Methods for sampling and analysis of tropospheric ethanol in gaseous and aqueous phases

In this paper, we report on techniques for sampling and measuring ethanol in both the gas and aqueous phases of the lower troposphere. In the gas phase, the best sampling conditions were ensured by adsorption on Hayesep Q with a Chromosorb W AW coated with LiCl dryer (method 1) or by cryogenic trapping (method 2). An intercomparison campaign showed good agreement between both methods under various conditions. Method 1 (adsorption on Hayesep Q with dryer) is easier to set up and to carry away from the laboratory. Method 2 (cryogenic trapping) requires longer sampling time (up to 60 min while method 1 requires only 10-15 min). Method 1 is adapted to high concentrations of ethanol (>20 ppb) and low relative humidity (<30%). Method 2 gives more accurate results than method 1 for low ethanol concentrations (1-20 ppb). Comparing these results to previous studies, it is clear that sampling with appropriate solid adsorbents or with stainless steel canisters (with appropriate humidified air and short storage time) is adapted to urban or industrial environments where ethanol concentrations are high. Cryogenic sampling must be preferred for remote places where ethanol concentrations are low. Three techniques were tested for sampling ethanol in the liquid phase, namely solid phase microextraction, purge and trap injection, and direct injection. Among those, the latter was chosen for field measurements of ethanol in rain samples at an urban location. These first ever results at an urban location show concentrations ranging from <1 to 5 microM in rains, which agree with the expected range of concentrations. However, the purge and trap method showed detection limits that were 50 times lower and should be preferred for liquid phase ethanol measurements in rural and remote locations. Combining cryogenic trapping for the gas phase (method 2) and direct injection for the liquid phase is convenient and well adapted for a multiphase study of ethanol in the atmosphere, where simultaneous measurements in both phases are needed.     

Inclusion complexes of alpha- and gamma-cyclodextrins and the herbicide norflurazon: I. Preparation and characterisation. II. Enhanced solubilisation and removal from soils

The interaction of norflurazon with alpha- and gamma-cyclodextrins (CDs) yielded the formation of inclusion complexes at a 1:1 stoichiometric ratio in solution and in the solid state. Apparent stability constants of 50.7+/-1.6 and 37+/-1.7 M(-1) and an increase in herbicide solubility by up to five and fourfold for alpha- and gamma-CD, respectively, were determined from the phase solubility diagrams at 25 degrees C in water. Three processing methods (kneading, spray-drying and vacuum evaporation) were used to prepare norflurazon-CD solid inclusion complexes, which were characterised by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. A high increase in the norflurazon dissolution rate was obtained with all the solid complexes with gamma-CD, but when alpha-CD was used, only the solid system obtained after the vacuum evaporation process showed a higher dissolution rate. This finding is a first step in the development of new, environmentally sound formulations of norflurazon (NFL), due to the capacity for increasing its dissolution rate and hydrosolubility, and thus diminishing the use of organic solvents. On the other hand, the effect of alpha- and gamma-cyclodextrin on the solubility of norflurazon in solution was also considered as a way of modifying its behaviour in the soil environment. Desorption studies of NFL from soils in the presence of alpha- and gamma-cyclodextrin were carried out using a batch equilibration method. The results obtained showed that alpha- and gamma-cyclodextrin greatly increased the removal of norflurazon previously adsorbed, proving the potential use of these CDs for in situ remediation of pesticide-contaminated soils.     

Artificial sweat enhances dermal transfer of chlorpyrifos from treated nylon carpet fibers

The dermal transfer and absorption of 14C-ring-chlorpyrifos from nylon carpet fibers was measured in skin penetration-evaporation cells with excised pig skin. Prior to application, synthetic sweat was applied to skin in half of the cells. Radioactivity was measured in receptor fluid, dermis, epidermis, tape stripping samples, and vapor trap samples during a 24-h period. The sum of radiolabel recovered from the dermis and receptor fluid represented the absorbed dose. There was no significant difference (p > 0.05) in percutaneous absorption between cells that received the synthetic sweat application and "dry" cells (1.3 +/- 0.3% of applied dose). There was significantly more (p < 0.05) radiolabel recovered from tape stripping (5.4 +/- 2.1 vs. 2.8 +/- 0.6%) and in the epidermis (4.5 +/- 0.8 vs. 3.1 +/- 0.3%) from cells that received the synthetic sweat application, which indicated synthetic sweat facilitated transfer of chlorpyrifos from a treated substrate to the skin surface. The measured value for percutaneous absorption of chlorpyrifos agreed with the value predicted from an empirical model previously developed for nitro compound-containing soil.     

Methylmercury and total mercury in estuarine organisms from Rio de Janeiro, Brazil

Guanabara Bay (GB), located in the Rio de Janeiro State, is still a productive estuary on the south-eastern Brazilian coast. It is an ecosystem heavily impacted by organic matter, oil and a number of other toxic compounds, including Hg. The present study aimed to comparatively evaluate the aquatic total mercury (THg) and MeHg contamination, and the ratios of MeHg to THg (% MeHg), in 3 species of marine organisms, Micropogonias furnieri-carnivorous fish (N = 81), Mugil spp.--detritivorous fish (N = 20) and Perna perna--filter-feeding bivalves (N = 190), which are widely consumed by the population. A total of 291 specimens were collected at the bay in different periods between 1988 and 1998. THg concentrations were determined by cold vapour AAS with stannous chloride as a reducing agent. MeHg was extracted by dithizone-benzene and measured by GC-ECD. Analytical quality was checked through certified standards. All organisms presented both low THg and MeHg concentrations and they were below the maximum limit of 1,000 micrograms Hg.kg-1 wet wt. as established for human intake of predatory fish by the new Brazilian legislation. Carnivorous fish showed higher THg and MeHg concentrations, and also % MeHg in muscle tissues, than organisms with other feeding habits and lower trophic levels. The average of THg concentrations in carnivorous fish was 108.9 +/- 58.6 micrograms.kg-1 wet wt. (N = 61) in 1990 and 199.5 +/- 116.2 micrograms.kg-1 wet wt. (N = 20) in 1998, but they presented different total length and body weights. The average THg content in detritivorous fish was 15.4 +/- 5.8 micrograms.kg-1 wet wt., whereas THg concentrations ranged from 4.1 to 53.5 micrograms.kg-1 wet wt. for the molluscs. The THg and MeHg contents of mussel varied according to the sampling point and water quality. MeHg concentration in detritivorous fish was similar to MeHg concentration in molluscs, but there was a significant difference in the MeHg/THg ratio: the carnivorous fish presented higher MeHg percentages (98%) than the detritivorous fish (54%) and the molluscs (33%). Weight-normalised average concentration of THg in carnivorous fish collected in 1990 (0.18 +/- 0.08 microgram.g-1/0.7 kg wet wt.) and in 1998 (0.16 +/- 0.09 microgram.g-1/0.7 kg wet wt.) presented no significant difference (t = 1.34; P < 0.5). In conclusion, the low THg and MeHg concentrations in the organisms from the GB ecosystem, are related to its eutrophic conditions and elevated amounts of suspended matter. In this situation, Hg could be strongly complexed or adsorbed by the particulate, which would dilute the Hg inputs and reduce its residence time in the water column, with a consequent decrease in its availability to organisms.     

Genetic engineering in the improvement of plants for phytoremediation of metal polluted soils

Metal concentrations in soils are locally quite high, and are still increasing due to many human activities, leading to elevated risk for health and the environment. Phytoremediation may offer a viable solution to this problem, and the approach is gaining increasing interest. Improvement of plants by genetic engineering, i.e. by modifying characteristics like metal uptake, transport and accumulation as well as metal tolerance, opens up new possibilities for phytoremediation. So far, only a few cases have been reported where one or more of these characteristics have been successfully altered; e.g. mercuric ion reduction causing improved resistance and phytoextraction, and metallothionein causing enhanced cadmium tolerance. These, together with other approaches and potentially promising genes for transformation of target plants are discussed.     

Pesticides in rainfall in Europe

Papers and published reports investigating the presence of pesticides in rainfall in Europe were reviewed. Approximately half of the compounds that were analysed for were detected. For those detected, most concentrations were below about 100 ng/l, but larger concentrations, up to a few thousand nanograms per litre, were detected occasionally at most monitoring sites. The most frequently detected compounds were lindane (gamma-HCH) and its isomer (alpha-HCH), which were detected on 90-100% of sampling occasions at most of the sites where they were monitored. For compounds developed more recently, detection was usually limited to the spraying season. A classification of pesticides according to their deposition pattern is proposed.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Effect of isoflavones on reproductive performance, testosterone levels, lipid peroxidation, and seminal plasma biochemistry of male rabbits

The objective of this study was to determine the effect of either 2.5 mg/kg Body Weight or 5 mg/kg Body Weight (BW) doses of isoflavones on semen quality, testosterone levels, lipid peroxidation and semen biochemistry of male New Zealand White rabbits. Animals were given both 2.5 mg/kg BW and 5 mg/kg BW doses of isoflavones. The tested doses were given to rabbits orally every other day for 13 weeks. Treatment with isoflavones caused an increase (p < 0.05) in libido (by decreasing the reaction time), sperm concentration, sperm motility (%), total motile sperm per ejaculate (TMS), packed sperm volume (PSV), total functional sperm fraction (TFSF), total sperm output, initial fructose concentration and normal sperm, while dead sperm was reduced compared to control animals. On the other hand, ejaculate volume, initial hydrogen ion concentration (pH) and plasma testosterone levels did not change in treated animals with both doses of isoflavones as compared to control. Concentrations of thiobarbituric acid-reactive substances (TBARS), total lipids, and low density lipoprotein were significantly (p < 0.05) reduced in seminal plasma of rabbits treated with either 2.5 mg/kg BW or 5 mg/kg BW doses of isoflavones. While, the activities of glutathione S-transferase (GST), lactate dehydrogenase (LDH), aspartate aminotransferase (AST), alanine aminotransferase (ALT), acid phosphatase (AcP), and alkaline phosphatase (AlP) were significantly (p < 0.05) increased in seminal plasma of treated animals. Also, total cholesterol, percentage cholesterol (out of total lipids), and high density lipoprotein were significantly (p < 0.05) increased, while triglyceride did not change in seminal plasma of treated animals. Supplementation at either level of isoflavones did not cause changes in live body weight (LBW), dry matter intake (DMI), and relative weights of testes and epididymis. The present results showed that either 2.5 mg/kg BW or 5 mg/kg BW doses of isoflavones caused an improvement of some semen characteristics and did not have negative effects on male fertility.     

Atp-measurements in soil: A combination between the TCA and NRB ® extraction methods

The extraction of ATP from soils with the TCA- and NRB ®-methods shows qualitative and quantitative differences. A combination of both methods results in a higher yield of extracted ATP and in a solution of low optical quenching.