Optimizing vermistabilization of waste activated sludge using vermicompost as bulking material

An integrated composting-vermicomposting system has been developed for stabilization of waste activated sludge (WAS) using matured vermicompost as bulking material and Eisenia fetida as earthworm species. Composting was considered as the main processing unit and vermicomposting as polishing unit. The integrated system was optimized by successive recycling and mixing of bulking material with WAS during composting and examining the effects of environmental condition (i.e. temperature: 10-30 °C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m²) on vermicomposting. The composting stage resulted in sufficient enrichment of bulking material with organic matter after 20 cycles of recycling and mixing with WAS and produced materials acceptable for vermicomposting. Vermicomposting of composted material caused significant reduction in pH, volatile solids (VS), specific oxygen uptake rate (SOUR), total carbon (TC), total organic carbon (TOC), C/N ratio and pathogens and a substantial increase in electrical conductivity (EC), total nitrogen (TN) and total phosphorous (TP). The environmental conditions (i.e. temperature: 10-30 °C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m²) have profound effects on vermicomposting. Temperature of 20 °C with high humidity is the best suited environmental condition for vermicomposting employing E. fetida. The favorable stocking density range for vermiculture is 0.5-2.0 kg/m² (optimum: 0.5 kg/m²) and for vermicomposting is 2.0-4.0 kg/m² (optimum: 3.0 kg/m²), respectively. The integrated composting-vermicomposting system potentially stabilizes and converts the hazardous WAS into quality organic manure for agronomic applications without any adverse effects.     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

Chemical oxidation of C. I. Reactive Red 2 using Fenton-like reactions

A detailed investigation on the kinetics of the oxidative degradation of a reactive dye, C. I. Reactive Red 2 by hydroxyl radicals generated by H202 and Fe2+ has been carried out in aqueous acidic media. Effects of different parameters like initial concentration of dye, H2O2, Fe2+, pH of the solution, reaction temperature and added electrolytes on the oxidation process have been studied. The results indicate that 1.63 x 10(-4) mol dm(-3) dye can be most effectively degraded at a dye: Fe2+: H2O2 molar ratio of 1:0.22: 8.13 at pH approximately 2.7 and at 299 K. The addition of excess 2-propanol or t-butyl alcohol, well known scavengers of hydroxyl radicals, almost stopped the degradation of the dye indicating the absence of any possible reductive pathways in the degradation. The results may be useful for designing the treatment systems of wastewater containing various reactive dyes.