Comparison of residue levels of persistent organochlorine compounds in butter from Spain and from other European countries

Abstract

Commercially available butter from Spain (n=36) and from other European countries (n=20) has been analyzed by high resolution gas chromatography with an electron capture detector for organochlorine contaminants. The results showed that both groups of samples have a similar pattern of these pollutants, but in all cases where significant differences in concentrations were found, Spanish samples presented higher values. This was especially notable for lindane (median values 11.6 vs. 3.0 ng/g wet weight), hexachlorobenzene (6.4 vs. 0.5) and ß‐hexachlorocyclohexane (3.1 vs. 1.2). Total PCBs showed no differences (5.4 vs. 6.6), but detailed analysis of congener composition indicated a higher presence in Spanish samples of the most persistent chlorinated PCBs. No sample presented levels of concern for any single organochlorine compound. It is interesting to note that consumption of butter in Spain is low so, although levels of organochlorines are higher than those found in other countries, consumers are less exposed through this foodstuff than in other European countries. These results also confirm the fact that environmental pollution by organochlorines is more important in Spain than in the rest of Europe.     

Assessing the impact of petrol stations on their immediate surroundings

This paper describes a novel methodology for evaluating the extent to which petrol stations affect their surroundings. The method is based on the fact that the ratio of the concentrations of aliphatic and aromatic hydrocarbon pollutants in the air of the petrol stations and their surroundings (basically determined by vapor emissions from unburned gasoline) differs from the ratio found in urban air, which is mainly influenced by traffic emissions. Bearing this in mind, the spatial limit of influence of petrol stations in any direction would be the first point, moving away from the station, where the ratio becomes equal to the urban background ratio. Application of the methodology involves multipoint measuring campaigns of the air at the studied petrol station and built-up area in general and processing the data with software capable of providing isoconcentration contours. The procedure should help local authorities in terms of land management, so that a “belt” can be established around petrol stations where housing or vulnerable populations and activities such as those in schools, hospitals and community centers should be restricted.     

Design and first experimental results of a bubbling fluidized bed for air gasification of plastic waste

Plastic wastes have an especially high potential for use as alternative fuels, considering their high heating value and their large and stable availability. They could be used in electricity production based on gasification technologies, wherein electricity is produced in engines by means of the conversion of plastic wastes into a valuable gas. However, there are still some technical barriers to overcome before this technology can access the commercial stage, and further scientific research is needed to gain deeper understanding of the process and to be able to control and optimize it. This research presents the design and first experimental results of a bubbling fluidized bed gasifier conceived for the gasification of actual plastic residues. The experimental tests revealed that the selection and design of the reactor were adequate and proved some of the advantages of using plastic as a fuel, related in part to the absence of ashes and char. A valuable syngas over 5 MJ/m³ was generated, which contained a considerable fraction of methane as well as hydrogen and carbon monoxide as main combustible gases. The highest efficiency was achieved when the equivalence ratio was increased to 0.35, reaching 61 % in terms of cold gas efficiency and 66 % carbon conversion.     

Mixed but not admixed: a spatial analysis of genetic variation of an invasive ascidian on natural and artificial substrates

Following the introduction to a new area (pre-border dispersal), post-border processes determine the success in the establishment of non-indigenous species (NIS). However, little is known on how these post-border processes shape the genetic composition of NIS at regional scales. Here, we analyse genetic variation in introduced populations along impacted coastlines to infer demographic and kinship dynamics at the post-border stage. We used as a model system the ascidian species Microcosmus squamiger that has been introduced worldwide. This species can colonize and grow fast on man-made artificial structures, impacting activities such as mariculture. However, it can also establish itself on natural substrates, thus altering natural communities and becoming an ecological problem. We genotyped 302 individuals from eight populations established on natural and artificial substrates in the north-western Mediterranean Sea, using six microsatellite loci. We then compared the resulting genotypes with those found within the native range of the species. We found high levels of genetic diversity and allelic richness in all populations, with an overall deficit of heterozygotes. Autocorrelation analyses showed that there was no within-population genetic structure (at a scale of tens of metres); likewise, no significant differentiation in pairwise comparisons between populations (tens of kilometres apart) and no isolation-by-distance pattern was found. The results suggest that M. squamiger has a natural capacity for high dispersal from one patch of hard substrate to another and no differences whatsoever could be substantiated between natural and artificial substrates. Interestingly, two groups of genetically differentiated individuals were detected that were associated with the two ancestral source areas of the worldwide expansion of the species. Individual assignment tests showed the coexistence of individuals of these two clusters in all populations but with little interbreeding among them as the frequency of admixed individuals was only 15 %. The mechanism responsible for maintaining these genetic pools unmixed is unknown, but it does not appear to compromise post-border colonization of introduced populations.     

Laboratory study on the leaching potential of spent alkaline batteries using a MSW landfill leachate

Two leaching tests were carried out, one with whole batteries and another with cross-cut batteries. In both cases, NEN 7343 (a Nederland’s Standard) procedure was followed using a municipal solid waste (MSW) landfill leachate as extraction solution. Seven fractions were collected corresponding to cumulative liquid/solid (L/S) ratio from 0.1 to 10.0. Those fractions were separately characterized in terms of pH, conductivity, redox potential, density, sulphate, chloride, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Tl and Zn. Results showed that the influence of the alkaline batteries in the landfill leachate composition varies with their physical integrity and with the L/S ratio, and several variations were observed throughout the tests. The leachate pH and redox potential increased as result of the contact with batteries, particularly pH in the test with the cross-cut batteries. The leachate density and conductivity did not change significantly with the whole batteries, in contrast with the test with cross-cut batteries.     

Intelligent Databases Assist Transparent and Sound Economic Valuation of Ecosystem Services

Assessment and economic valuation of services provided by ecosystems to humans has become a crucial phase in environmental management and policy-making. As primary valuation studies are out of the reach of many institutions, secondary valuation or benefit transfer, where the results of previous studies are transferred to the geographical, environmental, social, and economic context of interest, is becoming increasingly common. This has brought to light the importance of environmental valuation databases, which provide reliable valuation data to inform secondary valuation with enough detail to enable the transfer of values across contexts. This paper describes the role of next-generation, intelligent databases (IDBs) in assisting the activity of valuation. Such databases employ artificial intelligence to inform the transfer of values across contexts, enforcing comparability of values and allowing users to generate custom valuation portfolios that synthesize previous studies and provide aggregated value estimates to use as a base for secondary valuation. After a general introduction, we introduce the Ecosystem Services Database, the first IDB for environmental valuation to be made available to the public, describe its functionalities and the lessons learned from its usage, and outline the remaining needs and expected future developments in the field.     

Accumulation of heavy metals and antioxidant responses in Vicia faba plants grown on monometallic contaminated soil

The purpose of this study was to explore the effects of soil contamination by selected metals (cadmium, copper, nickel, lead or zinc) on the antioxidant response of Vicia faba plants. The levels of the antioxidants: glutathione, proline, non-protein thiols, as well as guaiacol peroxidase and catalase activities were measured in the upperparts of plants. Additionally, the potential bioavailability of metals in the soil and their concentrations in V. faba plants were compared. Treatment with metal caused the problem of an elevation in its bioavailability in soil and its concentration in leaves and stems. The most serious problems seemed to be metal elevations in soil, especially Zn and Ni as well as in the aerial parts of V. faba plants. The antioxidant responses appeared to be metal specific. The elevation of guaiacol peroxidase activity in leaves and stems as well as the proline in leaves was the only more general reaction to metal exposure. Upon analysis of the effects of soil metal contamination on V. faba plants, we recommend the use of some measurements such as guaiacol peroxidase activity and proline level as useful tools in biological monitoring.     

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.     

Use of solvent extraction for the removal of heavy metals from liquid wastes

Solvent extraction is recommended as a suitable method for the removal of heavy metals from the waste waters of the chemical and electronic industries. Common extractants are organic compounds with molecular mass 200–450, almost insoluble in water (5–50 ppm), that selectively extract metals from aqueous solutions. On the basis of data from the literature, the extraction conditions are reviewed for the metals that cause problems in waste waters. The extraction conditions are understood to mean the type of extractant, anion present in the aqueous phase, and pH. As far as the data permit, the metals are ordered according to their extractability by given extractants. Special attention is paid to the main source of contamination of waste waters by heavy metals, namely electroplating plants. Two examples of the design of mixer-settler batteries are presented, which demonstrate continuous removal of heavy metals from the waste waters of electroplating plants to levels below the permissible limits. The first example illustrates removal of cadmium using triisooctylamine in a mixer-settler battery with the pertraction flow-arrangement; the second, removal of zinc and lead from rinse waters using the organophosphoric acid DEHPA (bis (2-ethylhexyl) phosphoric acid) in a battery with counter-current flow and reflux. The extraction equilibrium data were obtained in laboratory experiments using chloride solutions in concentrations close to those in the rinse waters of electroplating plants (erná and Volaufová, 1991).