in coking wastewater except naphthalene were more than 90%, and that of benzo(a)pyrene was 99.5%. At the same time, the removal efficiencies of COD_Cr, NH₃-N, volatile phenols, colour and turbidity were 28.6%, 13.2%, 8.9%, 55% and 84.3%, respectively, and the ratio of BOD₅/COD_Cr increased from 0.31 to 0.41. These results indicated that the one-step process had high removal efficiency for toxic and refractory hydrophobic organic compounds, and could improve the biodegradability of the coking wastewater. Therefore it could be a promising technology for the pretreatment of toxic and refractory organic wastewater.     

N263溶剂萃取分析环境样品中微量放射性钍

本文用阴离子交换剂N_(263)作为钍的萃取剂,使待测样品中的钍与铀、镭、铁、稀土等杂质元素分离,并对萃取与反萃取,干扰离子,回收率等因素进行了研究.拟定了硝酸体系萃取,盐酸反萃取,偶氮胂Ⅲ比色测定的分析方法,同时测定了土壤、植物、煤及水样中钍含量.     

被动采样分析法用于空气监测优化布点的质量保证

用被动采样分析方法测定空气中SO2和NO2,在工作制度、人员、仪器等方面有严格的质量保证措施.膜片空白质控图表明,其方法和膜片是受控的,与自动监测系统对比,表明相关性良好.     

层次分析法应用于黑龙江省生态环境质量评价研究

将层次分析法应用于生态省建设指标体系的研究,构建了黑龙江省生态省建设指标体系.采用专家调查问卷的方式构造判断矩阵,应用MATLAB6.5计算软件编程,确定了各指标的权重.运用环境质量综合指数模型,对黑龙江省的生态环境质量进行分级,评价黑龙江省生态省建设所取得的进展.结果表明,应用层次分析法定量地评价省域范围生态环境质量是切实可行的,黑龙江省自开展生态省建设以来,生态环境得到了明显改善.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.