Land-use change and its socio-environmental impact in Eastern Ethiopia’s highland

The Alemaya district (Eastern Ethiopian highlands) is characterized by undulating physiographic features with arid, semi-arid, and humid climatic conditions. This study evaluated socio-environmental changes in land use and land cover during 1985–2011. Screen digitization on remotely sensed data (i.e., Landsat images from 1985 to 2011) was performed to produce 10 classes of land use and land cover. Then, final land-use maps were prepared using a geographic information system following field verification and accuracy assessment. The drying of water bodies, including the prominent lakes Alemaya, Adele, and Tinike, had been the most important environmental change observed. Degraded land, marsh, perennial cropland, and residential areas increased by 37, 438, 42, and 190 %, respectively, whereas grassland, plantation, shrubland, and temporal cropland decreased by 64, 11, 63, and 29 %, respectively. The increase in land degradation (+37 %), the other major observed problem, has made large areas unsuitable for agriculture and has reduced crop productivity. These land-use and land-cover changes have affected both the environment and the livelihoods of local residents; especially the issue related to land degradation requires urgent attention.     

Nanocatalyzed biodiesel synthesis from the oily contents of Marine brown alga Dictyota dichotoma

This research article demonstrates biodiesel synthesis through the methanolysis of the oily contents (4.02 ± 0.27% w/w on dried basis) of Dictyota dichotoma collected from the coast of Hawksbay, Pakistan. The metal oxides (CaO, MgO, ZnO, and TiO₂) used as nanocatalysts were refluxed (5% K₂SO₄), calcinated (850 °C) and characterized by Atomic Force Microscopy (AFM) which produced 93.2% w/w FAME (biodiesel) at relatively mild condition (5% catalyst, 65 °C, 3 h, 18:1 molar ratio) using CaO. Whereas, MgO, ZnO, and TiO₂ produced 92.4%, 72.5%, and 31.8% w/w FAME, respectively at elevated condition (225 °C). Thus, CaO was considered to be the best catalyst among the others. This tri-phase reaction require continuous fast mixing and the yield depends on the reaction parameters like catalyst amount, temperature, reaction time and molar ratio (methanol: oil). The reusability of these heterogeneous catalysts simplified the purification step, reduced the waste generation and make the final product technically and economically viable.     

Microwave irradiation and citric acid assisted seed germination and phytoextraction of nickel (Ni) by <Emphasis Type="Italic">Brassica napus</Emphasis> L.: morpho-physiological and biochemical alterations under Ni stress

The complex bio-geochemistry of soil allows pollutant to persist for a longer period of time which further decreased the fertility and natural composition of land. Nickel, an inorganic pollutant, coming from a wide range of industrial and manufacturing units possesses serious threat to soil degradation and crop productivity around the world. The present study was carried to evaluate the combined role of microwave irradiation (MR) and citric acid (CA) on the phytoextraction potential of Brassica napus L. under Ni stress. An initial seed germination test was conducted to select effective time scale of MR exposure. Highest seed germination was observed at exposure of 2.45 GHz frequency for 30 s. Healthy seeds of B. napus L. genotype Faisal Canola (RBN-03060) treated with MR at 2.45 GHz for 30 s were sown in plastic pots filled with 5 kg of soil. Nickel and CA applied exogenously in solution form with different combinations to both MR-treated and untreated B. napus plants. The MR-treated plants showed higher growth, biomass, photosynthetic pigments (Chl a, b, total, and carotenoids) and activities of antioxidant enzymes (SOD, POD, APX, CAT) as compared to untreated plants who showed higher reactive oxygen species (MDA, H₂O₂) and electrolyte leakage. Increasing Ni concentration significantly decreased the physiological and biochemical attributes of B. napus both in MR-treated and untreated plants. The addition of CA alleviated Ni-induced toxic effects in both MR-treated and untreated plants by improving antioxidant defense system. The degree of Ni stress mitigation was higher in MR-treated plants. The Ni concentration was higher in root, stem, and leaves of MR-treated plants under CA application as compared to untreated plants. The present study concluded that seeds treated with MR before sowing showed higher accumulation and concentration of Ni from soil, and this phenomenon boosted with the application of CA.     

Phyto-management of Cr-contaminated soils by sunflower hybrids: physiological and biochemical response and metal extractability under Cr stress

Environmental Science and Pollution Research - Chromium (Cr) is a biologically non-essential, carcinogenic and toxic heavy metal. The cultivation of Cr-tolerant genotypes seems the most favorable...     

An investigation of ergonomics analysis tools used in industry in the identification of work-related musculoskeletal disorders.

Web-based surveys were sent to Canadian certified ergonomists, Joint Health and Safety Committees (JHSCs) and health and safety certification trainers to understand better which ergonomics analysis tools were used in industry and help JHSCs obtain the necessary training required to reduce work-related musculoskeletal disorders (WMSDs). The results showed that most of the certified ergonomists used the Snook/Mital tables, the National Institute of Occupational Safety and Health (NIOSH) equation and rapid upper limb assessment (RULA) /rapid entire body assessment (REBA). The most frequently used methods by JHSCs to identify ergonomics risk were injury reports and worker complaints. The surveys for the health and safety certification trainers revealed that most curricula did not include ergonomics analysis tools. There appears to be a gap between what is recommended by certified ergonomists for JHSC, what is taught in training and what is used by JHSCs for ergonomics risk analysis. A better understanding, modifications in training curricula and education of JHSCs are needed to help reduce WMSDs.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

Simplified determination of lipophilic metabolites of nonylphenol ethoxylates: method development and application in aqueous samples from Buenos Aires, Argentina

In the present work we have developed an analytical methodology for the determination of nonylphenol (NP) and nonylphenol mono- and di-ethoxylates (NP1EO and NP2EO) in water samples. The applicability of this methodology was proved by means of the analysis of environmentally relevant aqueous samples from Buenos Aires. This constitutes a starting point for a rigorous assessment of the incidence of NPnEO surfactants in Argentina, as only very few, qualitative or semi-quantitative data on the occurrence of these compounds in local systems were available up to this time. Enrichment of the analytes was carried out by solid-phase extraction on a C-18 sorbent, followed by elution with ethyl acetate. Normal-phase high performance liquid chromatography on an amino-silica column and fluorescence detection at excitation-emission wavelengths of 230-300 nm were employed for separation and quantification of the analytes. Confirmation of peak assignment in selected real samples was performed by off-line coupling HPLC with GC-MS analysis. A non-polar GC capillary column was used, and a characteristic peak pattern was obtained for the alkyl chain isomers of each ethoxylated homologue and NP. GC-MS analyses yielded in all cases purity levels higher than 80% for the HPLC collected fractions. The elevated concentrations found for the estrogenic metabolites of NPnEO are in accordance with an unrestricted use of this class of non-ionic surfactants in the country.     

Groundwater quality assessment and its correlation with gastroenteritis using GIS: a case study of Rawal Town,Rawalpindi, Pakistan

Majority of the people of Pakistan get drinking water from groundwater source. Nearly 40 % of the total ailments reported in Pakistan are the result of dirty drinking water. Every summer, thousands of patients suffer from acute gastroenteritis in the Rawal Town. Therefore, a study was designed to generate a water quality index map of the Rawal Town and identify the relationship between bacteriological water quality and socio-economic indicators with gastroenteritis in the study area. Water quality and gastroenteritis patient data were collected by surveying the 262 tubewells and the major hospitals in the Rawal Town. The collected spatial data was analyzed by using ArcGIS spatial analyst (Moran’s I spatial autocorrelation) and geostatistical analysis tools (inverse distance weighted, radial basis function, kriging, and cokriging). The water quality index (WQI) for the study area was computed using pH, turbidity, total dissolved solids, calcium, hardness, alkalinity, and chloride values of the 262 tubewells. The results of Moran’s I spatial autocorrelation showed that the groundwater physicochemical parameters were clustered. Among IDW, radial basis function, and kriging and cokriging interpolation techniques, cokriging showed the lowest root mean square error. Cokriging was used to make the spatial distribution maps of water quality parameters. The WQI results showed that more than half of the tubewells in the Rawal Town were providing “poor” to “unfit” drinking water. The Pearson’s coefficient of correlation for gastroenteritis with fecal coliform was found significant (P?P?P?相似文献   

Construction safety: An analysis of systems failure: The case of the multifunctional Bos & Lommerplein estate,Amsterdam

Bos & Lommer is a district in the west of Amsterdam. The new centre, consisting of the district office, 96 apartments, a few dozen businesses and shops, a two-storey parking lot with capacity for more than 500 cars, and a market place, was completed in 2004. Less than 2 years later, in July 2006, this whole multifunctional complex had to be urgently cleared, because its safety could not be guaranteed.The investigations revealed that the planning and realisation of the Bos & Lommer complex were anything but exceptional. What happened there could have happened anywhere in the Netherlands and possibly elsewhere.This paper analyses the decision-making process in the planning and construction of the Bos & Lommerplein estate on the basis of accident causation theories. It will ascertain which safety science methodology is best equipped to describe and analyse the events in this multifunctional estate. The analysis forms the basis for a reflection on a set of concrete guidelines for designing and constructing complex projects. Construction safety would be enhanced if the scope for improvement in decision-making on complex building projects were properly utilised.