The use of δ(15)N signatures of translocated macroalgae to map coastal nutrient plumes: improving species selection and spatial analysis of metropolitan datasets

The definition of the spatial footprint of land-derived nutrient plumes is a key element to the design of initiatives to combat eutrophication in urbanised coastal regions. These plumes, however, are difficult to monitor because of their inherent high-frequency temporal and spatial variability. Biomonitoring with macroalgae provides time-integration of bioavailable nitrogen inputs through the measurement of δ(15)N signatures in tissues, and adequate spatial coverage through translocation to desirable monitoring locations. In this study, we used laboratory incubations to compare three different species of macroalgae as bioindicators, and a field experiment to investigate the applicability of the technique for the large-scale mapping of nutrient plumes. Cladophora valonioides was selected for the field experiment as it showed rapid changes in δ(15)N values in the laboratory incubations, was abundant in shallow depths making collection cost-efficient, and had tough thalli capable of withstanding deployment in open water. Ecklonia radiata also performed well in the laboratory incubations, but field harvest from subtidal depths was comparatively more expensive. Ulva lactuca had fragile thalli, and large nitrogen reserves that acted to mask the isotopic signal of newly acquired nitrogen. Cladophora valonioides was translocated to 246 sites covering an area of ～445 km(2) along the highly urbanized temperate coast of Adelaide, South Australia. The resulting isotopic signatures of nitrogen in tissues were spatially interpolated to produce maps of land-derived nutrient plumes, to model probability and standard error in the predictive surface, and to optimize sampling design.     

Post tsunami changes in soil properties of Andaman Islands, India

A post tsunami study was conducted to assess the changes in soil properties in the Andaman Island, in India. The present study reported tsunami led conversion of acid soils to saline acid soils and acid sodic soils to acid saline sodic soils in the areas South Andaman inundated during tsunami and permanently receded later and in the low-lying area submerged during high tides. Upon intense leaching acid saline soils and acid saline sodic may further develop typical characteristics of acidic soils and acidic sodic soil, respectively. The soil at Guptapara inundated almost due to tsunami with minimal pyrite oxidation has potential to develop into highly acidic soils upon drainage. The tsunami by and large has modified some depositional layer affecting the salt accumulation to a greater extent and iron to a lesser extent and least to sodicity.     

Development of Noise Simulation Model for Stationary and Mobile Sources: A GIS-Based Approach

In the rapidly urbanizing country like India, the transportation sector is growing rapidly, which lead to overcrowded roads producing air and noise pollution. Noise of a particular region is influenced by the volume of traffic on the highway, in addition to other causative factors like existing infrastructure and industrial setup etc. In the present paper, a geographical information system (GIS)-based noise simulation model has been developed to generate noise levels in Versova region of Mumbai, India. The study area comprises effect of infrastructure, road network, traffic volume, and various mechanical components like sewage pumping station and wastewater treatment facility. Various meteorological parameters and effect of land use and land cover on noise attenuation are also considered in the model. In this way, commutative noise prediction for point as well as mobile sources has been presented in the study. GIS-based noise simulation has been calibrated with observed noise levels during day and night time with correlation of 0.84 and 0.74, respectively.     

Study of chemical composition and morphology of airborne particles in Chandigarh, India using EDXRF and SEM techniques

The elemental composition and morphology of aerosols, collected from March 95 to February 96 and March 96 to August 96 respectively in the city of Chandigarh, India is determined using Energy Dispersive X-ray fluorescence and scanning electron microscopic techniques. The elemental concentration levels are found to be higher by a factor of 2-7 in the spring season as compared to the rainy season. The concentration of spherical and non-spherical (i.e. elongated) aerosols is more in the spring season and is reduced drastically in the rainy season due to the prominent wash out effect of rains. More accurate particle classification and source identification is obtained when based on combination of chemical composition and particle morphology. Possible sources identified from this analysis are soil dust, Industrial activity, Agricultural and Garbage burning, Maritime aerosols and Automobile exhaust.     

Water quality assessment of river Hindon at Ghaziabad, India: impact of industrial and urban wastewater

Spontaneous combustion on industrial-scale stockpiles causes environmental problems and economic losses for the companies consuming large amounts of coal. In this study, an effective monitoring and prediction system based on internet was developed and implemented to prevent losses and environmental problems. The system was performed in a coal stockpile with 5 m width, 10 m length, 3 m height, and having 120 t of weight. The inner temperature data of the stockpile was recorded by 17 temperature sensors placed inside the stockpile at certain points. Additionally, the data relating to the air temperature, air humidity, atmospheric pressure, wind velocity, and wind direction that are the parameters affecting the coal stockpile were also recorded. The recorded values were analyzed with artificial neural network and Statistical modeling methods for prediction of spontaneous combustion. Real-time measurement values and model outputs were published with a web page on internet. The internet-based system can also provide real-time monitoring (combustion alarms, system status) and tele-controlling (Parameter adjusting, system control) through internet exclusively with a standard web browser without the need of any additional software.     

Residual behavior and risk assessment of flubendiamide on tomato at different agro-climatic conditions in India

Supervised field trials were conducted at four different agro-climatic zones in India to evaluate the dissipation pattern and risk assessment of flubendiamide on tomato. Flubendiamide 480 SC was sprayed on tomato at 48 and 96 g active ingredient (a.i.) ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10, 15, and 20 days after treatment. Quantification of residues was done on a high-performance liquid chromatography (HPLC) device with a photo diode array detector. The limit of quantification (LOQ) of this method was found to be 0.01 mg kg^?1 while limit of detection (LOD) being 0.003 mg kg^?1. Residues of flubendiamide were found below the determination limit of 0.01 mg kg^?1 in 20 days at both the dosages in all the locations. The half-life of flubendiamide at an application rate of 48 g a.i.?ha^?1 varied from 0.33 to 3.28 days and at 48-g a.i. ranged from 1.21 to 3.00 days. On the basis of data generated under the All India Network Project on Pesticide Residues, a preharvest interval (PHI) of 1 day has been recommended, and the flubendiamide 480 SC has been registered for its use on tomato by the Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of flubendiamide on tomato has been fixed by the Ministry of Health and Family Welfare, Government of India under Food Safety Standard Authority of India, as 0.07 μg g^?1 after its risk assessment.     

Polycyclic aromatic hydrocarbons in some grounded coffee brands

Potentially toxic 16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in four brands of grounded coffee. Four to 13 PAHs were detected. Concentrations of total PAHs in different brands of coffee samples were in the range of 831.7–1,589.7 μg/kg. Benzo[a]pyrene (2A: probable human carcinogen) was found in Nescafe Premium whereas naphthalene (2B: possible human carcinogen) was found in all the samples of coffee.     

Acetamide hydrolyzing activity of Bacillus megaterium F-8 with bioremediation potential: Optimization of production and reaction conditions.

Bacillus megaterium F-8 exhibited an intracellular acetamide hydrolyzing activity (AHA) when cultivated in modified nutrient broth with 3 % tryptone, 1.5 % yeast extract, and 0.5 % sodium chloride, at pH 7.2, 45 °C for 24 h. Maximum AHA was recorded in the culture containing 0.1 M of sodium phosphate buffer, (pH 7.5) at 45 °C for 20 min with 0.2 % of acetonitrile and resting cells of B. megaterium F-8 equivalent to 0.2 ml culture broth. This activity was stable up to 55 °C and was completely inactivated at or above 60 °C. Maximum acyl transferase activity (ATA) was recorded in the reaction medium containing 0.1 M of potassium phosphate buffer, (pH 8.0) at 55 °C for 5 min with 0.85 mM of acetamide as acyl donor and hydroxylamine hydrochloride as acyl acceptor and resting cells of B. megaterium F-8 equivalent to 0.94 mg cells (dry weight basis). This activity was stable up to 60 °C and a rapid decline in enzyme activity was recorded above it. Under the optimized conditions, this organism hydrolyzed various nitriles and amides such as propionitrile, propionamide, caprolactam, acetamide, and acrylamide to corresponding acids. Acyl group transfer capability of this organism was used for the production of acetohydroxamic acid. ATA of B. megaterium F-8 showed broad substrate specificity such as for acetamide followed by propionamide, acrylamide, and lactamide. This amide hydrolyzing and amidotransferase activity of B. megaterium F-8 has potential applications in enzymatic synthesis of hydroxamic acids and bioremediation of nitriles and amides contaminated soil and water system.