CO2 storage capacity estimation: Methodology and gaps

Implementation of CO₂ capture and geological storage (CCGS) technology at the scale needed to achieve a significant and meaningful reduction in CO₂ emissions requires knowledge of the available CO₂ storage capacity. CO₂ storage capacity assessments may be conducted at various scales—in decreasing order of size and increasing order of resolution: country, basin, regional, local and site-specific. Estimation of the CO₂ storage capacity in depleted oil and gas reservoirs is straightforward and is based on recoverable reserves, reservoir properties and in situ CO₂ characteristics. In the case of CO₂-EOR, the CO₂ storage capacity can be roughly evaluated on the basis of worldwide field experience or more accurately through numerical simulations. Determination of the theoretical CO₂ storage capacity in coal beds is based on coal thickness and CO₂ adsorption isotherms, and recovery and completion factors. Evaluation of the CO₂ storage capacity in deep saline aquifers is very complex because four trapping mechanisms that act at different rates are involved and, at times, all mechanisms may be operating simultaneously. The level of detail and resolution required in the data make reliable and accurate estimation of CO₂ storage capacity in deep saline aquifers practical only at the local and site-specific scales. This paper follows a previous one on issues and development of standards for CO₂ storage capacity estimation, and provides a clear set of definitions and methodologies for the assessment of CO₂ storage capacity in geological media. Notwithstanding the defined methodologies suggested for estimating CO₂ storage capacity, major challenges lie ahead because of lack of data, particularly for coal beds and deep saline aquifers, lack of knowledge about the coefficients that reduce storage capacity from theoretical to effective and to practical, and lack of knowledge about the interplay between various trapping mechanisms at work in deep saline aquifers.     

WATER MANAGEMENT IN ONTARIO1

ABSTRACT: The Ontario Ministry of the Environment has based its water quality management approach on a set of guidelines published in 1970. In light of the changing societal and economic background, advancement in technology and scientific knowledge, and philosophical attitudes towards water management, the water management program was recently revised. Factors influencing the revised approach, including federal-provincial interrelationships and international commitments under the Canada-U.S. Agreement, are summarized. The revised program consists of a goal statement, policies to implement this goal, revised water quality objectives, and detailed implementation procedures for field staff use. Rather than promulgating regulations to impose arbitrary effluent or receiving water standards on a province-wide basis, the revised approach involves the imposition of legally enforceable effluent requirements on a case-by-case basis. Although the paper emphasizes the surface water quality program, it also outlines the Ministry's goals, policies, and procedures for the management of surface-water quantity, as well as ground water quality and quantity.     

MR imaging of the fetal musculoskeletal system

Magnetic resonance imaging (MRI) appears to be increasingly used, in addition to standard ultrasonography for the diagnosis of abnormalities in utero. Previous studies have recently drawn attention to the technical refinement of MRI to visualize the fetal bones and muscles. Beyond commonly used T2-weighted MRI, echoplanar, thick-slab T2-weighted and dynamic sequences, and three-dimensional MRI techniques, are about to provide new imaging insights into the normal and the pathological musculoskeletal system of the fetus. This review emphasizes the potential significance of MRI in the visualization of the fetal musculoskeletal system. © 2012 John Wiley & Sons, Ltd.     

Aspekte der Phytoremediation organischer Schadstoffe

Phytoremediation is the quite novel technique of cleaning polluted sites through the use of plants. Phytoremediation methods are comparatively cheap, are accepted by the public and are ecologically advantageous, compared to common technological approaches. Until today, there have been only a few examples for successful applications. One reason is that the processes occurring are complex, and a full clean up may require many years. Plants have an influence on the water balance of a site, they change redox potential and pH, and stimulate microbial activity of the soil. These indirect influences may accelerate degradation in the root zone or reduce the leaching of compounds into the groundwater. Compounds taken up into plants may be metabolised, accumulate, or volatilise into air. Based on these processes, several phytoremediation methods have been developed: Phytoextraction, rhizofiltration, phytostabilisation, rhizound phytodegradation, pump and tree, land farming, phytovolatilisation, hydraulic control and even more. Already in use are plants (and here mainly willows, poplars and grasses) for the degradation of petroleum products, aromatic hydrocarbons (BTEX), chlorinated solvents, explosives and cyanides. Phytotoxicity and pollutants mass balance have rarely been documented carefully. Often, the success of the projects was not controlled, and only estimates can be made about the applicability and the potential of phytoremediation. This lack of experience about possibilities and limitations seems to be a hindrance for a broader use of these techniques.     

Sequentielle Schwermetallextraktion aus Staubniederschl?gen und Stra?ensedimenten Teil I: Sequentielle Schwermetallextraktion von Mikroproben

Für die Anwendung der sequentiellen Schwermetallextraktion auf Proben, die nur im Milligramm-Bereich erhalten werden k?nnen (Mikroproben, wie z. B. Staubniederschl?ge), wurde die Methode vonZeien &Brümmer (1989) weiterentwickelt. Der Extraktionsma?stab wurde um den Faktor 1∶100 verringert und die Reproduzierbarkeit des Verfahrens mit variablen Probenmengen um 20mg und einem Extraktionsvolumen von 500 μl mit Hilfe von Standardb?den nachgewiesen. M?gliche Einflüsse variabler Extraktionsverh?ltnisse (Verh?ltnis von Probenmenge zu Extraktionsvolumen) sowie eine aufwendige Vorbehandlung von Staubproben, die nach der Bergerhoff-Methode (VDI 2119/2, 1972) gesammelt wurden, lagen bei diesen Untersuchungen weitgehend im Variationsbereich des Verfahrens. Die sequentielle Extraktion kann folglich zur Untersuchung der Mobilisierbarkeit von Schwermetallen auch aus Mikroproben mit variablen Probenmengen eingesetzt werden. Mit Hilfe dieses Verfahrens wurden die Mobilisierbarkeiten von Zink, Kupfer und Blei der Schluff- und Tonfraktion von Stra?ensedimenten mit Staubniederschl?gen an zwei urbanen Standorten mit unterschiedlicher, verkehrsbedingter Schwermetallbelastung verglichen. Diese Untersuchungen werden in Teil 2 (“Sequentielle Schwermetallextraktion von st?dtischen St?uben”) vorgestellt.     

Lower thermal capacity limits of the common brown shrimp (Crangon crangon,L.)

Brown shrimp (Crangon crangon, L.) are subjected to a huge annual temperature range, and certain thermal conditions during winter have been identified to affect the brown shrimp population. Despite that, little is known about its thermal biology with regard to critically low temperatures. In the present study, we determined the critical thermal minima (CT_min) and the critical lethal minima (CL_min) of male and female brown shrimp of different body sizes in laboratory-based experiments. For the CT_min trials, shrimp were acclimated to 4.0, 9.0, and 14.0 °C and exposed to a cooling rate of ?0.2 °C min^?1. In the CL_min trials, brown shrimp were exposed to a cooling rate of ?1.0 °C day^?1 without prior thermal acclimation. Acclimation temperature significantly affected the temperature tolerance of brown shrimp (p < 0.001). CT_min among the experimental groups just varied slightly, and no clear effect of gender or body size was observed. In the CL_min trials, brown shrimp even tolerated the coldest temperature of ?1.7 °C that could be established in the experimental setup. However, we observed a negative relationship between temperature and reactivity within the range of 7.0 and 1.0 °C that was determined by means of the flicking response. This relationship suddenly broke between 1.0 and 0.0 °C where an abrupt drop in the reactivity of the shrimp became apparent. The results of this study revealed that brown shrimp hold a wider thermal range as originally reported and that it can cope with subzero temperatures. Implications of low-temperature tolerance are discussed in the context of the brown shrimp’s ecology as well as stock assessment.     

Economic benefits from decreased mercury emissions: Projections for 2020

Anthropogenic processes have increased the exposure of humans and wildlife to toxic methyl mercury (MeHg). Mercury emissions will increase by about 25% between 2005 and 2020, if the present trajectory is maintained. A global assessment of societal damages caused by the ingestion of methyl mercury, based merely on loss of IQ (Intelligence Quotient), suggests that the annual cost will be approximately US$3.7 billion (2005 dollars) in 2020. The corresponding cost of damages resulting from the inhalation of methyl mercury is estimated at US$2.9 million (2005 dollars). Under a higher degree of emission control such as in the case of the Extended Emission Control (EXEC) and the Maximum Feasible Technological Reduction (MFTR) scenarios, total emissions could decrease in the period 2005–2020 by about 50–60%. The corresponding annual benefits in 2020 are estimated to be about US$1.8–2.2 billion (2005 dollars). Large economic benefits can be achieved by reducing global mercury emissions.