Canopy-wake dynamics and wind sheltering effects on Earth surface fluxes

The atmospheric boundary layer adjustment at the abrupt transition from a canopy (forest) to a flat surface (land or water) is investigated in a wind tunnel experiment. Detailed measurements examining the effect of canopy turbulence on flow separation, reduced surface shear stress and wake recovery are compared to data for the classical case of a solid backward-facing step. Results provide new insights into the interpretation for flux estimation by eddy-covariance and flux gradient methods and for the assessment of surface boundary conditions in turbulence models of the atmospheric boundary layer in complex landscapes and over water bodies affected by canopy wakes. The wind tunnel results indicate that the wake of a forest canopy strongly affects surface momentum flux within a distance of 35–100 times the step or canopy height, and mean turbulence quantities require distances of at least 100 times the canopy height to adjust to the new surface. The near-surface mixing length in the wake exhibits characteristic length scales of canopy flows at the canopy edge, of the flow separation in the near wake and adjusts to surface layer scaling in the far wake. Components of the momentum budget are examined individually to determine the impact of the canopy wake. The results demonstrate why a constant flux layer does not form until far downwind in the wake. An empirical model for surface shear stress distribution from a forest canopy to a clearing or lake is proposed.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

A unified approach for including non-extractable residues (NER) of chemicals and pesticides in the assessment of persistence

All chemicals form non-extractable residues (NER) to various extents in environmental media like soil, sediment, plants and animals. NER can be quantified in environmental fate studies using isotope-labeled (such as ¹⁴C or ¹³C) tracer compounds. Previous NER definitions have led to a mismatch of legislation and state of knowledge in research: the residues are assumed to be either irreversibly bound degradation products or at least parts of these residues can be released. In the latter assumption, soils and sediments are a long-term source of slowly released residues. We here present a conceptual experimental and modeling approach to characterize non-extractable residues and provide guidance how they should be considered in the persistence assessment of chemicals and pesticides. Three types of NER can be experimentally discriminated: sequestered and entrapped residues (type I), containing either the parent substance or xenobiotic transformation products or both and having the potential to be released, which has indeed been observed. Type II NER are residues that are covalently bound to organic matter in soils or sediments or to biological tissue in organisms and that are considered being strongly bound with very low remobilization rates like that of humic matter degradation rates. Type III NER comprises biogenic NER (bioNER) after degradation of the xenobiotic chemical and anabolic formation of natural biomolecules like amino acids and phospholipids, and other biomass compounds. We developed the microbial turnover to biomass (MTB) model to predict the formation of bioNER based on the structural properties of chemicals. Further, we proposed an extraction sequence to obtain a matrix containing only NER. Finally, we summarized experimental methods to distinguish the three NER types. Type I NER and type II NER should be considered as potentially remobilizable residues in persistence assessment but the probability of type II release is much lower than that of type I NER, i.e., type II NER in soil are “operationally spoken” irreversibly bound and can be released only in minute amounts and at very slow rates, if at all. The potential of remobilization can be evaluated by chemical, physical and biological methods. BioNER are of no environmental concern and, therefore, can be assessed as such in persistence assessment. The general concept presented is to consider the total amount of NER minus potential bioNER as the amount of xenoNER, type I?+?II. If a clear differentiation of type I and type II is possible, for the calculation of half-life type I NER are considered as not degraded parent substance or transformation product(s). On the contrary, type II NER may generally be considered as (at least temporarily) removed. Providing proof for type II NER is the most critical issue in NER assessment and requires additional research. If no characterization and additional information on NER are available, it is recommended to assess the total amount as potentially remobilizable. We propose our unified approach of NER characterization and evaluation to be implemented into the persistence and environmental hazard assessment strategies for REACH chemicals and biocides, human and veterinary pharmaceuticals, and pesticides, irrespective of the different regulatory frameworks.     

Oceanographic characteristics of areas used by Cory’s shearwaters during short and long foraging trips in the North Atlantic

Many breeding seabird species are central-place foragers and constrained to find productive prey patches within their foraging ranges. We assessed how different populations of a pelagic seabird species, the Cory’s shearwater Calonectris diomedea, breeding in oceanic and neritic conditions, cope with these constraints in the North Atlantic, during both incubation and chick-rearing periods. We analysed 237 foraging trips to study the movements and oceanographic characteristics of foraging habitats of seven different populations of Cory’s shearwaters. Generally, oceanic populations exhibited higher foraging effort, by travelling more time and to more distant areas, and larger home ranges and feeding areas, than the neritic population (i.e. breeding on an island within the Portuguese continental platform). On their short trips (i.e. ≤4 days), birds from the different populations fed mostly in shallower waters around the colony. During long trips (i.e. ≥5 days), feeding areas of both oceanic and neritic populations were characterized by high concentration values of chlorophyll-a, low sea-surface temperature and shallower habitats, with oceanic populations of the Azores exploiting areas north of the islands over known seamounts and frontal regions. Birds from other oceanic population (Selvagens) also exploited the African continental shelf system on their long trips. The home ranges of the different populations overlapped widely, but there was a general spatial segregation in terms of the core feeding areas at the population level. Core feeding areas and areas of foraging overlap between different populations should be important to inform conservation management measures, such as the definition of Marine Important Bird Areas for seabirds over the North Atlantic.     

Sequentielle Schwermetallextraktion aus Staubniederschlägen und Stra\ensedimenten

For the application of our method for the sequential extraction of heavy metals from microsamples presented in part 1 (“Sequentielle Schwermetallextraktion von Mikroproben” — “Sequential Extraction of Heavy Metals from Micro Samples”) an investigation was carried out to evaluate airborne dust fallout and street sediments at two urban sites where different heavy metal immission rates occur due to traffic influence. In the street sediments the total concentrations of zinc, copper and lead was three to fivefold higher in the silt and clay fraction (< 63 μm) than in the particle size fraction (< 1,12 mm), but showed nearly the same mobilisation behaviour. The dust samples showed equal mobilisation behaviour as the street sediments for copper and lead, while zinc was considerably more mobile in the dust samples: In extraction steps I–IV (I: mobile fraction; II: easily deliverable fraction; III: fraction bound to manganese oxides; IV: fraction bound organic to matter) zinc, copper and lead in street sediments, as well as copper and lead in dust samples, were dissolved to 40–70%, whereas about 80% of zinc in the dust samples was already dissolved in extraction step I.     

Principal component analysis of indicator PCB profiles in breast milk from Poland

Principal component analysis (PCA) was applied to a data set containing the levels of indicator polychlorinated biphenyls (PCBs) in human milk of mothers living in the Wielkopolska region, Poland, in order to investigate the information captured in the PCB patterns and to elucidate the relationship between PCB concentrations in milk and donor characteristics. According to the obtained PCA results milk fat content was the most influential factor affecting the PCB levels in milk of the Wielkopolska cohort. The lifestyle data collected from the questionnaire completed by the donors appeared to have no influence on PCB concentrations in breast milk. The score plots revealed the PCB contents of milk were quite low and uniform with a few outliers, without discrimination observed either between the primipareous and secundipareous females or between donors from the urban and rural areas. Comparison of the PCB levels and profiles of human milk from the Wielkopolska region and from various European and Asian locations made by PCA reflected a generally low background exposure and indicated the possible reasons for the outlying of some samples. In order to enhance the chances of observing the relationship between donor habits and PCB levels in breast milk it was suggested that the questionnaire be redesigned to gather information about vegetable product consumption and indoor air exposure.     

Transport and distribution of artificial gamma-emitting radionuclides in the River Yenisei and its sediment

Discharges from the Krasnoyarsk Mining and Chemical Industrial Complex (KMCIC) near Krasnoyarsk resulted in radioactive contamination of sediments of the River Yenisei. Between 1999 and 2006, 16 sediment cores were collected at different positions 15-1500 km downstream from the discharge point. The concentration of artificial gamma-emitting radionuclides (¹³⁷Cs, ⁶⁰Co, ¹⁵²Eu, and ²⁴¹Am) was determined with the objective to analyze the migration processes leading to the transport of these radionuclides along the river and to their vertical distribution within the sediment. In cores taken in the vicinity of the reactors, the average activity concentration of ¹³⁷Cs, ¹⁵²Eu, and ⁶⁰Co was about 1000 Bq kg⁻¹, and the activity concentration of ²⁴¹Am was about 20 Bq kg⁻¹. Contamination levels of artificial radionuclides were decreasing with increasing distance downstream the KMCIC: The fastest decrease of average activity by a factor of 10 over a distance of 300 km was observed for ²⁴¹Am, whereas for ¹³⁷Cs this decrease occurred over a distance of 1100 km. Sequential extraction experiments revealed that in all depths and at all distances the studied radionuclides were tightly bound to the sediment.To investigate the mechanisms of transport of the ¹³⁷Cs and ⁶⁰Co contamination, mathematical models have been used to describe the contamination in the river water and within the sediments.     

Molecular diversity of arbuscular mycorrhizal fungi in relation to soil chemical properties and heavy metal contamination

Abundance and diversity of arbuscular mycorrhizal fungi (AMF) associated with dominant plant species were studied along a transect from highly lead (Pb) and zinc (Zn) polluted to non-polluted soil at the Anguran open pit mine in Iran. Using an established primer set for AMF in the internal transcribed spacer (ITS) region of rDNA, nine different AMF sequence types were distinguished after phylogenetic analyses, showing remarkable differences in their distribution patterns along the transect. With decreasing Pb and Zn concentration, the number of AMF sequence types increased, however one sequence type was only found in the highly contaminated area. Multivariate statistical analysis revealed that further factors than HM soil concentration affect the AMF community at contaminated sites. Specifically, the soils’ calcium carbonate equivalent and available P proved to be of importance, which illustrates that field studies on AMF distribution should also consider important environmental factors and their possible interactions.     

Photocatalytic degradation of dichlorvos in aqueous TiO<Subscript>2</Subscript> suspensions

Introduction  

In the present work, we explored the kinetics of dichlorvos (2,2-dichlorvinyl dimethyl phosphate, DDVP) decay through UV-A light-induced TiO₂ photocatalysis at pH 4 and 9, and the formation of degradation intermediates and final products under specific experimental conditions. Experimental observations and theoretical considerations allowed us to suggest the degradation mechanism of DDVP by the UV/TiO₂ process in aqueous solution.     

Regionalization of climate scenarios impacts on maize production and the role of cultivar and planting date as an adaptation strategy

Understanding climate change and its impacts on crops is crucial to determine adaptation strategies. Simulations of climate change impacts on agricultural systems are often run for individual sites. Nevertheless, the scaling up of crop model results can bring a more complete picture, providing better inputs for the decision-making process. The objective of this paper was to present a procedure to assess the regional impacts of climate scenarios on maize production, as well as the effect of crop cultivars and planting dates as an adaptation strategy. The focus region is Santa Catarina State, Brazil. The identification of agricultural areas cultivated with annual crops was done for the whole state, followed by the coupling of soil and weather information necessary for the crop modeling procedure (using crop model and regional circulation models). The impact on maize yields, so as the effect of adaptation strategies, was calculated for the 2012–2040 period assuming different maize cultivars and planting dates. Results showed that the exclusion of non-agricultural areas allowed the crop model to correctly simulate local and regional production. Simulations run without adaptation strategies for the 2012–2040 period showed reductions of 11.5–13.5 % in total maize production, depending on the cultivar. By using the best cultivar for each agricultural area, total state production was increased by 6 %; when using both adaptation strategies—cultivar and best planting date—total production increased by 15 %. This analysis showed that cultivar and planting date are feasible adaptation strategies to mitigate deleterious effects of climate scenarios, and crop models can be successfully used for regional assessments.