纳米刻蚀法制备氧化锰介孔材料及其降解高含盐废水中罗丹明B

为了有效去除高含盐废水中的有机染料污染物,利用有序介孔硅材料作为模板剂,通过硬模板法制备了新型锰系氧化物（MnO_x）介孔材料作为类Fenton催化剂.催化剂的结构表征结果表明,模板剂在锰前驱物溶液中浸渍和后续煅烧成型过程决定了氧化锰介孔材料的结构.浸渍-煅烧成型重复次数越多,MnO_x介孔材料中孔道结构的有序度和氧化锰的结晶度越好.浸渍-煅烧成型次数过少,MnO_x介孔材料中孔道呈现无序状态,比表面积较大但氧化锰结晶度不足;次数过多则形成更为致密的小孔径的孔道结构,从而使MnO_x介孔材料的比表面积减小.由于对罗丹明B（RhB）良好的选择性吸附能力和较多的Mn³⁺/Mn⁴⁺对,具有有序规则孔道的氧化锰介孔材料具有优异的类Fenton催化活性,对高含盐废水中RhB的5 h降解去除率最高可达90%左右.     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.     

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Aluminum formate (AF), a degradable and non-corrosive coagulant, was synthesized from aluminum hydroxide and formic acid. Polyamidine (PA), as a coagulation aid, was combined with AF for dye wastewater treatment. AF was characterized by XPS, FT-IR, viscosity, zeta potential, mass spectrum and XRD, and the flocculation properties of the dual-coagulation system were characterized by FT-IR and SEM. The results showed that COOH, Al₂O₃-Al and O₂-Al bonds were formed in the AF synthesis process, and AF had a higher molecular weight and higher charge neutralization ability than PAC. The hydrolysates of AF were determined to contain Al₁₃ Al₁₁ and Al₂, and the components of AF were confirmed to comprise a mixture including aluminum formate (C₃H₃AlO₆) and its hydrate. When the color removal efficiency reached 100% in jar tests, the optimized dosage of AF/PA was 18.91/0.71 mg/L, while the optimized dosage of PAC/PA was 21.19/0.91 mg/L. According to the variance analysis, the interaction between AF/PA and PAC/PA were insignificant in macroscopic view. FT-IR spectrum indicated AF captured pollutant by means of CCO bond, PAC captured pollutant by δ CH, CC and δ CH. Overall, although the coagulation mechanism of AF was different from that of PAC, AF/PA showed better coagulation efficiency than PAC/PA in dye wastewater treatment.     

外循环厌氧反应器的工艺特征与运行性能研究

将UASB反应器多点进水装置进行改造,设计独特的变速旋流配水装置,具有配水均匀,混合效果好,不会产生短流的特点。研究结果表明,旋流配水装置容积利用率高,外循环能耗小,布水均匀性良好;中温条件下外循环反应器处理模拟啤酒配水,进水COD浓度为2000mg／L～3000mg／L,容积负荷可以达到22．7kgCOD／m^3·d,COD去除率最高可达92．46％。     

甜菜制糖生产废水处理技术研究

甜菜制糖工业废水由于其流量大、有机物浓度高、且季节性生产的特点,使得污水处理工艺难以按照常规方式进行。本研究选择适合北方地区特点、运行费用低、再启动快捷的水解-好氧-化学氧化-混凝沉淀的处理工艺,将生化与物化方法相结合,最后达到理想的效果,也为同类型工业污水的处理提供参考经验。     

小城镇污水处理厂升级改造技术分析

随着城镇化进程加快,经济快速发展的同时严重的环境污染问题随之出现,主要表现在小城镇污水处理率较低,各地区发展不平衡等方面。因此对小城镇的污水处理厂的升级改造势在必行。根据小城镇工业污水的特征及处理要求,提出了几种易于在小城镇推广的经济、高效、节能和简便易行的污水处理改造工艺。针对江阴市小城镇污水集中处理水质特点及工艺的进行研究,根据新的排放标准,提出与改造相应的技术组合思考,达到进一步改善小城镇污水处理效率的目的。     

FIA技术在水质监测分析中的应用

通过使用Lachat流动注射分析仪测定环境水样中的四个常规项目总磷、总氮、挥发酚和总氰来介绍兀A技术在水质分析领域的应用。实验结果表明,各项目的标样测定值均在保证值范围之内,相对标准偏差在0．2％-3．7％之间。方法的精密度及准确度较好,加标回收率在91％-102％之间,满足水质监测实验室质量控制的要求。     

中俄跨界水体水质联合监测长期合作若干问题的思考

文章在概要阐述中俄联合监测实验内容与经过之后,提出了下一步中俄联合监测在双方统一评价标准、监测分析方法的设想。同时提出今后扩大中俄双方联合监测方面的技术交流和新的合作方式的构想。     

厌氧膨胀颗粒床（EGSB）反应器在有机废水治理中的研究进展

厌氧膨胀颗粒床（EGSB）反应器作为第三代高效厌氧反应器代表工艺之一,它通过增大反应器的高径比和采用出水回流技术,使反应器内的水力上升流速远远高于UASB反应器,强化了传质效果,提高了处理效率。适用于超高浓度和含有毒物质的工业废水,也特别适用于低温低浓度有机废水的处理。还展望了EGSB反应器未来的发展前景。     

复合混凝剂用于夏季太湖水混凝脱浊研究

用特征粘度系列化的聚二甲基二烯丙基氯化铵(PDM)与聚合氯化铝(PAC)复合得到稳定的复合混凝剂,用于夏季高藻太湖水强化混凝脱浊处理.通过混凝烧杯实验.考察了无机/有机复合比例、PDM特征粘度对脱浊效果及絮团沉淀性能的影响.结果表明,对浊度为30-33 NTU,温度为28～30℃,藻含量为2.6×107个儿的太湖水,在与某市水厂混凝强度相近的搅拌强度下.当达到该水厂2NTU沉淀池出水的余浊标准时,PAC需7.00 mg/L的投加量.质量复合比例为5:1、10:1、20:1的PAC(以Al2O3计)/PDM复合混凝剂所需PAC投加量随PDM特征粘度0.52、1.53、2.46 dL/g的增加分别为3.00-2.83 ms/L、3.50-3.49ms/L、5.37-4.67 mg/L,相对于PAC减少投加量57.14%-59.57%、50%-50.14%、23.29%-33.29%;作为深度处理的技术准备.当沉淀出水浊度要求提高至1NTU的情况下,复合药剂依然可发挥好的作用,PAC需10 mg/L的投加量,PAC(以Al2O3计)与PDM质量复合配比为20:1、10:1、5:1的复合混凝剂需8.33-3.91 mg/L的投加量,能比PAC减少投加量16.7%～60.9%.可见,PDM明显提高了PAC的混凝脱浊效果与沉淀性能,且PAC/PDM质量复合配比越低,PDM特征粘度越高,脱浊效果与沉淀性能越好.