Practical field application of a novel BOD monitoring system

A biochemical oxygen demand (BOD) monitoring system, based on electrochemically-active bacteria in combination with a microbial fuel cell, has been developed for the purpose of on-site, on-line and real-time monitoring of practical wastewater. A microbial fuel cell that had been enriched with electrochemically-active bacteria was used as the basis of the measurement system. When synthetic wastewater was fed to the system, the current generation pattern and its Coulombic yield were found to be dependent on the BOD5 of the synthetic wastewater. A linear correlation between the Coulombic yields and the BOD5 of the synthetic wastewater were established. Real wastewater obtained from a sewage treatment plant also produced a highly linear correlation between the Coulombic yield and BOD5 in the system. To examine on-site, on-line and real-time monitoring capability, the BOD monitoring system was installed at a sewage treatment plant. Over 60 days, the measurement system was successfully operated with high accuracy and good stability with the measuring period for a sample being 45 min. This application showed that the application of the measurement system was a rapid and practical way for the determination of BOD5 in water industries.     

Forest-based biomass supply potential and economics for the pellet production in Nepal

In the current study, the potential of forest-based biomass supply for the pellet production in Nepal is investigated. This study showed that about 2.76 million tonnes (Mt) biomass in the form of pellets are potentially available from forest-based biomass. Considering a processing capacity of 6 tonnes (t)/hr of a pellet plant, the production cost of the pellets was calculated to be $43.53/t. Pellets are generally used as fuel to produce thermal energy in industries, which helps to save the economy and the environment of the country.     

The effect of suspended particles coated by humic acid on the toxicity of pharmaceuticals, estrogens, and phenolic compounds

The sorption characteristics of 10 organic chemicals, categorized as pharmaceuticals, estrogens and phenols, onto synthetic suspended particle (i.e., alumina) coated with humic acid were investigated according to their octanol-water partition coefficient (K(ow)). Chemical analyses were performed with gas chromatography and mass spectrometry (GC/MS) and high performance liquid chromatography (HPLC). The effects of particles on the toxicity reduction were evaluated using bioassay tests, using Daphnia magna and Vibrio fisheri for phenols and pharmaceuticals, and the human breast cancer cell MCF-7 for estrogens. Sorption studies revealed that 22 and 38% of octylphenol and pentachlorophenol, respectively, were removed by suspended particle, whereas 2,4-dichlorophenol was not removed, which was directly proportional to the logK(ow) value. Similar to the sorption tests, suspended particles significantly reduced the acute toxicities of octylphenol and pentachlorophenol to D. magna and V. fisheri (p<0.01), but there was no significant difference in the toxicity of 2,4-dichlorophenol to D. magna (p=0.8374). Pharmaceuticals, such as ibuprofen, gemfibrozil and tolfenamic acid, showed no discernible sorption to the suspended particle, with the exception of diclofenac, which revealed 11% sorption. For estrogens, such as estrone, 17beta-estradiol and 17alpha-ethynylestradiol, the results indicated no reduction in the sorption test. This may be attributed to the polar interaction by functional groups in sorption between pharmaceuticals and estrogens and suspended particles. In the bioassays, presence of suspended particles did not significantly modify the toxicity of pharmaceuticals (regardless of their K(ow) values) to D. magna, V. fisheri or E-screen.     

Assessment of natural and calcined starfish for the amelioration of acidic soil

Quality improvement of acidic soil (with an initial pH of approximately 4.5) with respect to soil pH, exchangeable cations, organic matter content, and maize growth was attempted using natural (NSF) and calcined starfish (CSF). Acidic soil was amended with NSF and CSF in the range of 1 to 10 wt.% to improve soil pH, organic matter content, and exchangeable cations. Following the treatment, the soil pH was monitored for periods up to 3 months. The exchangeable cations were measured after 1 month of curing. After a curing period of 1 month, the maize growth experiment was performed with selected treated samples to evaluate the effectiveness of the treatment. The results show that 1 wt.% of NSF and CSF (700 and 900 °C) were required to increase the soil pH to a value higher than 7. In the case of CSF (900 °C), 1 wt.% was sufficient to increase the soil pH value to 9 due to the strong alkalinity in the treatment. No significant changes in soil pHs were observed after 7 days of curing and up to 3 months of curing. Upon treatment, the cation exchange capacity values significantly increased as compared to the untreated samples. The organic content of the samples increased upon NSF treatment, but it remains virtually unchanged upon CSF treatment. Maize growth was greater in the treated samples rather than the untreated samples, except for the samples treated with 1 and 3 wt.% CSF (900 °C), where maize growth was limited due to strong alkalinity. This indicates that the amelioration of acidic soil using natural and calcined starfish is beneficial for plant growth as long as the application rate does not produce alkaline conditions outside the optimal pH range for maize growth.     

Effect of chemical amendments on remediation of potentially toxic trace elements (PTEs) and soil quality improvement in paddy fields

Remediation of potentially toxic trace elements (PTEs) in paddy fields is fundamental for crop safety. In situ application of chemical amendments has been widely adapted because of its cost-effectiveness and environmental safety. The main purpose of this research was to (1) evaluate the reduction in dissolved concentrations of cadmium (Cd) and arsenic (As) with the application of chemical amendments and (2) monitor microbial activity in the soil to determine the remediation efficiency. Three different chemical amendments, lime stone, steel slag, and acid mine drainage sludge, were applied to paddy fields, and rice (Oryza sativa L. Milyang 23) was cultivated. The application of chemical amendments immobilized both Cd and As in soil. Between the two PTEs, As reduction was significant (p < 0.05) with the addition of chemical amendments, whereas no significant reduction was observed for Cd than that for the control. Among six soil-related variables, PTE concentration showed a negative correlation with soil pH (r = ?0.70 for As and r = ?0.54 for Cd) and soil respiration (SR) (r = ?0.88 for As and r = ?0.45 for Cd). This result indicated that immobilization of PTEs in soil is dependent on soil pH and reduces PTE toxicity. Overall, the application of chemical amendments could be utilized for decreasing PTE (As and Cd) bioavailability and increasing microbial activity in the soil.     

Vegetation roles on changes of soil properties and microbial activities in a coastal sand dune. A case study

The vegetation effects on changes of soil physicochemical properties and microbial activities in the costal sand dune were investigated to understand the roles of vegetation on sand dune ecosystem. Eight sites from six vegetation zones and two bare zones in the dune front, dune crest, and dune back regions were selected. Soil microbial enzyme activities of β-glucosidase, acid phosphatase, arylsulfatase, and dehydrogenase, and soil physicochemical properties of each site were evaluated. The results showed that all the enzyme activities were higher in the mixed vegetation sites with native sand dune plants and naturalized plants and in Pinus thunbergii community site both located in the dune back regions where the accumulation of organic matter and nitrogen were more prominent. The results demonstrated that soil organic matter and nutrients are the primary determinants of the microbial activity in sand dune where are exposed to a gradient of physicochemical stress such as high salinity, moisture and salt spray. Therefore, the conservation of vegetation that generates more soil organic matter and nutrients is important factor in controlling the soil microbial activities and biogeochemical cycles in the coastal sand dune systems.     

Optimizing Agricultural Best Management Practices in a Lake Erie Watershed

Implementing agricultural best management practices (BMPs) is influenced by a balance of desired environmental outcomes, economic feasibility, and stakeholder familiarity, the latter taken to be related to BMP acceptability. To explore this balance, we developed a multi‐objective decision support system for allocating BMP type and placement by coupling the Soil and Water Assessment Tool with a nondominated sorted genetic algorithm that minimizes total phosphorus (TP) yields from agricultural hydrologic response units (HRUs) and costs, while using stakeholder BMP familiarity as a constraint; conventional tillage, no tillage, nutrient management, riparian buffers, and contour cropping were explored. Using constraints representing current conditions, the optimization resulted in 59.6 to 81.0% reduction in agricultural TP yield from HRUs at costs ranging between US $0.8 and US $5.3 million. The constrained optimization tended to select mostly single BMPs or at most two BMPs for a given HRU due to these BMPs having higher acceptability to stakeholders. In contrast, the unconstrained case, representing full familiarity, selected 2‐ and 3‐BMP applications. There was little difference in costs between the constrained and unconstrained cases below an 80% TP yield reduction; however, significant differences were found at larger reductions, supporting the value of stakeholder education and extension efforts. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Selective Leaching of Valuable Metals from Waste Printed Circuit Boards

Abstract

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H₂SO₄ and 0.2 M H₂O₂ at 85 °C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 °C with a leaching solution of 0.2 M (NH₄)₂S₂O₃, 0.02 M CuSO₄, and 0.4 M NH₄OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.     

A wind tunnel test of newly developed personal bioaerosol samplers

In this study the performance of two newly developed personal bioaerosol samplers was evaluated. The two test samplers are cyclone-based personal samplers that incorporate a recirculating liquid film. The performance evaluations focused on the physical efficiencies that a personal bioaerosol sampler could provide, including aspiration, collection, and capture efficiencies. The evaluation tests were carried out in a wind tunnel, and the test personal samplers were mounted on the chest of a full-size manikin placed in the test chamber of the wind tunnel. Monodisperse fluorescent aerosols ranging from 0.5 to 20 microm were used to challenge the samplers. Two wind speeds of 0.5 and 2.0 m/sec were employed as the test wind speeds in this study. The test results indicated that the aspiration efficiency of the two test samplers closely agreed with the ACGIH inhalable convention within the size range of the test aerosols. The aspiration efficiency was found to be independent of the sampling orientation. The collection efficiency acquired from these two samplers showed that the 50% cutoff diameters were both around 0.6 microm. However the wall loss of these two test samplers increased as the aerosol size increased, and the wall loss of PAS-4 was considerably higher than that of PAS-5, especially in the aerosol size larger than 5 microm, which resulted in PAS-4 having a relatively lower capture efficiency than PAS-5. Overall, the PAS-5 is considered a better personal bioaerosol sampler than the PAS-4.