Transport of metanil yellow in the rat plasma and interaction of its metabolite,p‐aminodiphenylamine with serum proteins

Binding affinity of metanil yellow and its breakdown product p‐aminodiphenylamine to serum proteins has been studied employing chromatographic separation on Sephadex G‐200 and by paper and polyacrylamide gel electrophoresis. Metanil yellow has more affinity towards albumin than to globulins. The complexing is presumably through electrostatic forces. p‐Aminodiphenylamine on the other hand, preferably binds to globulin fractions of serum protein. However, a stable binding with BSA alone was also observed. The binding was quite stable and was accompanied by a shift in absorbance from 430 nm to 500 nm. Aspartic acid moiety of protein was found to be one of the units involved in the binding of p‐ADPA to proteins.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

I-Risk: development of an integrated technical and management risk methodology for chemical installations

This paper presents an integrated quantitative risk assessment method for hazardous installations, taking into account management as well as technical design and producing risk level measures. The key components of the I-Risk methodology are the technical model, the management model and their interface. The technical model consists of developing a master logic diagram (MLD) delineating the major immediate causes of loss of containment (LOC) and associated quantitative models for assessing their frequency. The management model consists of the tasks, which must be carried out systematically in the primary business functions (such as operations, emergency operations, maintenance and modifications). A management audit quantifies the quality of these management tasks. The management–technical interface modifies certain parameters of the technical model on the basis of the quality of the safety management system of the specific installation. The methodology is exemplified through its application to the risk assessment of an ammonia storage facility. A detailed technical model simulating the response of the system to various initiating events is developed along with a detailed management model simulating the influence of the plant-specific management and organisational practices. The overall effect is quantified through the frequency of release of ammonia as a result of a loss of containment in a storage tank and in a pipeline.     

Metabolic transformations of acquired lucibufagins by firefly “femmes fatales”

Summary. Female Photuris fireflies sequester defensive steroidal pyrones (lucibufagins) from male fireflies of the genus Photinus. Lucibufagin analyses of Photuris females and Photinus ignitus males show that the lucibufagin mixtures of predator and prey differ in their composition. Analyses of whole body extracts showed that P. ignitus males contain a mixture of eight non-glycosylated lucibufagins, composed mostly of compounds with two oxygenated positions in the steroidal A-ring (C-3, C-5). After feeding on P. ignitus males, Photuris females contain six major lucibufagins. Three of these compounds are not present in the prey, including the novel lucibufagin glycoside 5β,11α-dihydroxy-12-oxo-3β-O-β-D-xylopyranosylbufalin, and two other lucibufagins with a trioxygenated A-ring (C-2, C-3, C-5). These results indicate that Photuris females transform the sequestered lucibufagins both by glycosylation and oxidation, which could affect the systemic transportability of these compounds due to an increase in their polarity. Received 18 February 1999; accepted 19 April 1999.     

Controlled readability of Seveso II company safety documents,the design of a new KPI

Companies often use a substantial quantity of safety-related documents such as the front gate safety flyer, emergency evacuation instructions, work permits, safety procedures, work instructions and policy statements. In many cases the personnel magazines and message board notes also contain safety information. The authors and readers may not be in the same department, premises or cultural group. Both authors and readers are diverse groups when it comes to reading, writing and language skills. Previous research has found that Seveso II companies produce documents that are difficult for their workforce and visitors to understand. Authors do not write systematically to match the reader’s skill level. This may be due in part to the quality and effectiveness of layout guidance, expert linguistic advice and document appraisal systems. These do not in general provide the immediate support needed. Layout suggestions are of limited effectiveness, and availability and usability limits the value of expert advice and appraisal systems. So, without useful feedback, many authors cannot write sufficiently readable documents; to overcome this threshold, they need a quick document readability assessment tool. With such a tool, readability can become a controlled property of safety documents. Large companies may use hundreds or thousands of documents containing safety information. This paper presents a practical approach for the transition to, and monitoring of, controlled readability for all documents related to safety. A new Key Performance Indicator design on readability is proposed.     

Cattle egrets as a biosentinels of persistent organic pollutants exposure

We investigated selected chlorinated pollutants (β-HCH, γ-HCH, DDDs, DDEs, o,p′-DDT, p,p′-DDT, heptachlor, aldrin, dieldrin, and endrin) in the Lahore and the Sialkot districts of Pakistan, using eggs of cattle egret (Bubulcus ibis) collected during May and June 2007. The pollutant with highest level and frequency was ΣDDT, followed by β-HCH, γ-HCH, heptachlor, aldrin, dieldrin, and endrin in descending order. The concentration(s) were significantly higher in Sialkot heronry for all the pollutants (except p,p′-DDT) than in Lahore. The values for DDTs, β-HCH, γ-HCH, and heptachlor were significantly higher (p < 0.05) in the egg(s) than in sediment(s) and in the chicks’ diet, due to biomagnification. Among DDTs analogues, p,p′-DDD was the major contaminant with >60 % of total DDT burden, reflecting the widespread aged as well as recent use of DDT as well as anaerobic degradation (DDD/DDE > 1 in many cases) in the nearby paddy soils. In few samples, p,p′-DDT/(DDD + DDE) > 0.5 suggested the recent emission patterns from surrounding contaminated areas of demolished DDT units and obsolete pesticide stores. The higher levels of HCHs (i.e., β-HCH) in the samples collected from Sialkot indicate exposure from long-term agricultural use. Overall, concentrations of all studied POPs were less than the threshold levels known to affect reproduction. Nevertheless, total DDTs and/or HCHs burdens in some eggs contained concentrations of greater than what would educe adverse effects on birds. This is among few studies on OCPs exposure to avian species, which provide the evidence of Pakistan’s contribution toward the Global POPs emission.     

Application of Zr(IV) tungstate for removal of metal ions from aqueous solutions

A heteropolyacid Zr(IV) tungstate-based cation exchanger has been synthesized. An amorphous sample, prepared at pH 1.2 and having a Na⁺ ion exchange capacity of 0.92?meq?g^?1, was selected for further studies. Its physicochemical properties were determined using Fourier transform infrared spectrometer, X-ray diffraction, thermogravimetric, and scanning electron studies. To understand the cation exchange behavior of the material, distribution coefficients (K _d) for metal ions in various solvent systems were determined. Some important binary separations of metal ions, namely Mg²⁺–Bi³⁺, Cd²⁺–Bi³⁺, Fe³⁺–Bi³⁺, Th⁴⁺–Bi³⁺, and Fe³⁺–Zn²⁺, were achieved on such columns. The practical utility of these separations was demonstrated by separating Fe³⁺ and Zn²⁺ ions quantitatively in commercial pharmaceutical formulation. The cation exchanger has been successfully applied also for the treatment of industrial wastewater and a synthetic mixture. All the results suggests that Zr(IV) tungstate has excellent potential for the removal of metals from aqueous systems using packed columns of this material.