Spatial variation of salts in a Gyanpur canal command area

This study was aimed to establish background and reference values of total heavy metals in soils from a representative area of Albania (Tirana). Thirty-eight soil samples collected from genetic horizons of major soil types of Tirana were analyzed for important physicochemical properties by standard methods and for total contents of Cd, Cr, Ni, Pb, Zn, and Cu by atomic absorption spectrometer, after extraction with aqua regia. The results showed that the total contents of Cd, Cr, Ni, Pb, Zn, and Cu in surface horizons varied widely with respective mean values of 0.3 (??0.6), 174.2 (??63.7), 305.9 (??133.0), 19.7 (??12.4), 95.5 (??26.3), and 42.7 (??6.8) mg/kg. The highest metal contents were found in two soils developed in limestone. The depth distribution of metals showed a tendency for accumulation of Cd and Pb in the surface horizons of three soils, suggesting that these metals partially come from anthropogenic inputs. Correlation analysis indicated that the metal contents of soils were controlled by soil properties, including pH, CaCO₃, clay, organic matter, cation exchange capacity, and Fe oxides. The background values (given as the 90th percentile) were much higher than those reported in the literature, showing that the levels of respective metals were naturally higher. The total metal contents of some soils were above background levels, suggesting metal pollution. The reference values for all the analyzed metals were quite consistent with those of the Dutch system. The proposed background and reference values can be used to evaluate the soil pollution with these elements.     

Effects of DDT and piperonyl butoxide on the metabolic alterations in pigeon (columba livia)

Abstract

Effect of acute doses of technical grade of dichloro diphenyl trichloro ethane (DDT) and piperonyl butoxide (PB) on hepatic micro‐somal cytochrome P₄₅₀ (Cyt. P450) and cytosolic glutathione‐S‐transferase (GST) activity in pigeon were studied after 24 hours of treatment. A completely reverse trend of changes in Cyt. P450 and GST activity were found as increase in Cyt. ?450 paralleled with decrease in GST activity following exposure to DDT. However, intensity of changes in Cyt. P450 was greater than that of GST. A dose dependent decrease in Cyt. ?450 and GST activity was observed after PB treatment. The study may, therefore, throw some light on metabolic alterations in wild birds resulting from environmental pollution by DDT and allied chemicals.     

Batch and continuous biosorption of Cu by immobilized biomass of Arthrobacter sp.

The ability of free and polysulphone immobilized biomass of Arthrobacter sp. to remove Cu²⁺ ions from aqueous solution was studied in batch and continuous systems. The Langmuir and Freundlich isotherm models were applied to the data. The Langmuir isotherm model was found to fit the sorption data indicating that sorption was monolayer and uptake capacity (Q^o) was 175.87 and 158.7 mg/g for free and immobilized biomass respectively at pH 5.0 and 30 °C temperature, which was also confirmed by a high correlation coefficient, a low RMSE and a low Chi-square value. A kinetic study was carried out with pseudo-first-order reaction and pseudo-second-order reaction equations and it was found that the Cu²⁺ uptake process followed the pseudo-second-order rate expression. The diffusivity of Cu²⁺ on immobilized beads increased (0.402 × 10⁻⁴ to 0.435 × 10⁻⁴ cm²/s) with increasing concentration from 50 to 150 mg/L. The maximum percentage Cu²⁺ removal (89.56%) and uptake (32.64 mg/g) were found at 3.5 mL/min and 20 cm bed height. In addition to this the Bed Depth Service Time (BDST) model was in good agreement with the experimental data with a high correlation coefficient (>0.995). Furthermore, sorption and desorption studies were also carried out which showed that polysulphone immobilized biomass could be reused for up to six sorption–desorption cycles.     

Formation of organic tracers for isoprene SOA under acidic conditions

The chemical compositions of a series of secondary organic aerosol (SOA) samples, formed by irradiating mixtures of isoprene and NO in a smog chamber in the absence or presence of acidic aerosols, were analyzed using derivatization-based GC–MS methods. In addition to the known isoprene photooxidation products 2-methylglyceric acid, 2-methylthreitol, and 2-methylerythritol, three other peaks of note were detected: one of these was consistent with a silylated-derivative of sulfuric acid, while the remaining two were other oxidized organic compounds detected only when acidic aerosol was present. These two oxidation products were also detected in field samples, and their presence was found to be dependent on both the apparent degree of aerosol acidity as well as the availability of isoprene aerosol. The average concentrations of the sum of these two compounds in the ambient PM_2.5 samples ranged from below the GC–MS detection limit during periods when the isoprene emission rate or apparent acidity were low to approximately 200 ng m^?3 (calibrations being based on a surrogate compound) during periods of high isoprene emissions. These compounds presently unidentified have the potential to serve as organic tracers of isoprene SOA formed exclusively in the presence of acidic aerosol and may also be useful in assessments in determining the importance and impact of aerosol acidity on ambient SOA formation.     

Contribution of primary and secondary sources to organic aerosol and PM2.5 at SEARCH network sites

Chemical tracer methods for determining contributions to primary organic aerosol (POA) are fairly well established, whereas similar techniques for secondary organic aerosol (SOA), inherently complicated by time-dependent atmospheric processes, are only beginning to be studied. Laboratory chamber experiments provide insights into the precursors of SOA, but field data must be used to test the approaches. This study investigates primary and secondary sources of organic carbon (OC) and determines their mass contribution to particulate matter 2.5 microm or less in aerodynamic diameter (PM2.5) in Southeastern Aerosol Research and Characterization (SEARCH) network samples. Filter samples were taken during 20 24-hr periods between May and August 2005 at SEARCH sites in Atlanta, GA (JST); Birmingham, AL (BHM); Centerville, AL (CTR); and Pensacola, FL (PNS) and analyzed for organic tracers by gas chromatography-mass spectrometry. Contribution to primary OC was made using a chemical mass balance method and to secondary OC using a mass fraction method. Aerosol masses were reconstructed from the contributions of POA, SOA, elemental carbon, inorganic ions (sulfate [SO4(2-)], nitrate [NO3-], ammonium [NH4+]), metals, and metal oxides and compared with the measured PM2.5. From the analysis, OC contributions from seven primary sources and four secondary sources were determined. The major primary sources of carbon were from wood combustion, diesel and gasoline exhaust, and meat cooking; major secondary sources were from isoprene and monoterpenes with minor contributions from toluene and beta-caryophyllene SOA. Mass concentrations at the four sites were determined using source-specific organic mass (OM)-to-OC ratios and gave values in the range of 12-42 microg m(-3). Reconstructed masses at three of the sites (JST, CTR, PNS) ranged from 87 to 91% of the measured PM2.5 mass. The reconstructed mass at the BHM site exceeded the measured mass by approximately 25%. The difference between the reconstructed and measured PM2.5 mass for nonindustrial areas is consistent with not including aerosol liquid water or other sources of organic aerosol.     

Organic matter content of sediments in continental shelf area of southeast coast of India

Total organic matter (TOM) content of sediment samples collected from various depths of continental shelf region of the southeast coast of India varied from 0.19% to 7.73%. Higher TOM content and lower median particle diameter could be attributed to the influence of higher riverine flow. Higher values were observed at 100?m depth and above (average 5.29%) and lower values in shallower depths below 100?m (average 3.07%). In the Principal Coordinate Analysis (PCO), the first two axes explained about 83.1% of the total variability. The direction of the vector representing total organic matter was towards 150?m depth. In the Canonical Analysis of Principal Coordinates (CAP) done to confirm the above pattern, the canonical correlation value obtained for the first axis was high (0.9999). The same for the second axis was 0.9995. The direction of the axis representing TOM in this analysis was towards the 100?m depth truly reflecting higher TOM level recorded here (average TOM at 100?m depth—5.81% and at 150?m depth—5.33%). The percentage of samples allocated to the correct group in CAP was 91.67% (33 out of the 36 samples). As the allocation success of samples is substantially greater around 92%, the CAP is explaining greater percentage of variability of TOM than PCO and was found to be quite useful for studies of this nature.     

Factors affecting vehicle exhaust emissions,driver motivations as a mediator

Environmental Economics and Policy Studies - Reducing the negative effects of vehicle emissions is one of the main priorities for governments worldwide. Comprehensive understanding of the costs and...     

Modelling the connection between energy consumption and carbon emissions in North Africa: Evidence from panel models robust to cross-sectional dependence and slope heterogeneity

Environment, Development and Sustainability - This paper explored the link between energy consumption and carbon emissions in North Africa through an Environmental Kuznets Curve (EKC) framework....     

The potential effect of temperature-humidity index on productive and reproductive performance of buffaloes with different genotypes under hot conditions

The current study was aimed to investigate the impact of THI on productive and reproductive indices of PE and F₁ crosses (50% PE and 50% Italian buffaloes) and back crosses (BC) (75% PE and 25% Italian buffaloes) under hot conditions. In this study, 8385 records used PE (1914, 1518, and 1737), F₁ (387, 447, and 657), and BC (495, 585, and 645) for low, medium, and high THI, respectively. The high THI reduced the conception rate after first insemination in PE, F₁, and BC ((odds ratio, OR) = 1.187, P = 0.007; 2.361, <0.0001 and 1.603, <0.0001, respectively) when compared with low THI. But, stillbirth and calving condition were not significantly influenced by different THI levels in BC and F₁. BC was more bearable to the harsh environment; they possessed the highest incidence of conception after first insemination (72.70, 72.60, and 62.40%), producing live calves (98.50, 100, and 99.40%) with easy calving condition (98.50, 100, and 99.40%) when compared to PE and F₁ at different levels of THI, respectively. The average daily milk yield and peak of milk production were decreased in PE (4.02 and 5.12%), BC (13.33 and 10.95%), and F₁ (25.29 and 12.20%) from low to high THI. However, BC revealed no significant changes in days open, dry period, calving interval, gestation length, service per conception, and the first service post-partum at different levels of THI when compared with PE and F₁. Therefore, rearing BC is recommended for improving buffalo productive and reproductive performance under hot conditions.