Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

Nanocomposites of Cellulose Acetate Butyrate Reinforced with Cellulose Nanocrystals

Nanocrystals were prepared by acid hydrolysis of bacterial cellulose microfibrils. These were topochemically trimethylsilylated, in an attempt to reduce their hydrophilicity. Composites were made by dispersing either native or silylated crystals in cellulose acetatebutyrate matrixes and solution casting of the dispersions. Particles were characterized by transmission electron microscopy. The composites were characterized by differential scanning calorimetry and dynamic mechanical analysis. The unmodified cellulose crystals exhibited better reinforcement characteristics than the trimethylsilated crystals.     

The Steubenville Comprehensive Air Monitoring Program (SCAMP): analysis of short-term and episodic variations in PM2.5 concentrations using hourly air monitoring data

One-hour average ambient concentrations of particulate matter (PM) with an aerodynamic diameter < 2.5 microm (PM2.5) were determined in Steubenville, OH, between June 2000 and May 2002 with a tapered element oscillating microbalance (TEOM). Hourly average gaseous copollutant [carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxide (NOx), and ozone (O3)] concentrations and meteorological conditions also were measured. Although 75% of the 14,682 hourly PM2.5 concentrations measured during this period were < or = 17 microg/m3, concentrations > 65 microg/m3 were observed 76 times. On average, PM2.5 concentrations at Steubenville exhibited a diurnal pattern of higher early morning concentrations and lower afternoon concentrations, similar to the diurnal profiles of CO and NO(x). This pattern was highly variable; however, PM2.5 concentrations > 65 microg/m3 were never observed during the mid-afternoon between 1:00 p.m. and 5:00 p.m. EST. Twenty-two episodes centered on one or more of these elevated concentrations were identified. Five episodes occurred during the months June through August; the maximum PM2.5 concentration during these episodes was 76.6 microg/m3. Episodes occurring during climatologically cooler months often featured higher peak concentrations (five had maximum concentrations between 95.0 and 139.6 microg/m3), and many exhibited strong covariation between PM2.5 and CO, NO(x), or SO2. Case studies suggested that nocturnal surface-based temperature inversions were influential in driving high nighttime concentrations of these species during several cool season episodes, which typically had dramatically lower afternoon concentrations. These findings provide insights that may be useful in the development of PM2.5 reduction strategies for Steubenville, and suggest that studies assessing possible health effects of PM2.5 should carefully consider exposure issues related to the intraday timing of PM2.5 episodes, as well as the potential for toxicological interactions among PM2.5, and primary gaseous pollutants.     

Genuine modern analogues of Precambrian stromatolites from caldera lakes of Niuafoʻou Island, Tonga

Calcareous or dolomitic, often secondarily silicified, laminated microbial structures known as stromatolites are important keys to reconstruct the chemical and biotic evolution of the early ocean. Most authors assume that cyanobacteria-associated microbialitic structures described from Shark Bay, Western Australia, and Exuma Sound, Bahamas, represent modern marine analogues for Precambrian stromatolites. Although they resemble the Precambrian forms macroscopically, their microstructure and mineralogical composition differ from those characterizing their purported ancient counterparts. Most Precambrian stromatolites are composed of presumably in situ precipitated carbonates, while their assumed modern marine analogues are predominantly products of accretion of grains trapped and bound by microbial, predominantly cyanobacterial, benthic mats and biofilms and only occasionally by their physicochemical activity. It has therefore been suggested that the carbonate chemistry of early Precambrian seawater differed significantly from modern seawater, and that some present-day quasi-marine or non-marine environments supporting growth of calcareous microbialites reflect the hydrochemical conditions controlling the calcification potential of Precambrian microbes better than modern seawater. Here we report the discovery of a non-marine environment sustaining growth of calcareous cyanobacterial microbialites showing macroscopic and microscopic features resembling closely those described from many Precambrian stromatolites.     

Ökologische Charakterisierung ausgewählter Enchytraeenarten hinsichtlich relevanter Bodeneigenschaften

The aim of this contribution was the ecological characterization of 32 selected terrestrial Central-European enchytraeid species regarding factors of land use, pH-value, grain-size distribution, humus form, and soil moisture. The background of this characterization is generated by the so-called Soil Biological Site-Classification (abbreviated BBSK), a concept for the soil-biological assessment of soils. The crucial point within this concept is the comparison of the theoretically expected soil biocoenosis with the biocoenosis actually detected at a single site. Intending to obtain a simplified management of the parameters mentioned, these were each divided into three to five classes. The data-basis for the ecological characterization was formed by analysing suitable sources of literature with both biological and abiotic data given for one site. The result of the analysis was the frequency of a single species regarding the classes of the viewed soil parameters. On the basis of these results, the enchytraeid coenosis of three adjacent Bavarian sites of different use was predicted exemplarily and the enchytraeid community of these sites was investigated. The comparison of the predicted and detected coenoses showed that the sureness of the forecast varied between the different land uses: for wood and grassland, the prognosis was very precise and satisfactory, whereas the forecast for the agricultural site differed quite extensively. This was mainly due to the narrow data basis for agricultural sites.     

The performance of RAMS in representing the convective boundary layer structure in a very steep valley

Data from a comprehensive field study in the Riviera Valley of Southern Switzerland are used to investigate convective boundary layer structure in a steep valley and to evaluate wind and temperature fields, convective boundary layer height, and surface sensible heat fluxes as predicted by the mesoscale model RAMS. Current parameterizations of surface and boundary layer processes in RAMS, as well as in other mesoscale models, are based on scaling laws strictly valid only for flat topography and uniform land cover. Model evaluation is required to investigate whether this limits the applicability of RAMS in steep, inhomogeneous terrain. One clear-sky day with light synoptic winds is selected from the field study. Observed temperature structure across and along the valley is nearly homogeneous while wind structure is complex with a wind speed maximum on one side of the valley. Upvalley flows are not purely thermally driven and mechanical effects near the valley entrance also affect the wind structure. RAMS captured many of the observed boundary layer characteristics within the steep valley. The wind field, temperature structure, and convective boundary layer height in the valley are qualitatively simulated by RAMS, but the horizontal temperature structure across and along the valley is less homogeneous in the model than in the observations. The model reproduced the observed net radiation, except around sunset and sunrise when RAMS does not take into account the shadows cast by the surrounding topography. The observed sensible heat fluxes fall within the range of simulated values at grid points surrounding the measurement sites. Some of the scatter between observed and simulated turbulent sensible heat fluxes are due to sub-grid scale effects related to local topography.