The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.     

Comprehensive health condition assessment on partial sewers in a southern Chinese city based on fuzzy mathematic methods

A self-developed sewer health assessment system using the fuzzy comprehensive evaluation and analytical hierarchy process was applied to give a comprehensive health condition evaluation on part of the local sewers in a southern Chinese city based on the sewer video data collected by a sewer inspection closed circuit television （CCTV） robot. Aside from the overall condition evaluation, the structure, function, and stability status of the sewer were also analyzed using the method. A comprehensive index H was proposed to give the overall health condition of pipes with different defects, and Ht, Hs, and If were used to quantify the defects affecting the tightness, stability, and function of the pipe, respectively. Results show that 48% of the inspected pipes were in good condition （0〈H〈0.25）, and about 33% of the sewer pipes analyzed were categorized to be at severe or urgent condition levels （H 〉 0.5）, although most of the pipes were installed only within five years. Frequent sedimentation affects the function of the sewer, and deformation and joint damage affect the structure of the sewer.     

Use of different soft tissues of Perna viridis a s biomonitors of bioavailability and contamination by heavy metals (Cd,Cu, Fe,Pb, Ni,and Zn) in a semi-enclosed intertidal water,the Johore Straits

Green-lipped mussels, Perna viridis, were collected from the eastern and western parts of the Johore Straits in September 2004 and January 2005. Based on the heavy metal concentrations in the different soft tissues (gonad, foot, mantle, gills, muscle, and remaining soft tissues) of these mussel samples, the eastern part of the Johore Straits (which is divided into two portions by a causeway), recorded higher levels of bioavailability and contamination by Cd, Cu, Fe, Ni, and Zn when compared to the western part, while Kg. Pasir Puteh in the eastern part was found to record the highest bioavailability and contamination by heavy metals. The use of different soft tissues of P. viridis as biomonitors of bioavailability and contamination by Cd, Cu, Fe, Pb, Ni, and Zn in the semi-enclosed Johore Straits is proposed, since erroneous results due to spawning and the problem of defecation before dissection could be overcome. Hence, a more accurate interpretation of the bioavailability and contamination by heavy metals in coastal waters could be obtained. To our knowledge, this is the most detailed study on the bioavailability and contamination of heavy metals in the Johore Straits on the Malaysian side of the waterway carried out by using the different soft tissues and metal distribution based on the Mussel Watch approach.     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Classification of floristic composition of mangrove forests using hyperspectral data: case study of Bhitarkanika National Park, India

The aim of the present work is to unveil the potential of some of the unexplored remote sensing techniques for mangrove studies. The paper deals with the classification of an Earth Observing–1 Hyperion image of the mangrove area of Bhitarkanika National Park, Odisha, India into mangrove floristic composition classes. Out of 196 calibrated bands of the image, 56 were found to be highly uncorrelated and contained maximum information; therefore, these 56 bands were used for classification. Amongst the three full–pixel classifiers tested in the investigation, Support Vector Machine produced the best results in terms of training pixel accuracy with overall precision of 96.85 %, in comparison to about 70–72.0 % for the other two classifiers. A total of five mangrove classes were obtained – pure or dominant class of Heritiera fomes, mixed class of H. fomes, mixed Excoecaria agallocha with Avicennia officinalis, mixed class of fringing Sonneratia apetala and class comprising of mangrove associates with salt resistant grasses. Post–classification field data also established the same. Pure or dominant classes of H. fomes occupied more than 50 % of the total mangrove vegetation in the forest blocks of the National Park. Spectral profile matching of image pixels with that of in–situ collected canopy reflectance profile revealed good match for H. fomes (pure or dominant stands). Red–edge index, which was a preferred criterion for matching was notably correlated in case of H. fomes and E. agallocha. The outcomes indicated the efficacy of hyperspectral canopy reflectance library for such kind of work. It is hoped that the methodology presented in this paper will prove to be useful and may be followed for producing mangrove floristic maps at finer levels.     

Concentrations and accumulation profiles of PCDDs, PCDFs and dioxin-like PCBs in adipose fat tissues of Korean women

Reports on residue levels and accumulation profiles of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in human adipose tissue are scarce in Korea. In this study, concentrations and accumulation features of PCDD/Fs and DL-PCBs were determined in the samples of adipose tissue collected from Korean women in 2007-2008. The total dioxin-like toxic equivalent (TEQ) concentrations (3.4-42 pg g(-1) lipid wt) in Korean adipose tissues were similar to those reported in European and other Asian countries. The relative contributions of individual compounds to total TEQs were as follows: non-ortho PCBs (mean: 45%) > PCDFs (28%) > PCDDs (24%) > mono-ortho PCBs (3%), a pattern similar to those reported for seafoods in Korea. The dominant PCDD/F congeners found in adipose tissues were OCDD and 2,3,4,7,8-PeCDF and dominant PCBs were 118, 156 and 105. No correlation was found between subject's age and concentrations of dioxin-like contaminants. Body mass index was not correlated with concentrations of PCDD/Fs and was negatively (p < 0.001) correlated with concentrations of DL-PCBs. The results of this study provide baseline information on PCDD/Fs and DL-PCBs in adipose tissues of the general population in Korea.     

基于模糊综合评判模型的污水管道缺陷定量化评价方法

利用模糊综合评判模型,从污水管道的密封性、稳定性和功能性三方面分别考虑不同缺陷类型的影响,利用层次分析法确定权重,建立定量化的污水管道缺陷状况评价方法模型.对南方某市一段污水管道进行评判,得到污水管道缺陷综合评价指数H=1.09,其中密封性指数Ht=0.44,稳定性指数Hs=0.78,功能性指数Hf=1.79,判定结果...     

Similarities and differences of metal distributions in the tissues of molluscs by using multivariate analyses

Multivariate analysis including correlation, multiple stepwise linear regression, and cluster analyses were applied to investigate the heavy metal concentrations (Cd, Cu, Fe, Ni, Pb, and Zn) in the different parts of bivalves and gastropods. It was also aimed to distinguish statistically the differences between the marine bivalves and the gastropods with regards to the accumulation of heavy metals in the different tissues. The different parts of four species of bivalves and four species of gastropods were obtained and analyzed for heavy metals. The multivariate analyses were then applied on the data. From the multivariate analyses conducted, there were correlations found between the soft tissues of bivalves and gastropods, but none was found between the shells and the soft tissues of most of the molluscs (except for Cerithidea obtusa and Puglina cochlidium). The significant correlations (P < 0.05) found between the soft tissues were further complemented by the multiple stepwise linear regressions where heavy metals in the total soft tissues were influenced by the accumulation in the different types of soft tissues. The present study found that the distributions of heavy metals in the different parts of molluscs were related to their feeding habits and living habitats. The statistical approaches proposed in this study are recommended for use in biomonitoring studies, since multivariate analyses can reduce the cost and time involved in identifying an effective tissue to monitor the heavy metal(s) bioavailability and contamination in tropical coastal waters.     

Application of constructed wetlands for wastewater treatment in tropical and subtropical regions (2000–2013)

Constructed wetlands (CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option for developing countries. With the goal of promoting sustainable engineered systems that support human well-being but are also compatible with sustaining natural (environmental) systems, the application of CWs has become more relevant. Such application is especially significant for developing countries with tropical climates, which are very conducive to higher biological activity and productivity, resulting in higher treatment efficiencies compared to those in temperate climates. This paper therefore highlights the practice, applications, and research of treatment wetlands under tropical and subtropical conditions since 2000. In the present review, removal of biochemical oxygen demand (BOD) and total suspended solid (TSS) was shown to be very efficient and consistent across all types of treatment wetlands. Hybrid systems appeared more efficient in the removal of total suspended solid (TSS) (91.3%), chemical oxygen demand (COD) (84.3%), and nitrogen (i.e., 80.7% for ammonium (NH)₄-N, 80.8% for nitrate (NO)₃-N, and 75.4% for total nitrogen (TN)) as compared to other wetland systems. Vertical subsurface flow (VSSF) CWs removed TSS (84.9%), BOD (87.6%), and nitrogen (i.e., 66.2% for NH₄-N, 73.3% for NO₃-N, and 53.3% for TN) more efficiently than horizontal subsurface flow (HSSF) CWs, while HSSF CWs (69.8%) showed better total phosphorus (TP) removal compared to VSSF CWs (60.1%). Floating treatment wetlands (FTWs) showed comparable removal efficiencies for BOD (70.7%), NH₄-N (63.6%), and TP (44.8%) to free water surface (FWS) CW systems.     

Application of constructed wetlands for wastewater treatment in tropical and subtropical regions (2000-2013)

Constructed wetlands(CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option for developing countries. With the goal of promoting sustainable engineered systems that support human well-being but are also compatible with sustaining natural(environmental)systems, the application of CWs has become more relevant. Such application is especially significant for developing countries with tropical climates, which are very conducive to higher biological activity and productivity, resulting in higher treatment efficiencies compared to those in temperate climates. This paper therefore highlights the practice,applications, and research of treatment wetlands under tropical and subtropical conditions since 2000. In the present review, removal of biochemical oxygen demand(BOD) and total suspended solid(TSS) was shown to be very efficient and consistent across all types of treatment wetlands. Hybrid systems appeared more efficient in the removal of total suspended solid(TSS)(91.3%), chemical oxygen demand(COD)(84.3%), and nitrogen(i.e.,80.7% for ammonium(NH)4-N, 80.8% for nitrate(NO)3-N, and 75.4% for total nitrogen(TN))as compared to other wetland systems. Vertical subsurface flow(VSSF) CWs removed TSS(84.9%), BOD(87.6%), and nitrogen(i.e., 66.2% for NH4-N, 73.3% for NO3-N, and 53.3% for TN)more efficiently than horizontal subsurface flow(HSSF) CWs, while HSSF CWs(69.8%)showed better total phosphorus(TP) removal compared to VSSF CWs(60.1%). Floating treatment wetlands(FTWs) showed comparable removal efficiencies for BOD(70.7%),NH4-N(63.6%), and TP(44.8%) to free water surface(FWS) CW systems.