Application of the DPSIR framework to environmental degradation assessment in northern Ghana

In many communities in northern Ghana, the environment has been altered by complex natural and human driven forces with significant impact on the lives of their inhabitants. The need to formulate an improved, holistic and consistent methodological approach to assess the problem is critical for sustainable natural resource management. This paper examines the potential of the DPSIR environmental assessment framework utilizing GIS‐based participatory methodology in the assessment of environmental degradation in northern Ghana. Community truthing tools such as key informant interviews, focus group discussions, participant observation and participatory Geographical Information Systems (GIS) were employed as a means of soliciting societal responses integrated to conventional GIS spatial analysis to measure the indicators of the Driving force–Pressure–State–Impacts–Response (DPSIR) assessment framework. Post classification GIS imagery results show a marked natural vegetation decrease of 634 km2 (42%) of the study area with a corresponding increase of 600 km² (39%) of grasses and built‐up and barren environment in the period of 14 years from 1990 to 2004. This is attributed to extreme climatic conditions and human driven causes such as poverty, population growth, migration and land tenure system. Poverty reduction strategies, amendment of the Mining and Mineral Law (PNDC law 153), improvement of the existing land tenure system and the control of migrants and Fulani herdsmen from neighbouring Burkina Faso were some of the solutions selected by the research participants, to be emphasized in the National Environmental Action Plan (EPA Act 490). This paper concludes that the DPSIR environmental assessment framework is an effective means of organizing complex environmental information to facilitate policy decision making.     

Chronic exposure to gamma radiation of wild populations of meadow voles (Microtus pennsylvanicus)

Free-ranging, wild meadow voles (Microtus pennsylvanicus) were exposed to gamma radiation from a (137)Cs irradiator in a series of experiments conducted on six 1-ha meadows within a mixed deciduous forest in Manitoba, Canada. Over a period of 1-1.5 years in each of three experiments, vole populations were monitored with capture-mark-release techniques at nominal exposure rates of 200x, 9000x and 40,000x background. No effects on population or individual characteristics were detected up to the highest exposure rate (81 mGy/d). At this level, third generation voles were monitored up to a lifetime dose of about 5.7 Gy, at a measured dose rate of 44 mGy/d. Smaller numbers of overwintered animals survived and reproduced normally at doses up to 10 Gy. These results are discussed in terms of low-LET, external chronic radiation effects on rodents in the laboratory and the field, relative to current views on appropriate benchmarks for the protection of biota.     

Temporal Changes in Streamflow and Attribution of Changes to Climate and Landuse in Wisconsin Watersheds

Previous historic trends analyses on 21st Century hydrologic data in the United States generally focus on annual flow statistics and have continued to use USGS hydro‐climatic data network (HCDN) stations, although post‐1988 diversions and runoff regulations are not reflected in the HCDN. Using a more recent dataset, Geospatial Attributes of Gages for Evaluating Streamflow, version II (GAGES II), compiled by Falcone (2012), which includes more watersheds with reference conditions, a comprehensive analysis of changes in seasonal, and annual streamflow in Wisconsin watersheds is demonstrated. Given the pronounced influence of seasonal hydrology in Wisconsin watersheds, the objective of this study is to elucidate the nature of temporal (annual, seasonal, and monthly) changes in runoff. Considerable temporal and regional variability was found in annual and seasonal streamflow changes between the two historic periods 1951‐1980 and 1981‐2010 considered in the study. For example, the northern watersheds show relatively small changes in streamflow discharge ranging from ?6.0 to 4.2%, while the southern watersheds show relatively large increases in streamflow discharge ranging from 13.1 to 18.2%. To apportion streamflow changes to climate and nonclimatic factors, a method based on potential evapotranspiration changes is demonstrated. Results show that nonclimatic factors account for more than 60% of changes in annual runoff in Wisconsin watersheds considered in the study.     

Seasonal and Regional Patterns in Performance for a Baltic Sea Drainage Basin Hydrologic Model

This study evaluates the ability of the Catchment SIMulation (CSIM) hydrologic model to describe seasonal and regional variations in river discharge over the entire Baltic Sea drainage basin (BSDB) based on 31 years of monthly simulation from 1970 through 2000. To date, the model has been successfully applied to simulate annual fluxes of water from the catchments draining into the Baltic Sea. Here, we consider spatiotemporal bias in the distribution of monthly modeling errors across the BSDB since it could potentially reduce the fidelity of predictions and negatively affect the design and implementation of land‐management strategies. Within the period considered, the CSIM model accurately reproduced the annual flows across the BSDB; however, it tended to underpredict the proportion of discharge during high‐flow periods (i.e., spring months) and overpredict during the summer low flow periods. While the general overpredictions during summer periods are spread across all the subbasins of the BSDB, the underprediction during spring periods is seen largely in the northern regions. By implementing a genetic algorithm calibration procedure and/or seasonal parameterization of subsurface water flows for a subset of the catchments modeled, we demonstrate that it is possible to improve the model performance albeit at the cost of increased parameterization and potential loss of parsimony.     

Impacts of a nutrient trading plan on stream water quality in Sugar Creek,Ohio

In the early 2000s, a phosphorus nutrient trading plan (NTP) requiring best management practices (BMPs) to be installed as pollution abatement strategies to offset phosphorus waste from the Alpine Cheese Company was implemented in four subwatersheds of Sugar Creek in northeast Ohio. To assess the impacts of the Alpine NTP, 49 sites were sampled approximately biweekly from 2010 to 2018 for phosphate, total phosphorus, nitrate, ammonia, and total nitrogen. In addition, the Ohio Environmental Protection Agency conducted stream health surveys at 21 sites before and after the BMPs were implemented. This study evaluated the potential impact of 68 BMPs implemented under the NTP on the observed changes in nutrient concentrations and stream health indicators. Most nutrient concentrations observed during high discharge conditions showed significant declines from 2010 to 2018 for all subwatersheds, which was most likely due to BMPs that reduced erosion and surface runoff. However, there were fewer significant declines and some significant increases in nutrient levels during low discharge conditions, suggesting a possible contribution from legacy nutrient sources. Most sites reported increases in stream health indicators, but many streams are still below recommended levels. Collectively, the installation of BMPs and decreases in nutrient concentrations observed during high discharge conditions can be attributed to the NTP and likely contributed to improved stream health.     

Real-time PCR assay for detection and relative quantification of <Emphasis Type="Italic">Liocarcinus </Emphasis><Emphasis Type="Italic">depurator</Emphasis> larvae from plankton samples

Accurate species identification of decapod crustacean larvae is required to understand their population distributions, life cycle dynamics and interactions with their habitats. Analysis of plankton samples using morphological taxonomic methods and microscopy is time-consuming, requires highly skilled and trained operatives and may often be inaccurate. As complementary tools to classical identification methods, recent work has focused on the development of molecular approaches and shows their feasibility for species-specific identification. This study has developed real-time PCR assays utilising species-specific Taqman^® probes designed in the cytochrome oxidase I (COI) gene of Liocarcinus depurator, Necora puber, Carcinus maenas and Cancer pagurus. Our study then employed the probe and primers designed for L. depurator to obtain accurate identification and relative abundance estimates of L. depurator larvae in plankton samples collected between March 2005 and October 2006. Ranges of larval abundances were derived from a standard curve created from plankton samples spiked with a known number of larvae reared in the laboratory. Inhibition of the PCR reaction was shown to be an important factor and our results suggested that 0.1 ng of DNA as template provided accurate identification and avoided inhibition. Real-time PCR was shown to provide accurate species identification on unsorted plankton samples and could be suitable for the estimation of larval abundances in the plankton, although more work must be done to improve the accuracy of those estimations.     

Design of indicators for measuring product performance in the circular economy

Abstract

This paper explores measurement of product performance with respect to circular economy (CE) principles. Potential indicators are assessed with special attention given to questions such as: the variables that should be measured; how these variables should be assessed; and in which format they should be presented. The resulting considerations are used to develop a prototype whose design is informed through feedback from CE experts. The prototype uses a points-based questionnaire which converges into a simple final result with minimum and maximum limits. The selected approach is critically appraised, and its utility for decision-making discussed. The prototype is tested against a product in the chemical processing industry. The strengths include: ease of use; simplicity; speed; and an effective metaphor for the diffusion of CE principles. The limitations include: the opaque and potentially misleading nature of a single metric; superficial engagement with decision-making; and the reliance on context-specific assumptions. Future developments could include refining the approach to encourage deeper reflection, and generalisation of the approach to different industry sectors or sustainability frameworks.