Effect of inoculation in composting processes: modifications in lignocellulosic fraction

Three microbial isolates, identified as Bacillus shackletonni, Streptomyces thermovulgaris and Ureibacillus thermosphaericus were tested as inoculants in composting processes in relation to their capacity to improve lignocellulose degradation. Different wastes from agricultural activities were used as raw material for the heaps: pepper plant waste (PPW) as the main component and olive-oil mill waste (OMW), almond shell (AS), pruning waste (PW) and rice straw (RS) as additives. Cellulose was more extensively degraded than hemicellulose and lignin, although the use of inoculants (B. shackletonni and S. thermovulgaris) improved the action of the autochthonous microbiota just in the AS heaps. A higher efficiency was observed for lignin, since lower concentrations of this polymer were detected in the inoculated heaps in relation to control heaps. U. thermosphaericus was the most efficient microorganism since inoculation with this strain decreased the final lignin content in a range between 17.23% and 24.34%. S. thermovulgaris and B. shackletonni led to a higher reduction of the lignin levels in the OMW and PW heaps (14.25% and 19.07% less lignin than control heaps) and OMW (13%), respectively. The composting process can therefore be improved by means of inoculation if the microorganisms used for this purpose are appropriate for the characteristics of the raw material.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

Eco-efficiency in the SMEs of Venezuela. Current status and future perspectives

This paper presents a comparison analysis of eco-efficiency in the small and medium sized enterprises (SMEs) of Venezuela. The research can be divided into three parts: the first part reviews similar studies in the literature on the level of eco-efficiency exhibited by the companies of Venezuela and other countries. In the second place, the findings of a survey conducted on Venezuelan SMEs allowed the definition of 54 eco-efficiency profiles. Thirdly, six national experts in cleaner production and eco-efficiency were interviewed. The interview was based on a questionnaire similar to that used in the survey of the Venezuelan SMEs. At a second meeting, the experts were asked to discuss on the similarities and differences between their answers and those of the company's managers.The findings of the survey allow us to conclude that Venezuelan SMEs understand the legal environmental regulations that affect them but they do not perceive the influence of external driving forces like customers demand for green products or institutional incentives. The adoption of eco-efficiency practices is not perceived as an incentive to improve competitiveness so that the environmental strategies adopted generally aim at reducing costs or avoiding non-compliance sanctions and negative effects on the company image. Materials recycling and reuse, especially packaging materials, are common practices; however, other environmental tools or practices have not been implemented yet, e.g. environmental management systems (EMS), process, product and services design tools based on the product life cycle, renewable energy resources or green marketing. There are also differences among the eight industrial sectors analyzed, food and chemical industries having the higher index of eco-efficiency practices, and plastic and wood industries the lower.     

First fossil evidence of an “interglacial refugium” in the Pyrenean region

A refugium is generally understood as an area where temperate species survive cold periods, such as the Iberian, Italian, or Balkan Peninsulas in Europe. Strictly speaking, this definition refers to what is known as a glacial refugium. However, there are various types of lesser-known refugia such as the interglacial refugium, which denotes a mountainous region at low latitudes, such as the Pyrenees, where species adapted to the cold survive during interstadial periods. The small-vertebrate association from the sequence of Cova Colomera, which is located on the southern face of the Pyrenees and contains the final cold spell of the Late Pleistocene and the beginnings of the temperate period in which we currently find ourselves (the Holocene), could constitute the first fossil evidence of such an interglacial refugium, thus providing new paleoecological data on the phenomenon.     

The influence of FeCl3 on the photocatalytic degradation of dissolved azo dyes in aqueous TiO2 suspensions

The study concerned decolouration of solutions of azo, anionic (Acid Orange 7, Reactive Red 45, Acid Yellow 23) and cationic (Basic Blue 41 and Basic Orange 66) dyes during illumination with UV (lambdamax 366 nm) irradiation in the presence of TiO2 and FeCl3. The process of decolouration during illumination of the solutions studied containing FeCl3 underwent significant intensification in the case of anionic dyes and unfavourable inhibition in case of cationic dyes. It was also observed that FeCl3 had a diverse influence on the adsorption of the dyes studied on TiO2. The adsorption of anionic dyes and decolouration of solutions before the illumination was observed only in the presence of FeCl3. In case of cationic dyes the addition of FeCl3 caused elimination of these phenomena. An additional cause of decolouration of anionic dyes solutions before illumination was the precipitation of their poorly soluble compounds from Fe3+. The processes of degradation and mineralization of the dye that accompanied decolouration of Acid Orange 7 solutions were also observed. It was stated that similarly to the case of Acid Orange 7, the decolouration of the studied anionic dyes' solutions can depend on the concentration of FeCl3, the amount of TiO2 and the initial concentration of the dye in its solution.     

Dynamics of phosphorus and phytate-utilizing bacteria during aerobic degradation of dairy cattle dung

During organic wastes degradation, P is transformed which may affect its availability. In this study, the dynamics of P and the occurrence of phytate-utilizing bacteria (PUB) were evaluated during aerobic degradation of dairy cattle dung in laboratory-scale reactors for 105 d. The results showed an increase of water-soluble inorganic P (Pi) (from 570 to 1890 mg kg(-1)) and biomass P (from 390 to 870 mg kg(-1)) during the initial 40 d. After this period, water-soluble Pi remained constant (around 1500 mg kg(-1)) and biomass P decreased (around 220 mg kg(-1)) probably due to the decrease of easily available C in dung. Under the acidic conditions in the first 20 d there was an increase in concentration of Al (25 mg kg(-1)) and Fe (27 mg kg(-1)) ions. These ions were no longer detectable in the alkaline conditions occurring after 40 d. In the same period, the Ca concentration increased (from 1170 to 2370 mg kg(-1)) and chemical speciation revealed permanent association of Ca ions with Pi. Sequential P fractionation showed a decrease of organic P in NaHCO(3), NaOH and HCl fractions and an increase of residual P (25-52% with respect to total P). Analysis by (31)P NMR also showed a decrease (from 14% to 1.6%) of phytic acid content during final experimental period (60 and 105 d). The bacteriological analysis revealed various PUB involved in degradation of the dung. Two morphotypes, genetically characterized as Enterobacter and Rahnella, which were dominant under higher content of residual P, showed strong utilization of phytate in vitro.     

Analytical improvements of hybrid LC-MS/MS techniques for the efficient evaluation of emerging contaminants in river waters: a case study of the Henares River (Madrid, Spain)

Purpose  

Instrumental capabilities and software tools of modern hybrid mass spectrometry (MS) instruments such as high-resolution mass spectrometry (HRMS), quadrupole time-of-flight (QTOF), and quadrupole linear ion trap (QLIT) were experimentally investigated for the study of emerging contaminants in Henares River water samples.     

Polychlorinated biphenyls and their hydroxylated metabolites in placenta from Madrid mothers

Introduction  

Concentrations and congener profiles of polychlorinated biphenyls (PCBs) and their hydroxylated metabolites (OH-PCBs) in placenta samples from a Madrid population (Spain) are reported. Structure dependent retentions of OH-PCBs are known to occur in both humans and wildlife, making it of interest to assess placental transfer of both parent compounds and their metabolites to the developing foetus.     

Shell deformations in the Baltic clam Macoma balthica from southern Baltic Sea (the Gulf of Gdansk): hypotheses on environmental effects

High-resolution digital photography and graphical image analyses systems have been used to define external morphometric characters of shell deformations in four populations of the Baltic clam Macoma balthica from the Gulf of Gdansk (southern Baltic Sea). The proposed shell deformation indices (SDI), which were based on the relationship of selected dimensions in the posterior and the anterior part of the shell, showed at least three morphological features that provide a distinctive diagnosis of "regular" and "deformed" clams: the presence of flexure on the posterior side (SDI1), elongated posterior region (SDI2), and shell growth (SDI3). The degree and prevalence of deformed clams varied locally over space. Increase in percentage contribution of aberrated shells with depth, corresponding to oxygen depletion profile in the Gulf, suggests low oxygen concentrations as the main agent exerting a deforming influence. The observed morphological aberrations developed with age (size) of a bivalve, suggesting a long-term effect of causal factors, and were accompanied by lightening shell weight, possibly due to decalcification of previously deposited calcareous material during anaerobic metabolism. It is hypothesized that hypoxic/anoxic conditions and a subsequent presence of hydrogen sulfide on a deep organic-rich sea bottom induce shell form alterations that enable the pumping of oxygenated water from above the anoxic layer. Such a morphological modification highlights the functional significance of shell deformations in protective response to the ambient low-oxygen concentrations. Sediment organotin concentrations fall within moderate to high contamination range and, therefore, may also have an adverse impact on the shell form. DNA analyses of the fragment of mitochondrial gene cytochrome oxidase I (COI, 393 base pairs) showed homogenous genetic structure of regular and deformed clams, indicating that shell deformations in M. balthica are primarily driven by acclimatization to the ambient environmental conditions.