Are white-crowned sparrow badges reliable signals?

Status badges, such as crown plumage, mediate intraspecific interactions. The reliability of crown morphology as a status badge in male mountain white-crowned sparrows (Zonotrichia leucophrys oriantha) is uncertain. We examined morphological and physiological correlates of the proportion of crown that was white (“crown-white”) in 178 male mountain white-crowned sparrows during the 2008–2009 breeding seasons. Using a paired experimental design, we presented territory-holding males with white-enhanced and white-reduced decoys and recorded aggressive behaviors. To assess physiological constraints on signal bluffing, a subsample of birds was captured and released after manipulating natural crowns to simulate bluffed white-enhanced or white-reduced crowns; corticosterone concentrations were assayed from blood drawn upon recapture and after a restraint-induced stressor. We found a significant positive association between crown-white and a measure of body size—tarsus length—which is an established indicator of resource-holding potential. In the decoy challenge, males responded more aggressively toward white-enhanced than white-reduced decoys. In the hormone experiment, white-enhanced birds had higher baseline corticosterone levels, whereas white-reduced birds had similar concentrations to controls. Furthermore, white-enhanced birds had an attenuated restraint-induced corticosterone response, while white-reduced birds mounted a significantly larger increase in corticosterone than controls. Taken together, these findings indicate that crown-white is a reliable status badge of resource-holding potential in male mountain white-crowned sparrows during the breeding season.     

Managing climate change risks in New York City’s water system: assessment and adaptation planning

Managing risk by adapting long-lived infrastructure to the effects of climate change must become a regular part of planning for water supply, sewer, wastewater treatment, and other urban infrastructure during this century. The New York City Department of Environmental Protection (NYCDEP), the agency responsible for managing New York City’s (NYC) water supply, sewer, and wastewater treatment systems, has developed a climate risk management framework through its Climate Change Task Force, a government-university collaborative effort. Its purpose is to ensure that NYCDEP’s strategic and capital planning take into account the potential risks of climate change—sea-level rise, higher temperature, increases in extreme events, changes in drought and flood frequency and intensity, and changing precipitation patterns—on NYC’s water systems. This approach will enable NYCDEP and other agencies to incorporate adaptations to the risks of climate change into their management, investment, and policy decisions over the long term as a regular part of their planning activities. The framework includes a 9-step Adaptation Assessment procedure. Potential climate change adaptations are divided into management, infrastructure, and policy categories, and are assessed by their relevance in terms of climate change time-frame (immediate, medium, and long term), the capital cycle, costs, and other risks. The approach focuses on the water supply, sewer, and wastewater treatment systems of NYC, but has wide application for other urban areas, especially those in coastal locations.     

Evaluating intervention options to achieve environmental benefits in the residential sector

Government intervention schemes in the form of policy instruments and financial incentives or rebates can have a major influence on the adoption of technologies by residential consumers to reduce their natural resource consumption and greenhouse gas emissions. However, the pattern and rate of consumer uptake of voluntary schemes are not always well-understood or easily taken into account in future scenarios analyses. This paper presents an innovative extension of the Bass diffusion model that has been integrated with multi-criteria analysis to enable explicit consideration and balancing of the impacts of technology cost, financial benefits, demographic suitability and household income on the likelihood of adoption. This ‘Intervention Options’ model is formulated into a constrained integer programming problem to allow optimisation of the size and timing of government rebates to maximise adoption rate and, ultimately, environmental benefits. The model’s capability is demonstrated using an Australian case study of 25,000 households, and historical information on the uptake of solar hot water and solar photovoltaic panels in Brisbane, Queensland. Case study results reveal new insights and important context-relevant trends that could assist policy makers to substantially improve the effectiveness of intervention schemes to achieve environmental goals within desired budgets.     

Evaluating the “Catch‐Can” Test for Measuring Lawn Sprinkler Application Rates1

Abstract: The effectiveness of measuring lawn sprinkler application rates using the catch‐can test was evaluated. A survey of sources recommending the catch‐can test for measuring application rates show that catch‐can test procedures differ in the collector type, collector placement, number of collectors, and test duration. Analyses of catch‐can tests were performed to address these procedural differences, with emphasis on the type and number of collectors required to provide a reasonable level of confidence in test results. The accuracy of the catch‐can test generally improves as the number of randomly placed collectors increases. In order to achieve an accuracy of ±25% for 90 out of 100 catch‐can tests, the number of randomly placed collectors required ranged from 6 to over 50 for hand‐move systems, while for in‐ground systems, the number of randomly placed collectors required ranged from 2 to 8, depending on the pressure and percent overlap of the water distribution pattern. As long as a reasonable number of collectors were used when performing a catch‐can test, no consistent differences were observed in catch‐can test results due to type of collectors when using tuna fish cans, soup cans, or coffee mugs.     

The effect of phosphogypsum on greenhouse gas emissions during cattle manure composting

Phosphogypsum (PG), a by-product of the phosphate fertilizer industry, reduces N losses when added to composting livestock manure, but its impact on greenhouse gas emissions is unclear. The objective of this research was to assess the effects of PG addition on greenhouse gas emissions during cattle feedlot manure composting. Sand was used as a filler material for comparison. The seven treatments were PG10, PG20, PG30, S10, S20, and S30, representing the rate of PG or sand addition at 10, 20, or 30% of manure dry weight and a check treatment (no PG or sand) with three replications. The manure treatments were composted in open windrows and turned five times during a 134-d period. Addition of PG significantly increased electrical conductivity (EC) and decreased pH in the final compost. Total carbon (TC), total nitrogen (TN), and mineral nitrogen contents in the final composted product were not affected by the addition of PG or sand. From 40 to 54% of initial TC was lost during composting, mostly as CO(2), with CH(4) accounting for <14%. The addition of PG significantly reduced CH(4) emissions, which decreased exponentially with the compost total sulfur (TS) content. The emission of N(2)O accounted for <0.2% of initial TN in the manure, increasing as compost pH decreased from alkaline to near neutral. Based on the total greenhouse gas budget, PG addition reduced greenhouse gas emissions (CO(2)-C equivalent) during composting of livestock manure by at least 58%, primarily due to reduced CH(4) emission.     

Occurrence and fate of pharmaceuticals and personal care products (PPCPs) in biosolids

Each year, large quantities of pharmaceuticals and personal care products (PPCPs) are used worldwide. Once conveyed to wastewater treatment plants, PPCPs can remain unchanged or undergo partial or complete transformation during wastewater treatment processes before discharge into the environment via effluent and biosolids for land application. Biosolids can be a major sink for some PPCPs. Previous investigations have indicated that land application of biosolids may be a potential important route through which PPCPs enter the environment. However, no information is available on exactly how closely the concentrations of PPCPs in the environmental media are related to the land application of PPCP-containing biosolids. This paper reviews currently available information on the occurrence of PPCPs in biosolids, methods of analysis, the potential fate of PPCPs in biosolids-applied soils, and composting as a potential means for removal of PPCPs from biosolids.     

Biodegradability of a Selected Range of Polymers and Polymer Blends and Standard Methods for Assessment of Biodegradation

Synthetic polymers are important to the packaging industry but their use raises aesthetic and environmental concerns, particularly with regard to solid waste accumulation problems and the threat to wildlife. Some concerns are addressed by attention to problems associated with source reduction, incineration, recycling and landfill. Others are addressed by the development of new biodegradable polymers either alone or in blends. Materials used for biodegradable polymers include various forms of starch and products derived from it, biopolyesters and some synthetic polymers. Starch is rapidly metabolised and is an excellent base material for polymer blends or for infill of more environmentally inert polymers where it is metabolised to leave less residual polymer on biodegradation. This should help to improve the environmental impact of waste disposal. A number of standard methods have been developed to estimate the extent of biodegradability of polymers under various conditions and with a variety of organisms. They tend to be used mainly in the countries where they were developed but there is much overlap between the standards of different countries and wide scope for development of consistent and international standards.     

Monitoring global change: Comparison of forest cover estimates using remote sensing and inventory approaches

Satellite-based remote sensing offers great potential for frequent assessment of forest cover over broad spatial scales, however, calibration and validation using ground-based surveys are needed. In this study, forest cover estimates for the United States from a recently developed land surface cover map generated from satellite remote sensing data were compared to state-level inventory data from the U.S. National Resources Planning Act Timber Database. The land cover map was produced at the U.S. Geological Survey EROS Data Center and is based on imagery from the AVHRR sensor (spatial resolution 1.1 km). Vegetation type was classified using the temporal signal in the Normalized Difference Vegetation Index derived from AVHRR data. Comparisons revealed close agreement in the estimate of forest cover for extensively forested states with large polygons of relatively similar vegetation such as Oregon. Larger forest cover differences were observed in other states with some regional patterns in the level of agreement apparent.Comparisons in inventory- and remote sensing-based estimates of current forested area with potential vegetation maps indicated the magnitude of past land use change and the potential for future changes. The remote sensing approach appears to hold promise for conducting surveys of forest cover where inventory data are limited or where rates of vegetation change, due to human or climatic factors, are rapid.