Effects of sewage sludge biochar on plant metal availability after application to a Mediterranean soil

Pyrolytic conversion of sewage sludge into biochar could be a sustainable management option for Mediterranean agricultural soils. The aim of this work is to evaluate the effects of biochar from sewage sludge pyrolysis on soil properties; heavy metals solubility and bioavailability in a Mediterranean agricultural soil and compared with those of raw sewage sludge. Biochar (B) was prepared by pyrolysis of selected sewage sludge (SL) at 500 °C. The pyrolysis process decreased the plant-available of Cu, Ni, Zn and Pb, the mobile forms of Cu, Ni, Zn, Cd and Pb and also the risk of leaching of Cu, Ni, Zn and Cd. A selected Mediterranean soil was amended with SL and B at two different rates in mass: 4% and 8%. The incubation experiment (200 d) was conducted in order to study carbon mineralization and trace metal solubility and bioavailability of these treatments. Both types of amendments increased soil respiration with respect to the control soil. The increase was lower in the case of B than when SL was directly added. Metals mobility was studied in soil after the incubation and it can be established that the risk of leaching of Cu, Ni and Zn were lower in the soil treated with biochar that in sewage sludge treatment. Biochar amended samples also reduced plant availability of Ni, Zn, Cd and Pb when compared to sewage sludge amended samples.     

Estimation of hydrogen sulfide emission rates at several wastewater treatment plants through experimental concentration measurements and dispersion modeling

The management and operation of wastewater treatment plants (WWTP) usually involve the release into the atmosphere of malodorous substances with the potential to reduce the quality of life of people living nearby. In this type of facility, anaerobic degradation processes contribute to the generation of hydrogen sulfide (H2S), often at quite high concentrations; thus, the presence of this chemical compound in the atmosphere can be a good indicator of the occurrence and intensity of the olfactory impact in a specific area. The present paper describes the experimental and modelling work being carried out by CEAM-UMH in the surroundings of several wastewater treatment plants located in the Valencia Autonomous Community (Spain). This work has permitted the estimation of H2S emission rates at different WWTPs under different environmental and operating conditions. Our methodological approach for analyzing and describing the most relevant aspects of the olfactory impact consisted of several experimental campaigns involving intensive field measurements using passive samplers in the vicinity of several WWTPs, in combination with numerical simulation results from a diagnostic dispersion model. A meteorological tower at each WWTP provided the input values for the dispersion code, ensuring a good fit of the advective component and therefore more confidence in the modelled concentration field in response to environmental conditions. Then, comparisons between simulated and experimental H2S concentrations yielded estimates of the global emission rate for this substance at several WWTPs at different time periods. The results obtained show a certain degree of temporal and spatial (between-plant) variability (possibly due to both operational and environmental conditions). Nevertheless, and more importantly, the results show a high degree of uniformity in the estimates, which consistently stay within the same order of magnitude.     

The synthetic pyrethroid isomers II. Biological activity

Abstract

Pure optical isomers of phenothrin, permethin and cypermethrin were synthesised and tested on a wide spectrum of insects (Blattella germanica, Leptinotarsa decemlineata, Tribolium confusum, Oncopeltus fasciatus, Musca domestica, Aedes aegypti). Our results suggest that in the structurally related series phenothrin, permethrin and cypermethrin the chemical modifications had only a small influence on intrinsic activity of the compounds at the target site. The activity of piperonylbutoxide synergised 1Rtrans phenothrin and 1Rcis permethrin (LD₅₀=1.2 ng/fly in both cases) is in a similar range to the most active 1RcisS cypermethrin isomer alone or with PB (LD₅₀=0.9 and 0.4 ng/fly, respectively). Some cypermethrin isomers considered previously to be totally inactive show significant activity depending on the tested insect species. The 1ReisR and 1RtransR isomers proved to be as active as the most potent isomers on mosquito. A similarly unexpected result was that in the case of mosquito all four trans isomers were significantly more active than the corresponding eis isomers.

The superiority of the (S)‐α configuration over (R)‐α was found. It does not result from a higher intrinsic activity at the target site, but rather from the enhanced metabolic resistance of (S)‐α‐esters to ester cleavage as confirmed by Synergist studies. The activity of the two most potent stereoisomers, 1ReisS and 1RtransS, could not be elevated by quinalphos, while the inactive 1ScisR and 1StransR isomers showed significant activity with the esterase inhibitor quinalphos administered sublethally.

In contrast with the antagonism between (S)‐ and (R)‐α‐epimers of cypermethrin reported earlier a considerable synergism was observed between 1RtransS and 1StransR enantiomer pair on flour beetle and housefly in tarsal contact tests.

The results with stereoisomers and their mixtures were utilised in the development of two new products, Chinmix (beta‐cypermetrhin) and Transmix (theta‐cypermetrhin).     

Nature of the field-to-field distribution of pesticide residues

The supervised trial datasets (1950), consisting of a minimum of five residue values and selected by the experts of FAO/WHO Joint Meeting on Pesticide Residues for recommending maximum residue levels between 1997 and 2011, were evaluated to obtain information on the typical spread of residue values in individual datasets. The typical relative standard deviation, CV, of field-to-field variation of pesticide residues was about 80%. The spread of residues in datasets is independent from the chemical structure of pesticides, residue level, pre-harvest interval and number of values in the datasets. The CV ranges within the Codex commodity groups and between groups overlapped and their difference were not statistically significant. The number of residues below the limit of quantification (LOQ) affects the CV at various extents depending on the ratio of LOQ/R _mean. The combined uncertainty of the highest residue in a dataset significantly affects the CV of the dataset. The lowest and intermediate ones have less influence. The residues in different fields receiving the same treatment vary within large range: 55%, 72%, 78%, 86% and 89% of the 25,766 residues values were, respectively, within 3, 4, 5, 6 and 7 times the median value of the corresponding dataset.     

Multivariant statistical analysis of PCDD/FS in sewage sludges from different areas of the Valencian Community (Spain)

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in 31 sewage sludges from different wastewater treatment plants corresponding to rural, urban and industrial areas in the Valencian Community (Spain) were analysed. Values of 5.1-346.2 ng I-TEQ kg(-1) (dry weight) were detected for sewage sludge with the highest value in one sample from an industrial area. Therefore the majority of the samples did not exceed the limit proposed (100 ng I-TEQ kg(-1)) by the [EU, 2000. Working document on sludge, 3rd draft. Brussels. Available from: http://europa.eu.int/comm/environment/waste/sludge/sludge_en.pdf] for use in agriculture. The dominant congeners for each family of compounds were 1,2,3,4,6,7,8-HpCDD and OCDD from PCDDs, and 1,2,3,4,6,7,8-HpCDF and OCDF from PCDFs. The total concentrations of PCDD/Fs were evaluated statistically through SPPS 11.0 for Windows. The principal component analysis (PCA) was used to extract two PCs as a linear combination of the original variables, one of them associated to urban+highly industrial areas and the other one to urban+low industrial areas. The linear regression method was applied and an efficient correlation was obtained between the total I-TEQ values for each sample and two of most abundant congeners (OCDF and OCDD). This expression was obtained with the results of the 31 samples analysed and a variety of data from other authors. Furthermore, several bilateral correlations between the different congeners completed the statistical analysis.     

Changes in elemental uptake and arbuscular mycorrhizal colonisation during the life cycle of Thlaspi praecox Wulfen

Elemental uptake and arbuscular mycorrhizal (AM) colonisation were studied during the life cycle of field collected Cd/Zn hyperaccumulating Thlaspi praecox (Brassicaceae). Plant biomass and tissue concentrations of Cd, Pb, Zn, Fe and Ni were found to vary during development, while no variation in P, K, Ca, Mn and Cu tissue concentrations were observed. The lowest Cd bioaccumulation in rosette leaves (BAF(RL)) observed during seeding was partially attributed to lower translocation from roots to rosette leaves and partially to high translocation to stalks, indicating a high Cd mobility to reproductive tissues, in line with our previous studies. The highest intensity of AM colonisation (M%) was observed in the flowering phase and was accompanied by increased root Cd, Zn, Pb and Fe contents. In addition, a positive correlation between AM colonisation and Fe contents in rosette leaves was found. The results indicate developmental dependence of AM formation, accompanied by selective changes in nutrient acquisition in T. praecox that are related to increased plant needs, and the protective role of AM colonisation on metal polluted sites during the reproductive period.     

Phosphate complexation model and its implications for chemical phosphorus removal

A phosphate complexation model is developed, in an attempt to understand the mechanistic basis of chemically mediated phosphate removal. The model presented here is based on geochemical reaction modeling techniques and uses known surface reactions possible on hydrous ferric oxide (HFO). The types of surface reactions and their reaction stoichiometry and binding energies (logK values) are taken from literature models of phosphate interactions with iron oxides. The most important modeling parameter is the proportionality of converting moles of precipitated HFO to reactive site density. For well-mixed systems and phosphate exposed to ferric chloride during HFO precipitation, there is a phosphate capacity of 1.18 phosphate ions per iron atom. In poorly mixed systems with phosphate exposed to iron after HFO formation, the capacity decreased to 25% of the well-mixed value. The same surface complexation model can describe multiple data sets, by varying only a single parameter proportional to the availability of reactive oxygen functional groups. This reflects the unavailability of reactive oxygen groups to bind phosphate. Electron microscope images and dye adsorption experiments demonstrate changes in reactive surface area with aging of HFO particles. Engineering implications of the model/mechanism are highlighted.     

Occurrence and fate of alkylphenols and alkylphenol ethoxylates in sewage treatment plants and impact on receiving waters along the Ter River (Catalonia, NE Spain)

The partitioning of alkylphenols in the dissolved and particulate matter of influents, effluents, accumulation onto sludge and the impact of sewage treatment plant upon receiving waters was studied along the Ter River basin (Catalonia, NE Spain). A solid-phase extraction or pressurized liquid extraction followed by liquid chromatography-mass spectrometry was developed and permitted to determine target compounds with high efficiency in waters, particulate material and sludge. Nonylphenol mono- and diethoxylate, nonylphenol and octylphenol partitioned preferably upon particulate matter and sludge, whereas long chain NPE(3-15)O prevailed in the dissolved phase and was released by effluents. Within the treatment process, a net accumulation of alkylphenols in sludge was found, producing up to 148g/t/month. The removal efficiency of alkylphenols was of 37-90% and depended on the treatment. Assessment on the fate of these contaminants within STPs is discussed in terms of flow rates, biological oxygen demand and tons of sludge produced.     

Predator-prey interactions between Synbranchus marmoratus (Teleostei: Synbranchidae) and Hypsiboas pulchellus tadpoles (Amphibia: Hylidae): importance of lateral line in nocturnal predation and effects of fenitrothion exposure

Environmental contaminants can disrupt interactions between aquatic species by altering community structure. We explored predator-prey interactions between marbled swamp juvenile eels (Synbranchus marmoratus; predator) and anuran tadpoles (Hypsiboas pulchellus; prey) in relation to two aspects: the importance of lateral line in the predator and whether the absence of light modifies predation rates; and the effect of a sub-lethal concentration of fenitrothion on both predator and prey. Eels were tested under two sensory conditions (lateral line intact and lateral line blocked by cobalt chloride) in dark conditions. Predation rates were evaluated using different treatments that combined predator and prey exposed or not to insecticide. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were also measured in muscle samples of eels and tadpoles to explore whether fenitrothion affects predator and prey differentially. Marbled swamp eels were more efficient in feeding on tadpoles during the night than during the day, showing that lateral line makes an important contribution to prey detection and capture. Regarding pesticide effects, short-term (6 h) exposure to an ecologically relevant fenitrothion dose of 2.5 mg L(-1) altered the predator-prey relationship by changing prey behaviour, reducing prey detection and therefore increasing tadpole survival. At this concentration, the outcome of the predator-prey relationship appears biased in favor of the exposed tadpoles, which were released from predation risk, despite their altered behaviour and the higher inhibition percentages of tail BChE (70%) and AChE (51%) than in control individuals. Our study involving these model species and agrochemicals demonstrates that fenitrothion affected the outcome of a predator-prey relationship. Further studies are needed, in these species and other native amphibians, to investigate the nature of the mechanisms responsible for the adverse effects of pesticides on antipredator behaviour and predation efficiency.     

Distribution and biological impact of dioxin-like compounds in risk zones along the Ebro River basin (Spain)

The aim of this investigation was to evaluate the environmental impact associated to PCDDs/Fs and dioxin-like PCBs in the Ebro River basin. Sediments and fish from several species were sampled at three sites with different historical pollution records, including the Barbastro area with different industrial activities, and the Flix and Monzón sites, associated to heavy organochlorine compound pollution. Seventeen toxic PCDDs/Fs and 12 dioxin-like PCBs were analyzed by GC-MS. The results obtained indicated significant accumulation of dioxin-like PCBs, but not PCDDs/Fs, in sediments and fish at the Flix site compared to the other sites. Concomitantly, cytochrome p450 1A (CYP1A) expression, a known indicator for pollution by dioxins and dioxin-like PCBs, was significantly elevated in barbel (Barbus graellsii) from the Flix site, compared to the population from the Barbastro site. CYP1A expression correlated with the concentration of dioxin-like PCBs in the fish fat, whereas no significant correlation was found with PCDDs/Fs concentrations. Our data suggest a significant biological impact at the Flix site, closely related to the presence of dioxin-like PCBs, whereas the PCDDs/Fs contribution to this impact appears to be non-significant, at least in the studied sites.