Photodecomposition of Isofenphos (O‐ethyl‐O(2‐isopropoxycarbonyl)‐phenyl)‐Isopropylphos‐Phoramidothioate)

Photodecomposition of the organophosphorus insecticide isofenphos (O‐ethyl‐O‐(2‐isopropoxy‐carbonyl)‐phenyl)‐N‐isopropylphosphoremidothioate) has been studied in solution, on glass and soil surfaces. Isofenphos underwent oxidation from P = S to the P = O group and deesterification on irradiation in hexane and methanol. Photoproducts were isolated and identified by spectroscopic methods.     

Microplankton dynamics of a coastal lagoon,Chilika: interactive effect of environmental parameters on microplankton groups

Microplankton population of Asia’s largest coastal lagoon Chilika was studied for five major groups, bacillariophyceae, cyanophyceae, chlorophyceae, dinophyceae, rotifera, and tintinninae. The study reported presence of 233 species of microplankton whose average annual abundance was 1631 cells/l. The physicochemical parameters contributing to the spatio-temporal fluctuations in microplankton diversity, abundance, and community structure were identified as salinity, pH, DO, nitrate, and silicate. Salinity, transparency, depth, and silicate most explained the abundance of bacillariophyceae; nitrate, pH, and DO influenced cyanophyceae; salinity, transparency, and chlorophyll concentration influenced chlorophyceae; salinity, depth, and water temperature influenced dinophyceae; salinity, free CO2, and nitrate-influenced rotifers, whereas salinity, pH, DO, and depth influenced tintinnids. Biotic-abiotic relationships revealed particular preference of environmental conditions at species level in groups like bacillariophyceae, cyanophyceae, and dinophyceae. Although the lagoon is shallow, bacillariophyceae-environment interaction showed depth can be a critical factor for species like Aulocoseira sp., Amphipleura sp., and Rhophalodia sp. Species of dinoflagellates like Dinophysis caudata, Noctiluca scintillans, and Protoperidinium proliferated in lower level of silicate. Unlike other cyanophyceae species Streptococcus sp., Chroococcus sp., Diplococcus sp., Aphanocapsa sp., and Gloeocapsa sp. were negatively influenced by nitrate concentration. The study provides better scope for ecological management of the lagoon with respect to conserving biodiversity and hydrological quality of the ecosystem.     

UVΑ pre-irradiation to P25 titanium dioxide nanoparticles enhanced its toxicity towards freshwater algae Scenedesmus obliquus

Environmental Science and Pollution Research - There has recently been an increase in the usage of TiO2 nanoparticles (NPs). P25 TiO2 NPs, a mixture of anatase and rutile phase in 3:1 ratio, are...     

An approach for determining the extent of contribution of construction project features to accident causation

In the pursuit of Health and Safety (H&S) improvement within the UK construction industry, several studies have been conducted to identify accident causal factors to enable the development of accident prevention measures. Adding to such studies, a critique of H&S literature demonstrates that construction project features (CPFs) such as the nature of project, method of construction, site restriction, project duration, procurement system, design complexity, level of construction, and subcontracting contribute to accident causation and that their contribution is through the introduction of proximal accident causal factors into the construction process. However, the extent of this contribution by these CPFs remains sparingly known and requires further investigation. The study provides this insight by indicating that the extent to which CPFs contribute to accident causation is influenced by two factors; the extent to which the proximal factors contribute to accident causation; and the extent to which the proximal factors are prevalent within the CPFs. In line with this fresh insight, an approach for determining the extent to which CPFs contribute to accident causation is put forth. The approach proposes to use a qualitative–quantitative rating scale to determine the two determinant factors and then combine them using a mathematical formula to obtain the extent to which CPFs contribute to accident causation. By this approach the grey areas in literature concerning the extent to which CPFs contribute to accident causation will be illuminated and by that contribute to improvement in construction accident prevention.     

Triethylamine induced photolysis of endosulphan

Photolysis of pure isomers of endosulphan in the presence of triethylamine gives products arising by the loss of a chlorine atom from the geminal bridge. The structures of these products have been established. The α‐isomer of endosulphan isomerised to ß‐isomer on a leaf surface.     

Studies on the use of low-volatile non-edible oils in a thermal barrier-coated diesel engine

Owing to the ever-increasing vehicle population, the consumption of diesel fuel in the transportation, agricultural and industrial sectors has increased at an alarming rate. This has led to rapid fossil fuel depletion, ozone depletion and environmental degradation, which have become a serious concern. Search for alternative renewable and clean energy fuel sources to mitigate the emissions of greenhouse gases is continuing, and attempts to find different techniques for efficient utilization of these fuels are also undertaken. Biodiesel being an oxygenated fuel obtained from vegetable oils has received greater attention over the years as a promising alternative to diesel fuel. However, vegetable oils exhibit high viscosity, poor volatility and poor cold-flow characteristics. These characteristics can cause the following problems in the engine when run for a longer duration: injector coking, severe engine deposits, filter gumming, piston ring sticking and thickening of lubrication. These problems can be eliminated or minimized by adopting suitable fuel processing techniques to obtain biodiesels from vegetable oils. The fuel processing techniques vary widely, which include transesterification, supercritical methanolysis, ultrasonic and continuous microwave-assisted transesterification methods. In the present study, the transesterification method is effectively used to obtain biodiesels from non-edible oils of honne and cotton seed. The biodiesels obtained from these oils were used in the unmodified diesel engine to check their feasibility as diesel engine alternatives. Different thermal barrier coatings (TBCs) were applied on the piston, cylinder head, and inlet and exhaust valve surfaces of the diesel engine in order to make it a fully adiabatic engine. The engine with such TBCs is called a low heat rejection engine. For the present study, the TBC of partially stabilized zirconia (PSZ) and aluminium oxide (Al₂O₃) were selected. Finally, the performance of the diesel engine fuelled with different biodiesels in both conventional and thermal barrier-coated modes was compared. The thermal barrier-coated engine with the PSZ version showed better performance with increased nitric oxide emissions when compared with the Al₂O₃ coating.     

Effects of injection timing,injector opening pressure and nozzle geometry on the performance of cottonseed oil methyl ester-fuelled diesel engine

Increasing petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for engines. Evolving technology and a recurring energy crisis necessitates a continuous investigation into the search for sustainable and clean-burning renewable fuels. In this paper, cottonseed oil methyl ester (COME) was used in a four-stroke, single-cylinder variable compression ratio diesel engine. Tests were carried out to study the effects of fuel injection timing, fuel injector opening pressure (IOP) and injector nozzle geometry on the performance and combustion of COME biodiesel fuel used in a compression ignition engine with a single fuel mode. Fuel injection timing varied from 19° to 27° before top dead centre (bTDC) in incremental steps of 4° bTDC; fuel IOP varied from 210 to 240 bar in incremental steps of 10 bar. Fuel nozzle injectors with three, four and five holes, each of 0.3 mm size, were selected for the study. The results suggested that with retarded injection timing of 19° bTDC, increased IOP of 230 bar and a four-hole nozzle injector of 0.3 mm size resulted in overall better engine performance with an increased brake thermal efficiency and reduced HC, CO and smoke emission levels.     

Bioavailable DDT residues in sediments: laboratory assessment of ageing effects using semi-permeable membrane devices

We describe the reduction in bioavailability of DDT in contaminated soil after it was incubated as sediment for 365 d. Bioavailability was assessed using semi-permeable membranes. Contaminated soils from three cattle dip sites, one spiked paired uncontaminated site, and one spiked OECD standard soil were studied. Sandy soil with residues of 1880 mg/kg summation operator DDT incurred since 1962, initially had 4.6% of summation operator DDT available, reducing to 0.6% following 365 d. Clay soil (1108 mg summation operator DDT/kg) had 4.1% initially available, reducing to 0.3% after 365 d. Freshly spiked soils had a greater amount of DDT initially available (10.9%), but this reduced to 1.5% by the end of the incubation. Of the DDT congeners, both o,p'-DDD and p,p'-DDD were most bioavailable in the soils, but also had the most significant decrease following incubation.     

Preconcentration technique for the determination of trace elements in natural water samples by ICP-AES

A procedure was developed for the determination of Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) after preconcentration on a morpholine dithiocarbamate (mor-DTC) supported by bagasse (Saccharam aphisinaram). The sorbed elements were subsequently eluted with 4,M HNO₃ and the acid eluates were analysed by ICP–AES. The influence of various parameters such as pH, flow rate of sample, eluent concentration, volume of the sample and volume of eluent were investigated to enhance the sensitivity of the present method. A 20,mL disposable syringe served as preconcentration column. Under the optimal conditions Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in aqueous sample was concentrated about 100-fold. The sorption recoveries of elements were higher than 99.6%. The method is also applied for the analysis of natural and spiked water samples.     

Assessing combined toxic effects of tetracycline and P25 titanium dioxide nanoparticles using Allium cepa bioassay

• UVA pre-irradiation to TiO₂ NPs enhanced its toxicity toward plant A. cepa. • UVA TiO₂ NPs increased intracellular ROS, resulting in more cell damage. • Cell death enhanced cell permeability and increased uptake of NPs. • Being highly toxic (EC₅₀ = 0.097 µmol/L), TC did not increase ROS generation. • Even at a low dose, TC enhanced the toxic potential of TiO₂ NPs significantly. Usage of titanium dioxide nanoparticles (TiO₂ NPs) and tetracycline (TC) has increased significantly in the present era. This leads to their release and accumulation in the environment. Both the compounds, individually, can have adverse toxic effects on the plants. Their binary mixtures can increase this degree of damage. The present study aimed to evaluate the toxicity of both the contaminants in individual and binary mixtures in Allium cepa. Further, the toxicity of TiO₂ NPs upon UVA pre-irradiation was also measured. Results showed that UVA pre-irradiated NPs (UVA-TiO₂ NPs) had a significant decrease in cell viability than their non-irradiated counterparts (NI-TiO₂), denoting an increase in photocatalytic activity upon UVA pre-irradiation. Very low concentrations of TC (EC₁₀ = 0.016 µmol/L) mixed with TiO₂ NPs significantly increased the toxicity for both UVA-TiO₂ and NI-TiO₂ NPs. Intracellular ROS generation was significantly high for UVA-TiO₂ NPs. However, TC did not have any effects on ROS production. Both the compounds exhibited genotoxic potential in A. cepa. Different chromosomal abnormalities like anaphase bridges, telophase bridges, laggard chromosomes, binucleate cells, etc. were observed. The binary mixture of UVA-TiO₂ NPs and TC showed the highest chromosomal aberrations (64.0%±1.26%) than the mixture with NI-TiO₂ or the individual contaminants. This decreased significantly after recovery (46.8%±1.92%), denoting the self-repair processes. This study proved that UVA-TiO₂ NPs were more toxic and could be enhanced further when mixed with a sub-lethal concentration of TC. This work will help to assess the risk of both compounds in the environment.