Influence of lead on growth and nutrient accumulation in canola (Brassica napus L.) cultivars

Canola (Brassica napus L.) is commonly used as a hyper-accumulator for phytoextraction of heavy metals from soil and water. Like many other heavy metals, lead (Pb) contaminates soil, water and air and thus it is a great problem. This study was conducted to investigate toxic effects of Pb on growth and nutrient uptake in four canola cultivars. Each of four cultivars of canola (Con-II, Con-III, Legend and Shiralee) was subjected to four levels of Pb (0, 30, 60 and 90 mg Pb kg(-1) of soil) from lead chloride [PbCl2]. Due to Pb toxicity, plant growth was adversely affected and relatively a severe reduction in root biomass (45.7%) was recorded. The Pb accumulation increased both in shoot and root, the highest being in root. The uptake of different nutrients, i.e., N, P, K, Ca, Mg, Zn, Cu and Mn was reduced (38.4, 32.8, 33.1, 49.6, 7.78, 52.0, 42.6 and 45.9%, respectively) in the shoots and that of N, Fe, Zn, and Cu in the roots (48.5, 33.2, 24.3 and 44.8%, respectively) of all canola cultivars. The root K, P, Zn and Mn and shoot P, Mg and Fe contents were less affected, the concentration of Pb, Ca and Mg in roots of all cultivars. Among canola cultivars Con-II and Con-III performed better than Legend and Shiralee in terms of growth (26.03%) and nutrient accumulation. Overall, plant growth and nutrient accumulation in the canola cultivars was hampered due to the presence of Pb.     

Fluoride contamination in drinking water in rural habitations of Central Rajasthan, India

Fluoride concentration in groundwater sources used as major drinking water source in rural area of block Nawa (Nagaur District), Rajasthan was examined and the toxic effects by intake of excess fluoride on rural habitants were studied. In block 13, habitations (30%) were found to have fluoride concentration more than 1.5 mg/l (viz. maximum desirable limit of Indian drinking water standards IS 10500, 1999). In five habitations (11%), fluoride concentration in groundwater is at toxic level (viz. above 3.0 mg/l). The maximum fluoride concentration in the block is 5.91 mg/l from Sirsi village. As per the desirable and maximum permissible limit for fluoride in drinking water, determined by World Health Organization or by Bureau of Indian Standards, the groundwater of about 13 habitations of the studied sites is unfit for drinking purposes. Due to the higher fluoride level in drinking water, several cases of dental and skeletal fluorosis have appeared at alarming rate in this region. There is an instant need to take ameliorative steps in this region to prevent the population from fluorosis. Groundwater sources of block Nawa can be used for drinking after an effective treatment in absence of other safe source. The evaluation of various defluoridation methods on the basis of social and economical structure of India reveals that the clay pot chip, activated alumina adsorption, and Nalgonda techniques are the most promising.     

Mercury removal from aqueous solution using petal-like MoS2 nanosheets

• Synthesized few-layered MoS₂ nanosheets via surfactant-assisted hydrothermal method. • Synthesized MoS₂ nanosheets show petal-like morphology. • Adsorbent showed 93% of mercury removal efficiency. • The adsorption of mercury is attributed to negative zeta potential (-21.8 mV). Recently, different nanomaterial-based adsorbents have received greater attention for the removal of environmental pollutants, specifically heavy metals from aqueous media. In this work, we synthesized few-layered MoS₂ nanosheets via a surfactant-assisted hydrothermal method and utilized them as an efficient adsorbent for the removal of mercury from aqueous media. The synthesized MoS₂ nanosheets showed petal-like morphology as confirmed by scanning electron microscope and high-resolution transmission electron microscopic analysis. The average thickness of the nanosheets is found to be about 57 nm. Possessing high stability and negative zeta potential makes this material suitable for efficient adsorption of mercury from aqueous media. The adsorption efficiency of the adsorbent was investigated as a function of pH, contact time and adsorbent dose. The kinetics of adsorption and reusability potential of the adsorbent were also performed. A pseudo-second-order kinetics for mercury adsorption was observed. As prepared MoS₂ nanosheets showed 93% mercury removal efficiency, whereas regenerated adsorbent showed 91% and 79% removal efficiency in the respective 2^nd and 3^rd cycles. The adsorption capacity of the adsorbent was found to be 289 mg/g at room temperature.     

Aerosol size distribution and mass concentration measurements in various cities of Pakistan

During March and April 2010 aerosol inventories from four large cities in Pakistan were assessed in terms of particle size distributions (N), mass (M) concentrations, and particulate matter (PM) concentrations. These M and PM concentrations were obtained for Karachi, Lahore, Rawalpindi, and Peshawar from N concentrations using a native algorithm based on the Grimm model 1.109 dust monitor. The results have confirmed high N, M and PM concentrations in all four cities. They also revealed major contributions to the aerosol concentrations from the re-suspension of road dust, from sea salt aerosols, and from vehicular and industrial emissions. During the study period the 24 hour average PM(10) concentrations for three sites in Karachi were found to be 461 μg m(-3), 270 μg m(-3), and 88 μg m(-3), while the average values for Lahore, Rawalpindi and Peshawar were 198 μg m(-3), 448 μg m(-3), and 540 μg m(-3), respectively. The corresponding 24 hour average PM(2.5) concentrations were 185 μg m(-3), 151 μg m(-3), and 60 μg m(-3) for the three sites in Karachi, and 91 μg m(-3), 140 μg m(-3), and 160 μg m(-3) for Lahore, Rawalpindi and Peshawar, respectively. The low PM(2.5)/PM(10) ratios revealed a high proportion of coarser particles, which are likely to have originated from (a) traffic, (b) other combustion sources, and (c) the re-suspension of road dust. Our calculated 24 hour averaged PM(10) and PM(2.5) concentrations at all sampling points were between 2 and 10 times higher than the maximum PM concentrations recommended by the WHO guidelines. The aerosol samples collected were analyzed for crustal elements (Al, Fe, Si, Mg, Ca) and trace elements (B, Ba, Cr, Cu, K, Na, Mn, Ni, P, Pb, S, Sr, Cd, Ti, Zn and Zr). The averaged concentrations for crustal elements ranged from 1.02 ± 0.76 μg m(-3) for Si at the Sea View location in Karachi to 74.96 ± 7.39 μg m(-3) for Ca in Rawalpindi, and averaged concentrations for trace elements varied from 7.0 ± 0.75 ng m(-3) for B from the SUPARCO location in Karachi to 17.84 ± 0.30 μg m(-3) for Na at the M. A. Jinnah Road location, also in Karachi.     

Financial development,international trade,and environmental degradation: a nonlinear threshold model based on panel smooth transition regression

Environmental Science and Pollution Research - Environmental degradation has severely affected the natural cycle of ecosystem. It’s high time now and humans should execute strategies...     

An empirical investigation of nuclear energy and environmental pollution nexus in India: fresh evidence using NARDL approach

Environmental Science and Pollution Research - Environmental pollution caused by carbon emissions is an emerging issue to study among researchers. The nexus between environmental pollution and...     

Role of ROS generation in acute genotoxicity of azoxystrobin fungicide on freshwater snail Lymnaea luteola L

Environmental Science and Pollution Research - Azoxystrobin (AZ) is an aryloxy pyrimidine fungicide extensively applied in the agriculture field all over the world. There is a little information...     

Nexus between green logistic operations and triple bottom line: evidence from infrastructure-led Chinese outward foreign direct investment in Belt and Road host countries

Environmental Science and Pollution Research - The Belt and Road initiative (BRI) mainly relies on the traditional and underdeveloped logistical trade routes including the terrestrial and oceanic...     

Rethinking resilience and development: A coevolutionary perspective

The interdependence of social and ecological processes is broadly acknowledged in the pursuit to enhance human wellbeing and prosperity for all. Yet, development interventions continue to prioritise economic development and short-term goals with little consideration of social-ecological interdependencies, ultimately undermining resilience and therefore efforts to deliver development outcomes. We propose and advance a coevolutionary perspective for rethinking development and its relationship to resilience. The perspective rests on three propositions: (1) social-ecological relationships coevolve through processes of variation, selection and retention, which are manifest in practices; (2) resilience is the capacity to filter practices (i.e. to influence what is selected and retained); and (3) development is a coevolutionary process shaping pathways of persistence, adaptation or transformation. Development interventions affect and are affected by social–ecological relationships and their coevolutionary dynamics, with consequences for resilience, often with perverse outcomes. A coevolutionary approach enables development interventions to better consider social–ecological interdependencies and dynamics. Adopting a coevolutionary perspective, which we illustrate with a case on agricultural biodiversity, encourages a radical rethinking of how resilience and development are conceptualised and practiced across global to local scales.