Emission of ammonia from indoor concrete wall and assessment of human exposure

Addition of urea-based antifreeze admixtures during cement mixing can make it possible to produce concrete cement in construction of buildings in cold weather; this, however, has led to increasing indoor air pollution due to continuous transformation and emission from urea to gaseous ammonia in indoor concrete wall. It is believed that ammonia is harmful to human body and exposure to ammonia can cause some serious symptoms such as headaches, burns, and even permanent damage to the eyes and lungs. In order to understand the emission of ammonia from indoor concrete wall in civil building and assess the health risk of people living in these buildings, the experimental pieces of concrete wall were first prepared by concreting cement and urea-based antifreeze admixtures to simulate the indoor wall in civil building in this work. Then environmental chamber was adopted for studying the effect of temperature, relative humility and air exchange rate on emission of ammonia from experimental pieces of concrete wall. Also the field experiment was made at selected rooms in given civil buildings. Exposure and potential dose of adult and children exposed to indoor/outdoor ammonia in summer and in winter are calculated and evaluated by using Scenario Evaluation Approach. The results indicated that high air exchange rate leads to decreased ammonia concentration, and elevation of temperature causes increasing ammonia concentration and volatilizing rate in chamber. The complete emission of ammonia from the wall containing urea-based antifreeze admixtures needs more than 10 years in general. Ventilating or improving air exchange can play a significant role in reducing ammonia concentration in actual rooms in field experiments. Urea-based antifreeze admixtures in concrete wall can give rise to high exposure and potential dose, especially in summer. Generally, adults have a high potential dose than children, while children have personal average dose rate beyond adults in the same conditions.     

Proposal for new best estimates of the soil-to-plant transfer factor of U,Th, Ra,Pb and Po

There is increasing interest in radiological assessment of discharges of naturally occurring radionuclides into the terrestrial environment. Such assessments require parameter values for the pathways considered in predictive models. An important pathway for human exposure is via ingestion of food crops and animal products. One of the key parameters in environmental assessment is therefore the soil-to-plant transfer factor to food and fodder crops. The objective of this study was to compile data, based on an extensive literature survey, concerning soil-to-plant transfer factors for uranium, thorium, radium, lead, and polonium. Transfer factor estimates were presented for major crop groups (Cereals, Leafy vegetables, Non-leafy vegetables, Root crops, Tubers, Fruits, Herbs, Pastures/grasses, Fodder), and also for some compartments within crop groups. Transfer factors were also calculated per soil group, as defined by their texture and organic matter content (Sand, Loam, Clay and Organic), and evaluation of transfer factors' dependency on specific soil characteristics was performed following regression analysis. The derived estimates were compared with estimates currently in use.     

Sulfate reduction in groundwater: characterization and applications for remediation

Sulfate is ubiquitous in groundwater, with both natural and anthropogenic sources. Sulfate reduction reactions play a significant role in mediating redox conditions and biogeochemical processes for subsurface systems. They also serve as the basis for innovative in situ methods for groundwater remediation. An overview of sulfate reduction in subsurface environments is provided, along with a brief discussion of characterization methods and applications for addressing acid mine drainage. We then focus on two innovative, in situ methods for remediating sulfate-contaminated groundwater, the use of zero-valent iron and the addition of electron-donor substrates. The advantages and limitations associated with the methods are discussed, with examples of prior applications.     

Optimum parameters for fault detection and diagnosis system of batch reaction using multiple neural networks

Batch process usually differs from the continuous process because of its time-varying variables and the process parameters. An early detection and isolation of faults in the process will help to reduce the process upsets and keep it safe and reliable. This paper discusses on the application of multi-layer perceptron neural network in detecting various faults in batch chemical reactor based on an esterification process that involves the reaction of ethanol and acetic acid catalyzed by sulfuric acid. A multi-layer feed forward neural network with double hidden layers has been used in the neural network architecture. The detection was based on the different patterns generated between normal and faulty conditions. An optimum network configuration was found when the network produced the minimal error with respect to the training, testing and data validation.     

Identification of Bacillus methylotrophicus and its application in preventing fly maggot production in the environment北大核心CSCD

This research aimed to screen Bacillus spp. to prevent the production of fly maggot on kitchen wastes from soil in the experimental bases of the South China Agricultural University. A nutrient-rich medium was used to isolate the Bacillus spp. with high temperature treatment. The seventeen Bacillus strains were obtained and assigned to three groups by using Insertion Sequence based PCR (IS-PCR) DNA fingerprinting patterns. The homology of the 16S rDNA gene was 100% between Group I and Bacillus methylotrophicus CBMB 205T, 99.61% between Group II and Bacillus aerophilus 28KT, and 99.87% between Group III and Bacillus cereus ATCC 14579T. The results of kitchen waste tests proved that the representative bacteria of Group I RF2 had the ability to prevent fly maggot production on kitchen wastes. Furthermore, the results of physiological and biochemical tests, carbon utilization tests, and antagonists against plant pathogen tests showed that the bacteria from Group I RF2 had the ability to decompose glucose into pyruvate and then decarboxylate pyruvate to diacetyl under alkaline conditions, convert ammonia to intracellular amino acids or other kinds of nitrogenous compounds, use many kinds of carbon source for self-growth, and be antagonistic against plant pathogenic rice sheath blight disease, banana fusarium wilt, and Fusarium oxysporum. Besides, the bacteria from RF2 could secret organic acids to dissolve insoluble phosphate [Ca3(PO4)2] for its own growth by decreasing the pH. Group I RF2 was a strong plant-promotion bacterium, and had good prospects of application for preventing fly maggot production on kitchen wastes. © 2018 Science Press. All rights reserved.     

Accumulation and partition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) in the muscle and liver of fish

The present study monitored fish from sites contaminated for many years, and the data reflected the results of actual, long-term environmental exposure. The sum concentrations and TEQs of PCDD/F in the muscle of common carp (Cyprinus carpio (linnaeus)) and big head (Aristichthys nobilis) from the different site of a heavily polluted lake in China are decreased with decrease of PCDD/F concentration in sediment and water. Concentration in fish can be highly variable, but the concentration is comparable in muscle between different species of fish if the concentrations are normalized by lipid content. PCDD/F accumulate in certain tissues with the highest proportions found in the liver of fish. The concentrations and TEQs in livers were also decreased with concentrations of sediments and water. The concentrations of PCDD/F in muscle are significantly correlated with those in liver. BCFs of 2,3,7,8-substituted PCDD/F calculated directly from water were consistent with that calculated indirectly from sediment. PCDD/F concentrations in sediment are much higher than that in water, therefore the measurement is much easier and the results are more accurate. Estimated BCFs for superhydrophobic chemicals derived from sediment may also serve as acceptable surrogates for "true" bioaccumulation potential.