Source profiles for industrial, mobile, and area sources in the Big Bend Regional Aerosol Visibility and Observational study

Representative PM2.5 and PM10 source emissions were sampled in Texas during the Big Bend Regional Aerosol Visibility and Observa (BRAVO) study. Chemical source profiles for elements, ions, and carbon fractions of 145 samples are reported for paved and unpaved road dust, soil dust, motor vehicle exhaust, vegetative burning, four coal-fired power stations, an oil refinery catalytic cracker, two cement kilns, and residential meat cooking. Several samples were taken from each emitter and source type, and these were averaged by source type, and in source subgroups based on commonality of chemical composition. The standard deviation represents the variability of the chemical mass fractions. BRAVO profiles differed in some respects from profiles measured elsewhere. High calcium abundances in geological dust, high selenium abundances in coal-fired power stations, and high antimony abundances in oil refinery catalytic cracker emissions were found. Abundances of eight thermally evolved carbon fractions [Atmos. Environ. 28 (15) (1994) 2493] differ among combustion sources, and a Monte Carlo simulation demonstrates that these differences are sufficient to differentiate among several carbon-emitters.     

Determinants of indoor and personal exposure to PM2.5 of indoor and outdoor origin during the RIOPA study

Effects of physical/environmental factors on fine particle (PM_2.5) exposure, outdoor-to-indoor transport and air exchange rate (AER) were examined. The fraction of ambient PM_2.5 found indoors (F_INF) and the fraction to which people are exposed (α) modify personal exposure to ambient PM_2.5. Because F_INF, α, and AER are infrequently measured, some have used air conditioning (AC) as a modifier of ambient PM_2.5 exposure. We found no single variable that was a good predictor of AER. About 50% and 40% of the variation in F_INF and α, respectively, was explained by AER and other activity variables. AER alone explained 36% and 24% of the variations in F_INF and α, respectively. Each other predictor, including Central AC Operation, accounted for less than 4% of the variation. This highlights the importance of AER measurements to predict F_INF and α. Evidence presented suggests that outdoor temperature and home ventilation features affect particle losses as well as AER, and the effects differ.Total personal exposures to PM_2.5 mass/species were reconstructed using personal activity and microenvironmental methods, and compared to direct personal measurement. Outdoor concentration was the dominant predictor of (partial R² = 30–70%) and the largest contributor to (20–90%) indoor and personal exposures for PM_2.5 mass and most species. Several activities had a dramatic impact on personal PM_2.5 mass/species exposures for the few study participants exposed to or engaged in them, including smoking and woodworking. Incorporating personal activities (in addition to outdoor PM_2.5) improved the predictive power of the personal activity model for PM_2.5 mass/species; more detailed information about personal activities and indoor sources is needed for further improvement (especially for Ca, K, OC). Adequate accounting for particle penetration and persistence indoors and for exposure to non-ambient sources could potentially increase the power of epidemiological analyses linking health effects to particulate exposures.     

The assessment of the energetic compound 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-Hexaazaisowurtzitane (CL-20) degradability in soil

CL-20 is a relatively new energetic compound with applications in explosive and propellant formulations. Currently, information about the fate of CL-20 in ecological systems is scarce. The aim of this study is to evaluate the biodegradability of CL-20 in soil environments. Four soils were used where initial CL-20 concentrations (above water solubility) ranged from 125 to 1500 mg of CL-20 per kg dry soil (corresponding to the concentrations derived from unexploded ordnance, low order detonation, or manufacturing spills). CL-20 appears to be biodegradable in soil under anaerobic conditions, and additions of organic substrates can substantially accelerate this process. However, CL-20 is not degraded in soil under aerobic conditions kept in the dark at temperatures up to 30 degrees C without organic amendments. Additions of starch or cellulose promote the biodegradation of CL-20 under aerobic conditions. Soil microbial community mediated biodegradation and plant uptake appears to enhance CL-20 biodegradation, the latter suggesting a possible route for CL-20 to entry in the food chain.     

Syndromes identified in fetuses with prenatally diagnosed cephaloceles

An evaluation of all fetuses from our institution with prenatally diagnosed cephaloceles was conducted to determine the frequency and spectrum of genetic syndromes associated with this abnormality. Review of the sonographic images, postnatal autopsy or pathology reports, delivery room records, paediatric neurosurgical findings, radiographs, and cytogenetic data were collected. Fifteen postnatally confirmed cases of prenatally diagnosed cephaloceles and two misdiagnosed cases were identified. Thirteen were midline occipital lesions, one was frontoparietal, and one was frontoethmoidal. Excluding microcephaly, hydrocephaly, and distortion of intracranial anatomy, 9 of 15 (60 per cent) had other associated anomalies, including two fetuses with aneuploidy. The prenatal diagnosis of a cephalocele should initiate a thorough search for other abnormalities. In this series, there were three multifactorial, two chromosomal, two sporadic, and two autosomal recessive syndromes identified. An accurate diagnosis is critical in determining the prognosis and providing appropriate genetic counselling.     

Real-world vehicle emissions: a summary of the twelfth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council (CRC) held its 12th workshop in April 2002, with nearly 90 presentations on the most recent on-road vehicle emissions research. This paper summarizes the presentations from researchers who are engaged in improving understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed mobile source emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emissions control programs, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

A Process investigation of realistic job previews: Mediating variables and channels of communication

A laboratory experiment was conducted to investigate the role of three possible mediating variables (job attitude, job knowledge, and job acceptance intention) to explain the effects of realistic job previews (RJPs) on entry-level outcomes. In addition, the effectiveness of an oral realistic job preview presented by an employment interviewer was compared to a written RJP. Sixty undergraduate student volunteers were randomly assigned to one of three conditions: (1) an oral RJP presented to job applicants by the employment interviewer during an employment interview; (2) a written RJP given to job applicants to read before an employment interview; and (3) a control condition in which job applicants received general job information from the interviewer during an employment interview. Results indicated that knowledge was an important mediator of RJP effects on several entry-level outcomes whereas attitude and job acceptance intention did not mediate RJP effects although both were strongly related to job acceptance decisions. In addition, the oral RJP was more effective than both the written RJP and general job information in creating positive preceptions of interviewer and organization honesty. Both the oral and the written RJP lowered subjects' job expectations and increased role clarity in comparison to the control group but did not affect job acceptance or commitment to job choice. The implications for future RJP research and application are discussed.     

The Impact of Scrubber Sludge on Ground Water Quality at an Abandoned Mine Site

A sulfate-rich flue gas desulfurization scrubber sludge was used as a substitute backfill material in reclamation of an abandoned coal strip mine. The site was surrounded by monitor wells and the material was characterized for leaching behavior using open column experiments. A drain was placed directly beneath the 45 000 ton fill to enable sampling before dilution or attenuation. The column studies indicated that the scrubber sludge would adsorb manganese, iron, aluminium, cobalt, nickel, thallium and zinc contaminants from the water. Changes in pH appear inadequate to explain the removal by precipitation. The groundwater cleaning phenomenon has been confirmed on a field scale by the drain samples. Boron and molybdenum leach from the fly ash was used to fix the scrubber sludge and serve as marker elements enabling calibration of the dispersivity in computer models of the groundwater system at the site. The leachate front appears to be diluted by a factor of 8 : 1 within the first 15 meters. Since boron and molybdenum release are associated only with the first flush, environmental impacts will be minimal. Columns appear to create a time compression effect on the duration of leaching phenomenon. The effect for this site appears to be at least 5 : 1. The columns were effective in predicting which elements would leach or adsorb in the field and in predicting the actual source concentrations. Other shake tests such as the TCLP and the ASTM shake test were found to be less effective at predicting which elements would leach and were not helpful in predicting field concentrations.     

Can level of safety climate predict level of orientation toward safety in a decision making task?

Establishing the relationship between level of safety climate and safety performance is a current challenge. This work examines the relationship between level of safety climate and orientation toward safety in the decision making process and choice. Alternatively, this work seeks to answer the question of whether level of safety climate can predict safety-oriented decision making. A generalized safety climate questionnaire and a decision making simulation are utilized to examine this relationship. The results indicate that level of safety climate is not a significant predictor of the decision process; however, it was found to be a significant predictor of the selection of safer choices.     

Odor-annoyance estimates from roadtraffic combustion exhausts: Calibration with master scaling using pyridine as a reference

The present field study addressed the need for a procedure that provides a defined unit of measurement of perceived annoyance from environmental odors, calibrating the estimates for individual scaling behavior and context effects. In including 25 subjects, the purpose was to demonstrate the applicability of the master-scale procedure with magnitude estimation to perform such a calibration of odor-annoyance estimates for target stimuli such as road-traffic combustion exhausts (13 000 vehicles/d; averaging 47 μg/m³ over the day/night with peaks exceeding 100 μg/m³ of nitrogen dioxide; NO₂). For comparison, calibrated estimates were also obtained for a backyard expected to be considerably less polluted (comparable with 18 μg/m³ of NO₂) and for blank stimuli presented indoors. The data transformation for the calibration procedure with which annoyance is expressed in either master-scale units or pyridine equivalents requires estimates of a reference stimulus for which seven concentrations of pyridine were used. The results provide an illustration of master scaling of odor annoyance, and imply that use of a modulus (standard stimulus with a predefined annoyance magnitude), in contrast to master scaling, is not sufficient for calibration for individual scaling behavior and context effects.     

Prediction of contaminant transport in fractured carbonate aquifer types: a case study of the Permian Magnesian Limestone Group (NE England,UK)

Viruses and bacteria which are characterized by finite lives in the subsurface are rapidly transported via fractures and cavities in fractured and karst aquifers. Here, we demonstrate how the coupling of a robust outcrop characterization and hydrogeophysical borehole testing is essential for prediction of contaminant velocities and hence wellhead protection areas. To show this, we use the dolostones of the Permian Magnesian Limestone aquifer in NE England, where we incorporated such information in a groundwater flow and particle tracking model. Within this aquifer, flow in relatively narrow (mechanical aperture of ~?10^?1–1 mm) fractures is coupled with that in pipe cavities (~?0.20-m diameter) following normal faults. Karstic cavities and narrow fractures are hydraulically very different. Thus, the solutional features are represented within the model by a pipe network (which accounts for turbulence) embedded within an equivalent porous medium representing Darcian flowing fractures. Incorporation of fault conduits in a groundwater model shows that they strongly influence particle tracking results. Despite this, away from faulted areas, the effective flow porosity of the equivalent porous medium remains a crucial parameter. Here, we recommend as most appropriate a relatively low value of effective porosity (of 2.8?×?10^?4) based on borehole hydrogeophysical testing. This contrasts with earlier studies using particle tracking analyses on analogous carbonate aquifers, which used much higher values of effective porosity, typically ~?10² times higher than our value, resulting in highly non-conservative estimates of aquifer vulnerability. Low values of effective flow porosities yield modelled flow velocities ranging from ~?100 up to ~?500 m/day in un-faulted areas. However, the high fracturing density and presence of karstic cavities yield modelled flow velocities up to ~?9000 m/day in fault zones. The combination of such flow velocities along particle traces results in 400-day particle traces up to 8-km length, implying the need for large well protection areas and high aquifer vulnerability to slowly degrading contaminants.