Spatial trends of organochlorinated pesticides,polychlorinated biphenyls,and polybrominated diphenyl ethers in Atlantic Anguillid eels

The bioaccumulation of lipophilic contaminants such as polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and polybrominated diphenyl ethers (PBDEs) can result in a reduction in fitness and spawner quality in eels and may be a factor in Anguillid sp. population declines. Contaminant concentrations in eels have been studied extensively in Europe, but data for American eels are severely lacking. Concentrations of PCBs, OCPs, and PBDEs were determined in American eel from eastern Canada and New York, USA, along with European eel from Belgium. Principal component analysis revealed that eels captured in the St. Lawrence estuary were a mixture of upstream migrants from the St. Lawrence River watershed, and fish captured in local tributaries. Contaminant concentrations were dependent on origin, related to the local environment, and were lower than historic values. In Canada, concentrations of OCPs and PCBs in eel tissues were below the Canadian human consumption guidelines for contaminants in fish, indicating that the current risk to consumers is low. However, concentrations of PCBs, total DDT, and mirex in eels from L. Ontario and the upper St. Lawrence R. were above Great Lakes guidelines for the protection of piscivorous predators. Concentrations of penta-BDE homologs exceeded the Canadian guideline for environmental quality in over half of the eels in this study, but concentrations of the other homolog groups were below the guideline.     

Cyanide generation during preservation of chlorinated wastewater effluent samples for total cyanide analysis.

Dechlorinating agents and pH adjustment are often used to preserve wastewater samples for cyanide analysis. The effects of four approved preservation protocols on the results of the total cyanide analysis of effluents from four water reclamation plants were examined. The results differed widely, and a clear pattern emerged. Immediate analysis without pH adjustment generally gave total cyanide concentrations below the reporting limit of 5 microg/L, irrespective of the dechlorinating agents used. When the pH was adjusted to > or =12, a slight increase in the measured total cyanide concentration was observed when thiosulfate was used to dechlorinate the samples, and a significant increase (>10 microg/L) was observed when arsenite was used as the dechlorinating agent. These results provide evidence that approved preservation protocols may give rise to cyanide formation in chlorinated wastewater effluent matrices.     

Characterisation of weathered hydrocarbon wastes at contaminated sites by GC-simulated distillation and nitrous oxide chemical ionisation GC-MS, with implications for bioremediation

An extended analytical characterisation of weathered hydrocarbons isolated from historically contaminated sites in Alberta is presented. The characterisation of soil extracts, chromatographically separated into component classes, by GC-simulated distillation and nitrous oxide (N2O) chemical ionisation (CI) GC-MS provides new insights into the composition of the residual oil at these sites, the principal partition medium for risk critical components. The combined polar and asphaltene content of representative soil extracts ranged from 40% w/w to 70% w/w of the oils encountered. An abundance of C14-C22 2-4 ring alicyclics, alkylbenzenes and benzocycloparaffins is prevalent within the saturate fractions of site soils. Implications for the partitioning of risk critical compounds at sites with weathered hydrocarbons and the practical application of bioremediation technologies are discussed.     

Thermal tolerance of early development in tropical and temperate sea urchins: inferences for the tropicalization of eastern Australia

The thermal envelope of development to the larval stage of two echinoids from eastern Australia was characterized to determine whether they fill their potential latitudinal ranges as indicated by tolerance limits. The tropical sand dollar, Arachnoides placenta, a species that is not known to have shifted its range, was investigated in Townsville, northern Australia (19°20′S, 146°77′E), during its autumn spawning season (May 2012). The subtropical/temperate sea urchin, Centrostephanus rodgersii, a species that has undergone poleward range expansion, was investigated in Sydney, southern Australia (33°58′S, 151°14′E), during its winter spawning season (August 2012). The thermal tolerance of development was determined in embryos and larvae reared at twelve temperatures. For A. placenta, the ambient water temperature near Townsville and experimental control were 24 °C and treatments ranged from 14 to 37 °C. For C. rodgersii, ambient Sydney water temperature and experimental control were 17 °C, and the treatment range was 9–31 °C. A. placenta had a broader developmental thermal envelope (14 °C range 17–31 °C) than C. rodgersii (9 °C range 13–22 °C). Both species developed successfully at temperatures well below ambient, suggesting that cooler water is not a barrier to poleward migration for either species. Both species presently live near the upper thermal limits for larval development, and future ocean warming could lead to contractions of their northern range limits. This study provides insights into the factors influencing the realized and potential distribution of planktonic life stages and changes to adult distribution in response to global change.     

运用卫星数据和来自国家森林清查的野外数据进行全国森林变量估计

瑞典约有55%的土地面积被森林所覆盖.目前,瑞典的森林覆盖没有统一的和地理学上明晰的描述.现存的独立性数据源是Landsat TM和SPOT HRV卫星数据、地图蒙片(map mask)和森林清查样地.它们在一起,使森林变量(如材枳和林分年龄)的计算机估计成为可能.这些估计的精确度在像素水平上是低的,但在林分水平上较高.在规划木材资源应如何加以利用或出于监测目的时,这类基于栅格的森林数据对政府来说是有帮助的.本文描述了以有效成本建立森林变量估计全国数据库的生成流程.我们在林分水平上评价了瑞典西南部某地森林变量估计的精确度.结果表明,总材积估计的整体均方根误差为33%,年龄估计的整体均方根误差为23%.     

In situ fixation of metals in soils using bauxite residue: chemical assessment

Contamination of soils with heavy metals and metalloids is a widespread problem all over the world. Low cost, non-invasive, in situ technologies are required for remediation processes. We investigated the efficiency of a bauxite residue (red mud) to fix heavy metals in two soils, one contaminated by industrial activities (French soil), and one by sewage sludge applications (UK soil). This Fe-oxide rich material was compared with lime, or beringite, a modified aluminosilicate that has been used for in situ fixation processes. Four different crop species were successively grown in pots. Metal concentrations in the soil pore waters were analyzed during the growing cycles. At the end of the experiment fluxes of heavy metals were measured using a diffusive gradient in thin film technique (DGT). Furthermore, a sequential extraction procedure (SEP) and an acidification test were performed to investigate the mechanisms of metal fixation by different soil amendments. In both soils, the concentrations of metals in the soil pore water and metal fluxes were greatly decreased by the amendments. An application of 2% red mud performed as well as beringite applied at 5%. Increasing soil pH was a common mechanism of action for all the amendments. However, the red mud amendment shifted metals from the exchangeable to the Fe-oxide fraction, and decreased acid extractability of metals. The results suggest that specific chemisorption, and possibly metal diffusion into oxide particles could also be the mechanisms responsible for the fixation of metals by red mud.     

Crude oil contaminated soil washing in air sparging assisted stirred tank reactor using biosurfactants

This study investigated the removal of crude oil from soil using air sparging assisted stirred tank reactors. Two surfactants (rhamnolipid and sodium dodecyl sulfate, SDS) were tested and the effects of different parameters (i.e. temperature, surfactant concentrations, washing time, volume/mass ratio) were investigated under varying washing modes namely, stirring only, air sparging only and the combination of stirring and air sparging. The results showed that SDS removed more than 80% crude oil from non-weathered soil samples, whilst rhamnolipid showed similar oil removal at the third and fourth levels of the parameters tested. The oil removal ability of the seawater prepared solutions were better than those of the distilled water solutions at the first and second levels of temperature and concentration of surfactant solutions. This approach of soil washing was noted to be effective in reducing the amount of oil in soil. Therefore we suggested that a field scale test be conducted to assess the efficiency of these surfactants.     

In situ fixation of metals in soils using bauxite residue: biological effects

Soils polluted with heavy metals can cause phytotoxicity and exhibit impared microbial activities. In this paper we evaluate the responses of different biological endpoints to in situ remediation processes. Three soil amendments (red mud, beringite and lime) were applied to two soils polluted by heavy metals. Oilseed rape, wheat, pea and lettuce were grown successively in pots on the untreated and amended soils and their yield and metal uptake were determined. A suite of microbial tests (lux-marked biosensors, Biolog and soil microbial biomass) were performed to determine the effect of the soil amendments on the functionality and size of the soil microbial community. In both soils all three amendments reduced phytotoxicity of heavy metals, enhanced plant yields and decreased the metal concentrations in plants. The red mud treatment also increased soil microbial biomass significantly. The microbial biosensors responded positively to the remediation treatments in the industrially-contaminated soil used in the experiment. Red mud applied at 2% of soil weight was as effective as beringite applied at 5%. The results also showed that since the biological systems tested respond differently to the alleviation of metal toxicity, a suite of biological assays should be used to assess soil remediation processes.