Impact of chemical oxidation on soil quality

Oxidation treatment helps to reduce the polycyclic aromatic hydrocarbon (PAH) load in contaminated soils but it may also have an effect on the soil quality. The impact of permanganate and Fenton oxidation on soil quality is investigated. Soil quality is restricted here to the potential for plant growth. Soil samples were collected from an agricultural field (S1) and a former coking plant (S4). Agricultural soil was spiked with phenanthrene (PHE) and pyrene (PYR) at two concentrations (S2: 700 mg PHE kg⁻¹, S3: 700 mg PHE kg⁻¹ and 2100 mg PYR kg⁻¹). Soils were treated with both oxidation processes, and analyzed for PAHs and a set of agronomic parameters. A plant germination and growth test was run with rye-grass on treated soils. Results showed that both treatments produced the expected reduction of PAH concentration (from 64% to 97%). Besides, a significant loss of organic C and N, and strong changes in available nutrients were observed. Permanganate treatment increased the specific surface area and the cation exchange capacity in relation to manganese dioxide precipitation, and produced a rise in pH. Fenton oxidation decreased soil pH and increased the water retention capacity. Plant growth was negatively affected by permanganate, related to lower soil permeability and aeration. Both treatments had an effect on soil properties but Fenton oxidation appeared to be more compatible with revegetation.     

A Benefit‐Cost Analysis of Total Maximum Daily Load Implementation1

Abstract: Total Maximum Daily Load (TMDL) implementation generates benefits and costs from water quality improvements, which are rarely quantified. This analysis examines a TMDL written to address bacteria and aquatic‐life‐use impairments on Abrams and Opequon Creeks in Virginia. Benefits were estimated using a contingent valuation survey of local residents. Costs were based on the number and type of best management practices (BMPs) necessary to achieve TMDL pollution reduction goals. BMPs were quantified using watershed‐scale water quality simulation models (Generalized Watershed Loading Function and Hydrological Simulation Program‐FORTRAN). Based on our projections, the costs to achieve TMDL induced pollution reduction goals outweigh the estimated benefits. Benefit‐cost ratios ranged between 0.1 and 0.3.     

Analytic Modeling of Rainwater Harvesting in the Brazilian Semiarid Northeast

During the past two decades, government efforts to provide water access to rural communities in Brazil's semiarid Northeast region have focused on building systems to capture and store rainwater, most importantly through the One Million Cisterns Program (P1MC). This article presents an analytic model based on daily precipitation data to evaluate the sustainability of rainwater capture. Application of this model to analysis of the P1MC reveals the heterogeneous climate in this region causes large spatial variability in the effectiveness of this program. In addition, the size of the area of capture, the run‐off coefficient of the roofs, and the amount of first‐flush diversion also have important effects. This analysis demonstrates while rainwater capture can offer sufficient water for drinking, as a stand‐alone solution it cannot meet P1MC objectives of guaranteeing sustainable and universal access to water for drinking, cooking, and basic hygiene in all regions and years.     

Insights into real cotton-textile dyeing wastewater treatment using solar advanced oxidation processes

Different advanced oxidation processes (AOPs) were applied to the treatment of a real cotton-textile dyeing wastewater as a pre-oxidation step to enhance the biodegradability of the recalcitrant compounds, which can be further oxidized using a biological process. Tests were conducted on a lab-scale prototype using artificial solar radiation and at pilot scale with compound parabolic collectors using natural solar radiation. The cotton-textile dyeing wastewater presents a lilac color, with a maximum absorbance peak at 641 nm, alkaline pH (pH?=?8.2), moderate organic content (DOC?=?152 mg C L^?1, COD?=?684 mg O₂ L^?1) and low-moderate biodegradability (40 % after 28 days in Zahn–Wellens test). All the tested processes contributed to an effective decolorization and mineralization, but the most efficient process was the solar-photo-Fenton with an optimum catalyst concentration of 60 mg Fe²⁺ L^?1, leading to 98.5 % decolorization and 85.5 % mineralization after less than 0.1 and 5.8 kJ_UV L^?1, respectively. In order to achieve a final wastewater with a COD below 250 mg O₂ L^?1 (discharge limit into water bodies imposed by the Portuguese Legislation-Portaria no. 423/97 of 25 June 1997), considering the combination of a solar-photo-Fenton reaction with a biological process, the phototreatment energy required is 0.5 kJ_UV L^?1, consuming 7.5 mM hydrogen peroxide, resulting in 58.4 % of mineralization $ \left({t}_{30\mathrm{W}}=3.2\ \min; \overline{T}=30.7\ {}^{\circ}\mathrm{C};\overline{\mathrm{pH}}=2.80;{\overline{\mathrm{UV}}}_{G,n}={13\ \mathrm{W}\ \mathrm{m}}^{-2}\right). $      

Bioaccumulation of butyltins and liver damage in the demersal fish Cathorops spixii (Siluriformes,Ariidae)

The toxicity of butyltin compounds (BTs), mainly tributyltin (TBT), has been reported in different organisms. However, such an analysis in fish after field exposure with reference to the related biomarkers has not been commonly observed in the literature. This study presents the uptake of BTs in the liver of a neotropical marine catfish Cathorops spixii in Paranagua Bay, an important estuarine system located in southern Brazil. Two different areas, close to and distant from the harbor, were used for chemical analysis evaluation of hepatotoxicity through genetic, enzymatic, and histopathological biomarkers. The presence of polycyclic aromatic hydrocarbons in bile was also considered as a biomarker. The results showed a significant relationship between TBT levels and the inhibition of biotransformation enzymes and high occurrence of melanomacrophages in fish collected close to the harbor site. These effects were linked to the absence of TBT metabolites in the liver. In the second site, the presence of DBT was associated with an increase in EROD and GST activity. The larger amount of DNA damage as well as the highest oxidative stress was noted in fish from the less TBT-polluted area, where DBT and bile PAHs occurred. These findings showed different impact levels due to or increased by the chronic exposure of biota to BTs.     

Electrochemical removal of synthetic textile dyes from aqueous solutions using Ti/Pt anode: role of dye structure

In this work, the efficiency of electrochemical oxidation (EO) was investigated for removing a dye mixture containing Novacron Yellow (NY) and Remazol Red (RR) in aqueous solutions using platinum supported on titanium (Ti/Pt) as anode. Different current densities (20, 40 and 60 mA cm^?2) and temperatures (25, 40 and 60 °C) were studied during electrochemical treatment. After that, the EO of each of these dyes was separately investigated. The EO of each of these dyes was performed, varying only the current density and keeping the same temperature (25 °C). The elimination of colour was monitored by UV-visible spectroscopy, and the degradation of organic compounds was analysed by means of chemical oxygen demand (COD). Data obtained from the analysis of the dye mixture showed that the EO process was effective in colour removal, in which more than 90 % was removed. In the case of COD removal, the application of a current density greater than 40 mA cm^?2 favoured the oxygen evolution reaction, and no complete oxidation was achieved. Regarding the analysis of individual anodic oxidation dyes, it was appreciated that the data for the NY were very close to the results obtained for the oxidation of the dye mixture while the RR dye achieved higher colour removal but lower COD elimination. These results suggest that the oxidation efficiency is dependent on the nature of the organic molecule, and it was confirmed by the intermediates identified. Figure

Chemical structures of a NY and b RR     

PLA and Organoclays Nanocomposites: Degradation Process and Evaluation of ecotoxicity Using Allium cepa as Test Organism

In this study, nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by the melt intercalation method and the obtained samples were characterized by transmission electron microscopy (TEM). Since composting is an important proposal to the final disposal of biopolymers, the influence of clays on the hydrolytic degradation process of PLA was evaluated by visual analysis and monitoring of molecular weight after periods of 15 and 30 days of degradation in compost. After degradation of the materials in composting environment, the evaluation of cytotoxic, genotoxic and mutagenic effects of compost aqueous extract was carried out using a bioassay with Allium cepa as test organism. The TEM micrographs permitted the observation of different levels of dispersion, including exfoliated regions. In the evaluation of hydrolytic degradation it was noted that the presence of organoclays can decrease the rate of degradation possibly due to the barrier effect of clay layers and/or the higher degree of crystallinity in the nanocomposite samples. Nevertheless, even in the case of nanocomposites, the molecular weight reduction was significant, indicating that the composting process is favorable to the chain scission of PLA in studied materials. In the analysis performed by the bioassay using A. cepa as test organism, it was found that after degradation of the PLA and its nanocomposites the aqueous extract of compost samples induced a decreasing in the mitotic index and an increasing in the induction of chromosomal abnormalities. These results were statistically significant in relation to the negative control (distilled water). By comparing the results obtained for the nanocomposites in relative to pure polymer, there were no statistically significant differences. The types of the observed chromosomal aberrations indicated a possible genotoxic effect of the materials, which may be related to an aneugenic action of PLA degradation products.     

Application of QuEChERS method and gas chromatography-mass spectrometry for the analysis of cypermethrin residue in milk

Analytical methods for the isolation and determination of cypermethrin in milk, based on the solid-phase microextraction (SPME) and QuEChERS methods (Quick, Easy, Cheap, Effective, Rugged, and Safe) are presented. The SPME technique was not appropriate to analyse cypermethrin in milk, even establishing the best extraction conditions, polydimethylsiloxane fiber, 60 min time extraction, 60 °C temperature extraction, addition of salt (NaCl) and stirring rate. The extraction efficiency was low probably because of the matrix constituents. The QuEChERS method involves the extraction of the analyte with acetonitrile and simultaneous liquid-liquid partitioning formed by adding anhydrous MgSO₄ plus NaCl, followed by the removal of residual water and cleanup using a procedure called dispersive solid-phase extraction, in which anhydrous MgSO₄ plus PSA and C18 are mixed with 1 mL of acetonitrile extract. The detection and quantification limits were 0.01 and 0.04 mg kg^?1, respectively, and the percentage recovery obtained ranged from 92 to 105% with relative standard deviations below 7%.     

Assessment of metolachlor and diuron leaching in a tropical soil using undisturbed soil columns under laboratory conditions

In the present study, diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-metoxi-1-methylethyl)acetamide] leaching was studied in undisturbed soil columns collected in a cotton crop area in Mato Grosso State, Brazil. The pesticides were applied to the soil surface in dosages similar to those used in a cotton plantation. To assess the leaching process, soil columns were submitted to simulated rain under laboratory conditions at 25 ± 3°C, in the absence of wind and direct solar radiation. During the rain simulations, leachate solutions were collected and herbicide concentrations were determined. At the end of the experiment, the soil columns were cut into 10 cm sections to determine the remaining herbicide concentrations through the soil profile. Metolachlor was detected in all soil sections, and approximately 4% of the applied mass was leached. Diuron was detected only in the upper two soil sections and was not detected in the leachate. A linear correlation (r > 0.94) between the metolachlor soil concentrations and the organic contents of the soil sections was observed. Mass balance suggests that around 56% of diuron and 40% of metolachlor were degraded during the experiments. Measurements of the water table depth in the area where the samples were collected showed that it varied from 2 to 6 m and is therefore vulnerable to contamination by the studied herbicides, particularly metolachlor, which demonstrated a higher leaching potential.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.