Distribution of chromium contamination and microbial activity in soil aggregates

Biogeochemical transformations of redox-sensitive chemicals in soils can be strongly transport-controlled and localized. This was tested through experiments on chromium diffusion and reduction in soil aggregates that were exposed to chromate solutions. Reduction of soluble Cr(VI) to insoluble Cr(II) occurred only within the surface layer of aggregates with higher available organic carbon and higher microbial respiration. Sharply terminated Cr diffusion fronts develop when the reduction rate increases rapidly with depth. The final state of such aggregates consists of a Cr-contaminated exterior, and an uncontaminated core, each having different microbial community compositions and activity. Microbial activity was significantly higher in the more reducing soils, while total microbial biomass was similar in all of the soils. The small fraction of Cr(VI) remaining unreduced resides along external surfaces of aggregates, leaving it potentially available to future transport down the soil profile. Using the Thiele modulus, Cr(VI) reduction in soil aggregates is shown to be diffusion rate- and reaction rate-limited in anaerobic and aerobic aggregates, respectively. Thus, spatially resolved chemical and microbiological measurements are necessary within anaerobic soil aggregates to characterize and predict the fate of Cr contamination. Typical methods of soil sampling and analyses that average over redox gradients within aggregates can erase important biogeochemical spatial relations necessary for understanding these environments.     

MISSOURI RIVER FLOOD OF 1993: ROLE OF WOODY CORRIDOR WIDTH IN LEVEE PROTECTION1

ABSTRACT. We investigated the relationships between levee damage and woody corridor along a 353‐mile segment of the Missouri River in Missouri during the flood of 1993. Results indicated that woody corridors between riverbanks and primary levees played a significant role in the reduction or prevention of flood related damage to levees. Forty‐one percent of levee failures in this segment occurred in areas with no woody corridor, while 74 percent and 83 percent of failures occurred where woody corridor widths were less than 300 feet and less than 500 feet, respectively. Median failure lengths with a woody corridor present were 50.3 percent shorter than median failure lengths with no woody corridor present. Levees without failures had significantly wider median woody corridor widths than levees that failed. Eligibility for the Corps of Engineers levee maintenance program was not a significant factor in the reduction of levee damage. Discontinuities in woody corridors played a role in 27.5 percent of the levee failures in the study segment. Smaller segments of the river valley were studied to determine if geomorphic differences influenced variations in the protective value of woody corridors.     

Microbiological Monitoring of Marine Recreational Waters in Southern California

An inventory was conducted to assess the number, type, spatial distribution, and costs of microbiological monitoring programs in southern California marine waters from Point Conception to the US/Mexico International Border. The location of each sampling site was determined using global positioning system (GPS), and estimates of geographic coverage were determined using geographic information system (GIS) techniques. Twenty-one programs conducted 87,007 tests annually at 576 sites in the study area. The largest number of sites was sampled in Orange County, whereas the largest number of analyses was performed in Los Angeles County because monitoring programs in this area focused on daily monitoring. Fifteen of the 21 programs were managed by National Pollutant Discharge Elimination System (NPDES) permitted sewage effluent dischargers who sampled both offshore and shoreline waters and typically tested for three indicator bacteria (total coliform, fecal coliform, and enterococcus). Their combined efforts comprised 82% of all of the microbiological indicator analyses conducted on an annual basis. Five of the remaining monitoring organizations were public health agencies, which typically focus their efforts on testing only total coliforms. Laboratory methodology also varied considerably, with NPDES permittees predominantly utilizing membrane filtration while public health agencies generally used multiple tube fermentation or premanufactured test kits. Nearly three quarters of all the effort expended in southern California occurred along the shoreline as opposed to offshore locations. Two thirds of this shoreline effort was focused on high-use sandy beaches and in proximity to perennial freshwater outlets (storm drains and creeks). Most sampling occurred at a set of fixed sites that were revisited frequently, but only represented about 7% of the total shoreline. We estimated that roughly $3 million is spent annually on monitoring bathing water quality in southern California, exceeding that spent in any other part of the country.     

Estimating Hydraulic Properties of Volcanic Aquifers Using Constant‐Rate and Variable‐Rate Aquifer Tests1

Abstract: In recent years the ground‐water demand of the population of the island of Maui, Hawaii, has significantly increased. To ensure prudent management of the ground‐water resources, an improved understanding of ground‐water flow systems is needed. At present, large‐scale estimations of aquifer properties are lacking for Maui. Seven analytical methods using constant‐rate and variable‐rate withdrawals for single wells provide an estimate of hydraulic conductivity and transmissivity for 103 wells in central Maui. Methods based on constant‐rate tests, although not widely used on Maui, offer reasonable estimates. Step‐drawdown tests, which are more abundantly used than other tests, provide similar estimates as constant‐rate tests. A numerical model validates the suitability of analytical solutions for step‐drawdown tests and additionally provides an estimate of storage parameters. The results show that hydraulic conductivity is log‐normally distributed and that for dike‐free volcanic rocks it ranges over several orders of magnitude from 1 to 2,500 m/d. The arithmetic mean, geometric mean, and median values of hydraulic conductivity are respectively 520, 280, and 370 m/d for basalt and 80, 50, and 30 m/d for sediment. A geostatistical approach using ordinary kriging yields a prediction of hydraulic conductivity on a larger scale. Overall, the results are in agreement with values published for other Hawaiian islands.     

A Systemic Approach to Scoping of Factors Influencing More Sustainable Land Use in Herefordshire

Defining and putting into practice sustainable land use is a complex, systemic problem. Systems models and techniques were used in a study of Herefordshire to clarify the situation and identify the potential for a more locally focused, learning-based approach to land use. Issues included: (i) uncertainty about the boundary of a 'system of sustainable Herefordshire land use'; (ii) the complexity of economic flows in the county and the absence of some critical data; (iii) the importance of the Herefordshire landscape to tourism and the role of agriculture as a determinant of the state of that landscape; (iv) weakness of the institutional linkage between tourism and agriculture; (v) the current lack of inclusion of many relevant stakeholders in concerted action. Factors favouring a learning approach included a strong local identity, local food-related developments, and educational initiatives. Barriers to such an approach included questions of power and landholding, government policies, and attitudes and skills within organizations. These findings are considered in relation to the wider debate over approaches to sustainability.     

Modelling hydroenvironmental and health risk assessment parameters along the South Wales Coast

This paper highlights the increasing concerns relating to hydroenvironmetal issues and cites recent examples of the challenges now being regularly faced by hydroenvironmetal scientists and engineers. The limitations and restrictions of both physical (or laboratory) and numerical (or computer based) hydraulic models used in the planning and management of aquatic basins are discussed. General details are given of numerical models used for flow and water quality concentration predictions in estuarine waters, with particular application to the challenges occurring along the South Wales coast. A highly accurate and non-diffusive finite difference scheme that solves the transport equation for predicting water quality indicators and suspended sediment concentration distributions is also discussed. In particular, details are outlined of the extension of the water quality indicators of faecal coliforms, as required to comply with the EU Bathing Water Directive, to predict health risk assessment, in the form of predicting the risk of gastroenteritis. Three example research projects along the South Wales coast are described; the projects involve the application of two-dimensional and three-dimensional hydroenvironmetal models to predict flow patterns and water quality indicator organism distributions in the coastal receiving waters. These studies include: (i) a curvilinear finite difference approach to modelling flows in the Bristol Channel, (ii) coastal health risk predictions in Swansea Bay using combined water quality and epidemiological models, and (iii) combined sewer overflow discharges into Cardiff Bay.     

The ethics of Google Earth: crossing thresholds from spatial data to landscape visualisation

‘Virtual globe’ software systems such as Google Earth are growing rapidly in popularity as a way to visualise and share 3D environmental data. Scientists and environmental professionals, many of whom are new to 3D modeling and visual communications, are beginning routinely to use such techniques in their work. While the appeal of these techniques is evident, with unprecedented opportunities for public access to data and collaborative engagement over the web, are there nonetheless risks in their widespread usage when applied in areas of the public interest such as planning and policy-making?     

Estimation of biogenic emissions with satellite-derived land use and land cover data for air quality modeling of Houston-Galveston ozone nonattainment area

The Houston-Galveston Area (HGA) is one of the most severe ozone non-attainment regions in the US. To study the effectiveness of controlling anthropogenic emissions to mitigate regional ozone nonattainment problems, it is necessary to utilize adequate datasets describing the environmental conditions that influence the photochemical reactivity of the ambient atmosphere. Compared to the anthropogenic emissions from point and mobile sources, there are large uncertainties in the locations and amounts of biogenic emissions. For regional air quality modeling applications, biogenic emissions are not directly measured but are usually estimated with meteorological data such as photo-synthetically active solar radiation, surface temperature, land type, and vegetation database. In this paper, we characterize these meteorological input parameters and two different land use land cover datasets available for HGA: the conventional biogenic vegetation/land use data and satellite-derived high-resolution land cover data. We describe the procedures used for the estimation of biogenic emissions with the satellite derived land cover data and leaf mass density information. Air quality model simulations were performed using both the original and the new biogenic emissions estimates. The results showed that there were considerable uncertainties in biogenic emissions inputs. Subsequently, ozone predictions were affected up to 10 ppb, but the magnitudes and locations of peak ozone varied each day depending on the upwind or downwind positions of the biogenic emission sources relative to the anthropogenic NOx and VOC sources. Although the assessment had limitations such as heterogeneity in the spatial resolutions, the study highlighted the significance of biogenic emissions uncertainty on air quality predictions. However, the study did not allow extrapolation of the directional changes in air quality corresponding to the changes in LULC because the two datasets were based on vastly different LULC category definitions and uncertainties in the vegetation distributions.     

Water infrastructure and well-being among First Nations,Métis and Inuit individuals in Canada: what does the data tell us?

This paper documents the association between water and sanitation infrastructure and health indicators in Canada for First Nations, Métis and Inuit individuals living on and off-reserve in Canada. We use two data sources: the Aboriginal Peoples Survey and a survey conducted in a First Nations community in northern Manitoba—St. Theresa Point First Nation. We find statistically significant relationships between water infrastructure and health status in both sources of data. In particular, among individuals living off-reserve, contaminated water is associated with a 5–7% lower likelihood of reporting good self-rated health and a 4% higher probability of reporting a health condition or stomach problem. Those in St. Theresa Point First Nation without running water are four times more likely to report an illness relative to those with running water. Off-reserve, this likely suggests a need for improved public education on the management of private water supplies and more frequent water testing. Our case study suggests that further investment in water/sanitation infrastructure and housing is needed in the community.     

Mechanisms and chemistry of dye adsorption on manganese oxides-modified diatomite

The investigations into structural changes which occur during adsorbent modification and the adsorption mechanisms are essential for an effective design of adsorption systems. Manganese oxides were impregnated onto diatomite to form the type known as δ-birnessite. Initial investigations established the effectiveness of manganese oxides-modified diatomite (MOMD) to remove basic and reactive dyes from aqueous solution. The adsorption capacity of MOMD for methylene blue (MB), hydrolysed reactive black (RB) and hydrolysed reactive yellow (RY) was 320, 419, and 204 mg/g, respectively. Various analytical techniques were used to characterise the structure and the mechanisms of the dye adsorption process onto MOMD such as Fourier transform infrared (FTIR), X-ray diffraction (XRD) and atomic absorption spectrometry (A.A.). A small shift to higher values of the d-spacing of dye/MOMD was observed indicating that a small amount of the dye molecules were intercalated in the MOMD structure and other molecules were adsorbed on the external surface of MOMD. Two mechanisms of dye adsorption onto MOMD were proposed; intercalation of the dye in the octahedral layers and adsorption of the dye on the MOMD external surface. Moreover, the results demonstrated that the MOMD structure was changed upon insertion of MB and RY with an obvious decrease in the intensity of the second main peak of the MOMD X-ray pattern.