Occupational exposure to electric and magnetic fields during tasks at ground or floor level at 110 kV substations in Finland

The aim was to investigate occupational exposure to electric and magnetic fields during tasks at ground or floor level at 110?kV substations in Finland and to compare the measured values to Directive 2013/35/EU. Altogether, 347 electric field measurements and 100 magnetic field measurements were performed. The average value of all electric fields was 2.3?kV/m (maximum 6.4?kV/m) and that of magnetic fields was 5.8?µT (maximum 51.0?µT). It can be concluded that the electric and magnetic field exposure at ground or floor level is typically below the low action levels of Directive 2013/35/EU. The transposition of the directive will not create new needs to modify the work practice of the evaluated tasks, which can continue to be performed as before. However, for workers with medical implants, the exposure may be high enough to cause interference.     

White-collar workers' self-reported physical symptoms associated with using computers

The aim of our work was to study the physical symptoms of upper- and lower-level white-collar workers using a questionnaire. The study was cross-sectional with a questionnaire posted to 15 000 working-age persons. The responses (6121) included 970 upper- and 1150 lower-level white-collar workers. In the upper- and lower-level white-collar worker groups, 45.7 and 56.0%, respectively, had experienced pain, numbness and aches in the neck either pretty often or more frequently. When comparing daily computer users and nonusers, there were significant differences in pain, numbness and aches in the neck or in the shoulders. In addition, age and gender influenced some physical symptoms. In the future, it is essential to take into account that working with computers can be especially associated with physical symptoms in the neck and in the shoulders when workers use computers daily.     

In-car cell phone use and hazards following hands free legislation

OBJECTIVE: A new law took effect in Finland at the beginning of 2003 which prohibits the handheld use of mobile phones while driving a motor vehicle. The purpose of this study was to assess the impact of the law on phone usage and self-reported safety during the first few months and 16 months later to determine whether the initial level of compliance with the law had been sustained. METHODS: Data were collected by Gallup home poll before (spring 2002) and after legislation took effect (spring 2003 and 2004). A representative sample of drivers who owned a cell phone (n = 836 to 966) was interviewed each time. On-road observations were also collected in four cities for 2003 and 2004. RESULTS: Just after the law, 97% of drivers were aware of the new hands free legislation. In sharp contrast to the pre-law rate of 16%, 43% reported not using the phone while driving immediately after the law and 41% one year later. The occasional users especially reduced their use of phones while driving. The law was correlated to reductions in self-reported handheld use of cell phones while driving, from 55.6% pre-law to 15.2% immediately after passage. In spite of this change, however, the hands free legislation did not reduce self-reported involvement of Finnish drivers in phone-related hazards. Handheld usage was still lower in 2004 than pre-law (20.0%), but the 32% increase from 2003 was significant. Observational data collected in Finland in 2003 and 2004 showed an even higher upward trend in handheld use (87% increase, from 3.1% to 5.8%; pre-law data were not available), and matched a similar increase reported by McCartt and Geary (2004) in their observational evaluation of New York's handheld mobile phone law. CONCLUSION: The self-reports indicate that the hands-free law reduced handheld phone use, among occasional users especially, but did not reduce phone-related hazards. The effect of the law on phone use substantially declined within one year.     

Organic chlorine compounds in lake sediments. III. Chlorohydrocarbons, free and chemically bound chlorophenols

Chlorohydrocarbons and free and chemically bound chlorophenols, catechols and guaiacols were measured from lake sediments in Central Finland. Chlorohydrocarbons occurred at low backround levels except chlorocymenes from pulp mills and PCBs near the city of Äänekoski, where a local leakage occurrs. Free chlorophenols (hexane extractables) were found in all 18 areas studied, but the bound ones (extracted with strong alkali) only in the pulp mill reciepient lakes where they dominated. Preliminary analyses of chemically bound chlorophenols in high molecular fractions of spent bleach liquors and pulp mill effluents indicated that majority of chlorocatechols and guaiacols are bound already in the factory.     

Stomatal characteristics and infection biology of Pyrenopeziza betulicola in Betula pendula trees grown under elevated CO2 and O3

Two silver birch clones were exposed to ambient and elevated concentrations of CO₂ and O₃, and their combination for 3 years, using open-top chambers. We evaluated the effects of elevated CO₂ and O₃ on stomatal conductance (g_s), density (SD) and index (SI), length of the guard cells, and epidermal cell size and number, with respect to crown position and leaf type. The relationship between the infection biology of the fungus (Pyrenopeziza betulicola) causing leaf spot disease and stomatal characteristics was also studied. Leaf type was an important determinant of O₃ response in silver birch, while crown position and clone played only a minor role. Elevated CO₂ reduced the g_s, but had otherwise no significant effect on the parameters studied. No significant interactions between elevated CO₂ and O₃ were found. The infection biology of P. betulicola was not correlated with SD or g_s, but it did occasionally correlate positively with the length of the guard cells.     

Penetration patterns of monomeric and polymeric 1,6-hexamethylene diisocyanate monomer in human skin

We investigated penetration patterns of monomeric and polymeric 1,6-hexamethylene diisocyanate (HDI), experimentally and as part of commercial products, in excised full-thickness human skin at 5, 10, 30, or 60 min after exposure. We observed that both monomeric and polymeric HDI were readily absorbed into the skin and that the clearcoat composition affects the penetration rate of the individual isocyanates. The short-term absorption rates for HDI monomer, biuret, and isocyanurate were determined and used to estimate the exposure time required to reach a body burden equal to the American Conference of Governmental Industrial Hygienists (ACGIH) inhalation threshold limit value (TLV) or Oregon State occupational exposure limit (OEL). Oregon is the only government entity in the United States to promulgate a short-term exposure limit (STEL) for HDI-based polyisocyanates biuret and isocyanurate. Based on these absorption rates for a slow-drying clearcoat after 10 min (1.33 μg cm(-2) h(-1)) or 60 min (0.219 μg cm(-2) h(-1)), we calculated that 6.5 and 40 min dermal exposure, respectively, is required to achieve a dose of HDI equivalent to the ACGIH TLV. For biuret, the time to achieve a dose equivalent to the Oregon OEL for slow-drying clearcoat was much shorter (<31 min) than that for fast-drying clearcoat (618 min). Isocyanurate had the shortest skin absorption times regardless of clearcoat formulation (14 s-1.7 min). These results indicate that the dose received through dermal exposure to HDI-containing clearcoats has a significant potential to exceed the dose equivalent to that received through inhalation exposure at established regulatory limits. A critical need exists to monitor dermal exposure quantitatively in exposed workers, to use proper protective equipment to reduce dermal exposure, and to re-evaluate regulatory exposure limits for isocyanates.     

Preliminary Study to Assess the Performance of Mengovirus Elution from Sludge

In the virus detection protocol for sludge, the viral elution step from solids to solution is critical. In this study, mengoviruses were detected in artificially contaminated sludge with a qRT-PCR assay. The viral yields ranged between 19 and 66 % for 60 % sludge. This study demonstrates that mengovirus can be used as a sample process control for analysis of sewage sludge.     

Factors affecting variability in the urinary biomarker 1,6-hexamethylene diamine in workers exposed to 1,6-hexamethylene diisocyanate

Although urinary 1,6-hexamethylene diamine (HDA) is a useful biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI), a large degree of unexplained intra- and inter-individual variability exists between estimated HDI exposure and urine HDA levels. We investigated the effect of individual and workplace factors on urine HDA levels using quantitative dermal and inhalation exposure data derived from a survey of automotive spray painters exposed to HDI. Painters' dermal and breathing-zone HDI-exposures were monitored over an entire workday for up to three separate workdays, spaced approximately one month apart. One urine sample was collected before the start of work with HDI-containing paints, and multiple samples were collected throughout the workday. Using mixed effects multiple linear regression modeling, coverall use resulted in significantly lower HDA levels (p = 0.12), and weekday contributed to significant variability in HDA levels (p = 0.056). We also investigated differences in urine HDA levels stratified by dichotomous and classification covariates using analysis of variance. Use of coveralls (p = 0.05), respirator type worn (p = 0.06), smoker status (p = 0.12), paint-booth type (p = 0.02), and more than one painter at the shop (p = 0.10) were all found to significantly affect urine HDA levels adjusted for creatinine concentration. Coverall use remained significant (p = 0.10), even after adjusting for respirator type. These results indicate that the variation in urine HDA level is mainly due to workplace factors and that appropriate dermal and inhalation protection is required to prevent HDI exposure.     

Is the Water Footprint an Appropriate Tool for Forestry and Forest Products: The Fennoscandian Case

The water footprint by the Water Footprint Network (WF) is an ambitious tool for measuring human appropriation and promoting sustainable use of fresh water. Using recent case studies and examples from water-abundant Fennoscandia, we consider whether it is an appropriate tool for evaluating the water use of forestry and forest-based products. We show that aggregating catchment level water consumption over a product life cycle does not consider fresh water as a renewable resource and is inconsistent with the principles of the hydrologic cycle. Currently, the WF assumes that all evapotranspiration (ET) from forests is a human appropriation of water although ET from managed forests in Fennoscandia is indistinguishable from that of unmanaged forests. We suggest that ET should not be included in the water footprint of rain-fed forestry and forest-based products. Tools for sustainable water management should always contextualize water use and water impacts with local water availability and environmental sensitivity.