Wastewater Reuse Practices in Kuwait

Water is a scarce commodity in Kuwait. With rapid growth of population coupled with increasing urbanization and agriculture, the demand for water in Kuwait is continually on the increase. The main water source in the country is from desalination with small quantities from underground aquifers. Wastewater effluent at least for irrigation purposes, could be a valuable source to augment this dwindling water supply, and should not continue to be wasted. Reuse of wastewater effluent could both minimize the disposal of water to the environment and reduce the demand on fresh water supplies. This paper discusses the features of reuse, the processes used and standards adopted. Design data, operational results, and physical characteristics for the three wastewater treatment plants (Ardiya, Jahra, and Riqqa) in Kuwait are discussed. In addition, the paper reports on the results of a research study undertaken to determine the willingness, level of awareness and knowledge among the people of Kuwait in using wastewater effluent for different purposes. Cost and benefit analyses were conducted on wastewater effluent and reuse. The study concludes with useful recommendations to both the authorities and the citizens of Kuwait.     

A Method for Measuring Degradation of Individual Components in Multicomponent Biodegradable Plastics by Fourier Transform Infrared Spectrometry

A new chemometric method based on Beer's law was derived that uses peak ratios from Fourier transform infrared spectra of neat polymers and their composite plastics to quantify degradation of the individual polymers after biodegradation. The method affords direct measurement of polymer concentrations and weight losses without prior calibration against known composites. Unlike traditional chemometric methods, this method does not require sampling of as many or more different composites as the number of polymers in the composite being analyzed. When the neat polymer spectra are known, only two measurements, one before and one after biodegradation, are needed. A potentially major advance is that the method allows automation of analytical infrared wavelength selection by computer from all possible wavelength combinations. In this paper, the theoretical basis and derivation of the mathematical model for multicomponent systems is presented. The validity of the model was proved initially by applying the method to simulated two-polymer and three-polymer composites and finally by comparing test results with known samples of biodegradable composites prepared in the laboratory. Potential future development of the method for more challenging multicomponent plastics is discussed.     

Use of activated Chromolaena odorata biomass for the removal of crystal violet from aqueous solution: kinetic,equilibrium, and thermodynamic study

Environmental Science and Pollution Research - In the present study, biomass from the Chromolaena odorata plant’s stem was activated using sulfuric acid to adsorb crystal violet (CV) dye. The...     

Stimulating environmental performance via green human resource management,green transformational leadership,and green innovation: a mediation-moderation model

Environmental Science and Pollution Research - This study aims to evaluate the environmental performance of small and medium-sized enterprises (SMEs) through green human resource...     

Effectiveness of novel and traditional treatments on the performance of incinerator bottom ash waste

Management of natural aggregate resources has become one of the most important challenges in construction, especially for high demand applications such as roads. Incinerator bottom ash (IBA), which is produced from burning domestic waste, has been considered a useful solution to the shortage of natural resources. In this research, IBA was mixed with limestone to produce an acceptable blend for use as a road foundation layer. Novel and traditional additives were adopted to improve the mechanical properties of IBA blends. The study focused on the treatment effect of additives on the mechanical characteristics of IBA blends under monotonic and cyclic triaxial stresses. The investigation evaluated fundamental material properties, including resilient modulus, initial Young's modulus and Poisson's ratio. Two nonlinear empirical models were adopted to depict the experimental resilient modulus results of the IBA blends. An approach has been proposed to predict realistic and representative values of resilient modulus for the material. In addition, a new relationship has been established between Young's modulus, resilient modulus and Poisson's ratio. Triaxial test results revealed that additives are more efficient with the control limestone blend than with the IBA blends. Novel additives, such as enzyme I and silica fume, produced a noticeable improvement in IBA properties in comparison to traditional additives.     

Comparison of floating-bed wetland and gravel filter amended with limestone and sawdust for sewage treatment

Environmental Science and Pollution Research - Advancements in the design and technology of constructed wetlands for efficient removal of wastewater contaminants are ever in progress to develop...     

Experimental investigation of dust pollutants and the impact of environmental parameters on PV performance: an experimental study

The accumulation of dust pollution on the photovoltaic (PV) module can have a significant effect on the productivity and efficiency of PV systems in different locations in the world. Dust which accumulated over time on the PV module and is based on weather conditions led to the reduction in the effectiveness of solar cells. The aim of this research was to experimentally investigate the effect of the natural dust and the effects of environmental parameters on PV performance. The experiments were conducted to propose a model for the current, voltage, power and efficiency and to simulate the effect of environmental parameters on PV performance. The natural dust investigated consisted of different compounds: SiO₂ (45.53 %), CaO (24.62 %), Al₂O₃ (10.83 %), Fe₂O₃ (10.46 %), MgO (6.33 %), K₂O (0.87 %), TiO₂ (0.45 %), SO₃ (0.24 %), MnO₂ (0.21), Cr₂O₃ (0.23 %), SrO (0.13 %) and NiO (0.09 %). It was found that the most accurate correlation is a polynomial from seventh degree for current, voltage, power and efficiency, fourth degree for solar radiation and temperature, cubic degree for humidity and wind velocity. The coefficients of general model are 0.6343, 0.0110, 0.0 and 0.0001 for PV module, respectively, with 0.0011 fitting factor. The proposed model has been validated using models in the literature.     

Does Globalisation Worsen Environmental Quality in Developed Economies?

We examine the causal relationship between globalisation and CO₂ emissions for 25 developed economies in Asia, North America, Western Europe and Oceania using both time series and panel data techniques, spanning the annual data period of 1970–2014. Because of the presence of cross-sectional dependence in the panel, we employ Pesaran’s Journal of Applied Econometrics 22, 265–312 (2007) cross-sectional augmented panel unit root (CIPS) test to ascertain unit root properties. The Westerlund Oxford Bulletin of Economics and Statistics 69, 709–748 (2007) cointegration test is also used to ascertain the presence of a long-run association between globalisation and carbon emissions. The long-run heterogeneous panel elasticities are estimated using the Pesaran Econometrica, 74(4), 967–1012 (2006) common correlated effect mean group (CCEMG) estimator and the Eberhardt and Teal Productivity analysis in global manufacturing production (2010) augmented mean group (AMG) estimator. The causality between the variables is examined by employing the Dumitrescu and Hurlin Economic Modelling, 29, 1450–1460 (2012) and Emirmahmutoglu and Kose Economic Modelling, 28, 870–876 (2011) Granger causality tests. The empirical results reveal that globalisation increases carbon emissions, and thus, the globalisation-driven carbon emission hypothesis is valid. This empirical analysis suggests insightful policy guidelines for policy makers using ‘globalisation’ as an economic tool for better long-run environmental policy.     

Effects of fertilization on phosphorus distribution in water-stable aggregates of soils with different properties

Aggregation in agricultural soils is considered as an important physical process affected by fertilizers or manure addition. Therefore, the effects of two fertilizers, mineral and manure were assessed using three soils and correlate the soil properties on phosphorus distribution in water-stable aggregate (WSA). Application of manure increased the proportion of WSA (>5 mm) in all soil types, and mineral fertilizer (MF) slightly increased the proportion of microaggregates in entisols and isohumosols. Both fertilizers increased total phosphorus in all WSA sizes, and the highest values were observed in those of ferrosols and isohumosols. In entisols, the highest total phosphorus value was found in microaggregates in water-soluble form. Manure enhanced the organic phosphorus in all soil types, and MF resulted in enrichment of organic phosphorus in WSA (<2 mm) of entisols.     

Switching behaviors toward green brands: evidence from emerging economy

The aim of the current research was to recognize consumer attitude gap toward green brand by studying role of green consumer value and green brand equity toward the switching intention and purchase intention of consumers toward green brands. The current research employed quantitative research design and collected data through questionnaire from 331 respondents. The PLS-structural equation modeling was employed to analyze the structured relationships. The findings suggest green customer value is product of the three important factors namely green brand experiential risk, green brand experiential quality and green brand experience. Hence, these act as the main drivers of switching consumer behavioral intention toward the green products through consumer green brand equity. The research attempts to study the attitude–behavior gap in the green marketing literature by investigating the role which includes, green brand experiential risk, green brand experiential quality and green brand experience on customer value leading to green brand equity. The research provide an in-depth understating of attitude–behavior gaps and role of green customer value and brand equity that plays vital role in marketing campaigns and policy making to increase purchase intention of green eco-conscious products.