A stochastic Lagrangian micromixing model for the dispersion of reactive scalars in turbulent flows: role of concentration fluctuations and improvements to the conserved scalar theory under non-homogeneous conditions

Several reaction schemes, based on the conserved scalar theory, are implemented within a stochastic Lagrangian micromixing model to simulate the dispersion of reactive scalars in turbulent flows. In particular, the formulation of the reaction-dominated limit (RDL) reaction scheme is here extended to improve the model performance under non-homogeneous conditions (NHRDL scheme). The validation of the stochastic model is obtained by comparison with the available measurements of reactive pollutant concentrations in a grid-generated turbulent flow. This test case describes the dispersion of two atmospheric reactant species (NO and O₃) and their reaction product (NO₂) in an unbounded turbulent flow. Model inter-comparisons are also assessed, by considering the results of state-of-the-art models for pollutant dispersion. The present validation shows that RDL reaction scheme provides a systematic overestimation (relative error of ca. 85% around the centreline) in computing the local reactant consumption/production rate, whereas the NHRDL scheme drastically reduces this gap (relative error lower than 5% around the centreline). In terms of NO₂ production (or reactant consumption), neglecting concentration fluctuations determines overestimations of the product mean of around 100% and a NO₂ local production of one order of magnitude higher than the reference simulation. In terms of standard deviations, the concentration fluctuations of both the passive and reactive scalars are generally of the same order of magnitude or up to 1 or 2 orders of magnitudes higher than the corresponding ensemble mean values, except for the background reactant close to the plume edges. The study highlights the importance of modelling pollutant reactions depending on the instantaneous instead of the mean concentrations of the reactants, thus quantifying the role of the turbulent fluctuations of concentration, in terms of scalar statistics (mean, standard deviation, intensity of fluctuations, skewness and kurtosis of concentration, segregation coefficient, simulated reaction rate). This stochastic particle method represents an efficient numerical technique to solve the convection–diffusion equation for reactive scalars and involves several application fields: micro-scale air quality (urban and street-canyon scales), accidental releases, impact of odours, water quality and fluid flow industrial processes (e.g. combustion).     

Ecological risk and accessibility analysis to assess the impact of roads under Habitats Directive

We propose a method for the appropriate assessment of adverse effects of roads in compliance with the European Union Habitats Directive. The method incorporates an analysis of ecological risk of edge effects by the proposed roads with the related increase in accessibility. The method was tested on 30 km of planned forest roads inside an 8,000-ha reserve included in two Natura 2000 sites. As a result, the cumulative effect of 19 road segments was judged as not significantly affecting the integrity of the sites, although they made accessible an extra 314 ha. On the basis of the accessibility calculation, 20 ha of land were set aside from forest exploitation as a mandatory mitigation measure. The method objectively determined the cumulative adverse effects, enabled comparison of plan revisions and alternatives and proved to measure direct and indirect significant effects with a realistic effort in terms of field survey and geographic information system processing.     

Influence of natural events on the concentration and composition of atmospheric particulate matter

A ten-month field study aimed to determine the contribution of natural events (i.e. sea-salt and mineral dust events) to urban PM concentration was carried out at six sampling sites in Central Italy (Lazio region). Four indicators have been used to identify natural events during the period of the study. The first one is constituted by the ratio between number of particles in the coarse to the accumulation mode. It is simple, cheap, and the information are given in quasi-real time, but the nature of the event (sea-salt or mineral dust) is not detectable. The second indicator relies on the chemical analysis of the collected PM by X-ray fluorescence (XRF) and allows a robust identification of sea-salt and crustal components. The third one is based on diagnostic ratios of elemental fractions: Mg_extractable/Ti_residue for sea-salt and Ti_residue/Sb_residue for mineral dust. It requires skilled staff but it is most accurate and sensible. The last indicator, constructed on the basis of natural radioactivity data, is not diagnostic for the nature of the event but it is able to estimate the increase in PM concentration with respect to the expected concentration in the absence of natural events.The relevance of natural events and the variations in PM concentration and composition during the study are discussed. The joined use of the four indicators allowed the identification of about 20 natural PM episodes. In general, sea-salt aerosol events did not cause exceedance of the daily EU limit value for PM₁₀. Saharan dust events, instead, were in most cases responsible for the exceedance of the limit value at all stations.     

POPs in the Lagoon of Venice: budgets and pathways

Dioxins and furans (PCDD/Fs), polychlorobiphenyls (PCBs) and hexachlorobenzene (HCB) in the ecosystem of the Lagoon of Venice were studied, in order to provide a general picture of conditions in the lagoon in terms of contamination by persistent organic pollutants (POPs). We present here novel data on atmospheric deposition, water, sediment and clam samples collected in the lagoon during the period January 2001-December 2004. Atmospheric deposition was sampled monthly at six sites located both close and far from large industrial and urban sources. Water samples were collected monthly from fifteen stations, and twenty-five samples of sediments and clams (Tapes philippinarum) were collected in four areas where clams are farmed and harvested inside the lagoon. All samples were analysed for PCDD/Fs, PCBs and HCB by HRGC/HRMS in the same laboratory. All samples examined (atmospheric deposition and water) substantially confirmed the spatial pattern reported in previously published data on sediments and atmospheric deposition: the zone surrounding the Porto Marghera petrochemical plant always had the highest levels of POPs (i.e., PCDD/Fs: atmosphere approximately 6 pg of 2,3,7,8-TCDD equivalents (I-TE) m(-2)d(-1); water 0.37 pg I-TEl(-1); sediment: 300 ng kg(-1); clam 2.8 pg I-TE g(-1)), and the minima were found at points on the margins of the lagoon (PCDD/Fs: atmosphere approximately 1 pg I-TEm(-2)d(-1); water 0.05 pg I-TEl(-1); sediment: approximately 5 ng kg(-1); clam approximately 0.2 pg I-TE g(-1)). Intermediate values were often encountered in the historical city centre of Venice and in the central part of the lagoon. To confirm this, new data on correlation between levels of PCDD/F in sediments and clams are reported, both for absolute values and for the PCDD/F "fingerprint". There is always a clear fingerprinting signature (PCDF/PCDD>1) for samples collected near Porto Marghera, and the opposite (PCDF/PCDD<1) in the rest of the lagoon.     

Ecosystem engineering potential of the gastropod Terebralia palustris (Linnaeus, 1767) in mangrove wastewater wetlands - A controlled mesocosm experiment

The effect of different sewage concentrations (0, 20, 60 and 100%), vegetation (Bare, Avicennia marina or Rhizophora mucronata) and immersion periods (immersion/emersion period of 12/12 h or 3/3 days just for 100%) conditions were studied for 6 months on survival and growth rates of Terebralia palustris (Linnaeus, 1767). Gastropods' activity and ecosystem engineering preformed at bare and A. marina planted cells and 3 sewage conditions (0, 20 and 60%) were determined. Survival rates were higher than 70% in all treatments. Growth rate decreased significantly with increasing sewage concentrations (mainly at unplanted conditions) and longer immersion periods. A complete shift (from immersion to emersion periods) and a significant decrease in mobility and consequently its engineer potential, due to sewage contamination, lead to a 3-4 fold decrease in the amount of sediment disturbed. Sewage contamination, primary producers' abundance and environmental conditions may have influenced the gastropods survival, growth and its ecosystem engineering potential.     

Effects of ammonia from livestock farming on lichen photosynthesis

This study investigated if atmospheric ammonia (NH₃) pollution around a sheep farm influences the photosynthetic performance of the lichens Evernia prunastri and Pseudevernia furfuracea. Thalli of both species were transplanted for up to 30 days in a semi-arid region (Crete, Greece), at sites with concentrations of atmospheric ammonia of ca. 60 μg/m³ (at a sheep farm), ca. 15 μg/m³ (60 m from the sheep farm) and ca. 2 μg/m³ (a remote area 5 km away). Lichen photosynthesis was analysed by the chlorophyll a fluorescence emission to identify targets of ammonia pollution. The results indicated that the photosystem II of the two lichens exposed to NH₃ is susceptible to this pollutant in the gas-phase. The parameter PI_ABS, a global index of photosynthetic performance that combines in a single expression the three functional steps of the photosynthetic activity (light absorption, excitation energy trapping, and conversion of excitation energy to electron transport) was much more sensitive to NH₃ than the F_V/F_M ratio, one of the most commonly used stress indicators.     

Efficacy of new mass-trapping devices against Bactrocera oleae (Diptera tephritidae) for minimizing pesticide input in agroecosystems

Decreasing pesticide use in olive groves is central to controlling pathogens and pests such as Bactrocera oleae. This has led to the development of mass trapping devices which not only minimize pesticide use but, with improved efficacy of attractants, also decrease costs associated with pest control and ensures that the quality of olive oil is safe for human consumption. This study was undertaken to test a new device which utilizes reduced quantities of both insecticide (lambda-cyalothrin) as well as the female olive fly pheromone (1,7-dioxaspiro-(5.5)-undecane). The new device was tested against an older device manufactured by the same company. The use of plastic polymers as substrate for encapsulating the pheromone allowed for a slower pheromone release, prolonging the efficacy and duration and thus reducing costs. The density of adult populations was monitored using yellow chromotropic traps that were checked every ten days and the degree of olive infestation, as determined by preimago stages, was assessed by analyzing 100 drupes per plot. Infestation analyses were performed every ten days. The control plot had the lowest density of adults and the highest drupe infestation rate. The new devices were more effective than the older devices in both attracting adults and controlling infestation of drupes. Moreover, the new devices containing reduced amounts of pheromone and insecticide were cheaper and exhibited longer functional efficacy. In addition to the slower release of attractants, the plastic polymers used in these newer devices were also more resistant to mechanical and weather degradations. Results demonstrate that mass trapping can indeed be an effective means of controlling B. oleae via eco-sustainable olive farming.