Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Effects of humic acid on phytodegradation of petroleum hydrocarbons in soil simultaneously contaminated with heavy metals

Effects of humic acid on phytoremediation of petroleum hydrocarbons in soil simultaneously contaminated with heavy metals were evaluated.     

Investigation of heavy metal accumulation in Polygonum thunbergii for phytoextraction

In this study, cadmium (II), lead (II), copper (II) and zinc (II) were determined in Polygonum thunbergii and soil from the Mankyung River watershed, Korea. Soil samples contained detectable lead (<17.5 g g(-1)), copper (<8.4 g g(-1)) and zinc (<24.5 g g(-1)), whereas cadmium was undetectable. Whole plants of P. thunbergii contained detectable lead (<320.8 g g(-1)), copper (<863.2 g g(-1)) and zinc (<2427.3 g g(-1)), whereas cadmium was detectable only in the stem (<7.4 g g(-1)) and root (<10.1 g g(-1)). Whole plant concentrations were very different for each metal, particularly in the case of zinc. The mean content of heavy metal in the whole plants increased in the order of cadmium (8.5 g g(-1))相似文献   

Characterization and reactivity of natural manganese ore catalysts in the selective catalytic oxidation of ammonia to nitrogen

Natural manganese ore (NMO) catalysts were characterized and tested in the selective catalytic oxidation of ammonia to nitrogen oxides under dilute conditions. Also, the oxidation of ammonia (NH(3)) was carried out using pure MnO(2), Mn(2)O(3) for comparing with the activity. It is found that the activity of NMO was similar to that of MnO(2) at low temperature below 150 degrees C but above this temperature, the activity of these catalysts showed the difference. In the course of NH(3) oxidation, N(2), NO, N(2)O and H(2)O were produced. But the quantity of NO(2) produced in this experiment was negligible. At temperature below 250 degrees C, selectivity into N(2) from NH(3) oxidation was in the order, NMO > MnO(2) > Mn(2)O(3). This is the reverse of activity of these manganese oxides. Also the characterization of NH(3) oxidation was proposed and supported by the effect of space velocity, inlet O(2) and NH(3) concentration. The increase of space velocity remarkably influenced not only the conversion but also selectivity into N(2). The higher the reaction temperature was, the higher the effect of inlet O(2) and NH(3) concentration on the reaction rate was. By introducing NO during NH(3) oxidation reaction, the possibility of NMO as selective catalytic reduction catalyst at low temperature was studied and showed positive results.     

Persistent organochlorine residues in northern fur seal from the Pacific coast of Japan since 1971

The present study was conducted to determine the residue levels of persistent organochlorines such as PCB homologues, DDT and its metabolites, and HCH isomers in the ventral blubber of female northern fur seal (Callorhinus ursinus) collected off Sanriku, the Pacific coast of northern Japan, since 1971. Among the organochlorines examined, the concentrations of PCBs and DDTs were found to be high in all samples. The residue levels of these two contaminants showed a drastic reduction following maturity and then a slight increase after the retirement from pregnancy/menopause. Temporal variation of PCB and DDT residues showed maximum levels around 1976 and then decreased, whereas HCH residue levels revealed a very slow declining pattern. Considering the concentrations and compositions of the residues, the northern fur seal is likely to be exposed to organochlorine contamination deriving from global terms. In this context, continuous contamination has been foreseen with regard to PCB and HCH residues. The pattern of organochlorine residues indicated that the northern fur seal has higher metabolic capacity than Dall's porpoise, while it is comparable to those of larga seal and Steller sea lion.     

Behavior of particulate matter during high concentration episodes in Seoul

The behavior of particulate matter (PM) during high-concentration episodes was investigated using monitoring data from Guui station, a comprehensive air monitoring station in Seoul, Korea, from January 2008 to March 2010. Five non-Asian dust (ND) episodes and two Asian dust (AD) episodes of high PM concentrations were selected for the study. During the ND episode, primary air pollutants accumulated due to low wind speeds, and PM_2.5 increased along with most other air pollutants. Particles larger than PM_2.5 were also high since these particles were generated by vehicular traffic rather than wind erosion. During strong AD episodes, PM_10–2.5 primarily increased and gaseous primary air pollutants decreased under high wind speeds. However, even during the AD episode, PM_2.5 and gaseous primary air pollutants increased when the effects of AD were weak and wind speeds were low. This study corroborates that accumulation of air pollutants due to a drop in surface wind speed plays an important role in short-term high-concentration occurrences. However, low wind speeds could not be directly linked to local emissions because a significant portion of accumulated air pollutants resulted from long-range transport.     

Evaluation of a Three‐Dimensional Hydrodynamic Model Applied to Chesapeake Bay Through Long‐Term Simulation of Transport Processes

A numerical model, the Curvilinear Hydrodynamics in 3‐Dimensions, Waterway Experiment Station version (CH3D‐WES), was applied to represent transport processes of the Chesapeake Bay. Grid resolution and spatial coverage, tied with realistic bathymetry, ensured dynamic responses along the channel and near the shoreline. The model was run with the forcing ranges from high frequency astronomical tides to lower frequency meteorological forcing, given by surface wind and heat flux, as well as hydrological forcing given by fresh water inflows both from upstream and distributed sources along the shoreline. To validate the model, a long‐term simulation over seven‐year time period between 1994 and 2000 was performed. The model results were compared with existing observation data including water level time series, which spans over a wide spectrum of time scales, and long‐term variations in salinity structures over varying parts of the Bay. The validated model is set to provide an appropriate transport mechanism to the water quality model through linkage, warranting that the model takes into account the complexity in time and spatial scales associated with the dynamic processes in the Chesapeake.     

Evaluation of Hook Handles in a Pulling Task

To evaluate the effect of handle design characteristics on subjective ratings and pulling forces, meat-hook handles with various handle shapes, sizes, and hook positions were tested in a pulling task. Finger and phalange force data measured by force sensitive resistors and subjective ratings of discomfort were also evaluated. Generally subjects preferred 37-mm double frustum, 30-mm oval handles followed by 30-mm double frustum handles, 37-mm oval, and 45-mm double frustum handles. In the analyses of total pulling force, 37- and 45-mm double frustum handles showed less required pulling force than the others. The averages of finger force contributions to the total pulling force were 27.2, 28.1, 23.9, and 20.8% in order from index to little fingers. The average of phalange force contributions were 28.8, 33.6, and 37.6% for the distal, middle, and proximal phalanges, respectively. The findings illustrate that the pulling finger forces and subjective discomfort ratings were related to the handle shape as well as handle size.