Assessment of the pollution and ecological risk of lead and cadmium in soils

The aim of the study was to assess the content, distribution, soil binding capacity, and ecological risk of cadmium and lead in the soils of Malopolska (South Poland). The investigation of 320 soil samples from differently used land (grassland, arable land, forest, wasteland) revealed a very high variation in the metal content in the soils. The pollution of soils with cadmium and lead is moderate. Generally, a point source of lead and cadmium pollution was noted in the study area. The highest content of cadmium and lead was found in the northwestern part of the area—the industrial zones (mining and metallurgical activity). These findings are confirmed by the arrangement of semivariogram surfaces and bivariate Moran’s correlation coefficients. Among the different types of land use, forest soils had by far the highest mean content of bioavailable forms of both metals. The results showed a higher soil binding capacity for lead than for cadmium. However, for both metals, extremely high (class 5) accumulation capacities were dominant. Based on the results, the investigated soils had a low (Pb) and moderate (Cd) ecological risk on living components. Soil properties, such as organic C, pH, sand, silt, and clay content, correlated with the content of total and bioavailable forms of metals in the soils. The correlations, despite being statistically significant, were characterized by very low values of correlation coefficient (r?=?0.12–0.20, at p?≤?0.05). Therefore, the obtained data do not allow to define any conclusions as to the relationships between these soil properties. However, it must be highlighted that there was a very strong positive correlation between the total content of cadmium and lead and their bioavailable forms in the soils.     

Accuracy of assessing the level of impulse sound from distant sources.

Impulse sound events are characterised by ultra high pressures and low frequencies. Lower frequency sounds are generally less attenuated over a given distance in the atmosphere than higher frequencies. Thus, impulse sounds can be heard over greater distances and will be more affected by the environment. To calculate a long-term average immission level it is necessary to apply weighting factors like the probability of the occurrence of each weather condition during the relevant time period. This means that when measuring impulse noise at a long distance it is necessary to follow environmental parameters in many points along the way sound travels and also to have a database of sound transfer functions in the long term. The paper analyses the uncertainty of immission measurement results of impulse sound from cladding and destroying explosive materials. The influence of environmental conditions on the way sound travels is the focus of this paper.     

Profile of trace elements in Parasol Mushroom (Macrolepiota procera) from Tucholskie Forest

The aim of this study was to determine 19 elements contents and bioconcentration potential in fruiting bodies of Parasol Mushroom (Macrolepiota procera) collected from the Tucholskie Forest complex in Poland. Also discussed were Cd, Pb and Hg contents of edible caps in relation to the current regulatory standards. K, P and Mg were particularly abundant in caps and stipes, median values were 38-49, 13, and 1.6-1.6 mg/g dry weight, and followed by Ca, Na and Rb at 110-540, 44-240 and 20-50 μg/g dw, respectively. Concentrations of Al, Fe, Zn, Cu and Mn were from less than 50 to 180 μg/g dw, while concentrations of other elements were ～l.0?μg/g dw or less. Cu, K, Ag, Cd, Na, Rb, Zn and Hg were bioconcentrated (BCF >1), while Al, Ba, Fe, Mn, Co, Sr, Pb and Cr were not bioaccumulated (BCF <1). Cd and Pb content of Parasol Mushroom's edible caps collected from some sites in the Tucholskie Forest exceed the maximum levels set in the EU for cultivated mushrooms.     

Cities of the future—bionic systems of new urban environment

Environmental Science and Pollution Research - The concepts of the cities we know nowadays, and which we are accustomed to, change at a very rapid pace. The philosophy of their design is also...     

Structural and Thermal Properties of Starch Plasticized with Glycerol/Urea Mixture

Journal of Polymers and the Environment - The paper presents the results of research on the influence of used plasticizing system on the structural and thermal properties of thermoplastic starch...     

Assessment of the content,occurrence, and leachability of arsenic,lead, and thallium in wastes from coal cleaning processes

The aim of the study was to evaluate the content, occurrence, and leachability of arsenic (As), lead (Pb), and thallium (Tl) in wastes from coal cleaning processes with respect to the safe management of this waste. The study focused on wastes resulting from the wet gravitation and flotation processes employed for the purposes of coking coal cleaning in four coal mines situated in the Upper Silesian Coal Basin (Poland). The scope of the study included (i) determination of the content of these elements in the investigated wastes using atomic absorption spectrometry, (ii) evaluation of their mode of occurrence using electron microprobe analysis, and (iii) preliminary assessment of their leachability in deionized water. The content of the analyzed elements in the examined samples of coal waste was twice as high as the average content of these elements in the Earth’s crust. The contents of As and Pb, however, did not exceed their permissible contents in inert waste in accordance with Polish legal regulations based on EU directives. The limit on the content of Tl is not specified by these regulations, but its amount in the examined samples was similar to that occurring in the soils. Moreover, leaching tests have shown that these elements are hardly eluted from the analyzed material. Their content in the water leachates was generally lower than the detection limit of the analytical method, complying with the standards for good and very good water quality. Low leachability of these elements most probably results from their mode of occurrence in the investigated wastes. The chemical analysis using an electron microprobe and the analysis of the correlation between these elements, e.g., total and pyritic sulfur, have shown that Pb, As, and Tl are mainly found in sulfide minerals which are characterized by negligible solubility. In conclusion, the investigated hard coal processing waste does not constitute a threat to the environment and can be commercially used or safely neutralized, e.g., by landfilling.

     

Metals in edible fish from Vistula River and Dead Vistula River channel,Baltic Sea

Metals including Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in muscle tissue of 12 fish species by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and cold vapour-atomic absorption spectroscopy (CV-AAS). Fish were collected from Vistula River at lower course and Dead Vistula River channel in south of Baltic Sea in Poland. The fish species examined include Round Goby (Neogobius melanostomus), Crucian Carp (Carassius carassius), Bull-rout (Myoxocephalus scorpius), Tench (Tinca tinca), Bream (Abramis brama), Burbot (Lota lot), Perch (Perca perca), Roach (Rutilus rutilus), Silver Carp (Hypophthalmichthys molitrix), Pikeperch (Stizostediun lucioperca), Brown salmon (Salmo trutta m. Trutta) and Eel (Anguilla anguilla). The median values of metal concentrations in fresh muscle tissue of 11 fish species varied as follows: Al < 0.5–60; Ba < 0.05–0.31; Ca 120–1800; Cd < 0.05–0.096; Co < 0.10; Cr < 0.10–0.50; Cu < 0.15–0.77; Fe 1.5–21; Hg 0.0058–0.65; K 1800–4200; Mg 130–560; Mn 0.12–0.59; Na 350–840; Ni < 0.2–0.31; Pb < 0.75; Sr 0.079–2.9; Zn 3.3–23 μg/g fresh weight. The Target Hazard Quotient (THQ) values calculated in this study for Cd and Hg from muscles of fish species collected from Vistula River were low in the range of 0.4 for Hg and 0.8 for Cd. Supplemental materials are available for this article. Go to the publisher's online edition of Journal of Environmental Science and Health, Part B to view the free supplemental file.     

Application of chemometric analysis based on physicochemical and chromatographic data for the differentiation origin of plant protection products containing chlorpyrifos

The aim of this study was to investigate the similarities and dissimilarities between the pesticide samples in form of emulsifiable concentrates (EC) formulation containing chlorpyrifos as active ingredient coming from different sources (i.e., shops and wholesales) and also belonging to various series. The results obtained by the Headspace Gas Chromatography–Mass Spectrometry method and also some selected physicochemical properties of examined pesticides including pH, density, stability, active ingredient and water content in pesticides tested were compared using two chemometric methods. Applicability of simple cluster analysis and also principal component analysis of obtained data in differentiation of examined plant protection products coming from different sources was confirmed. It would be advantageous in the routine control of originality and also in the detection of counterfeit pesticides, respectively, among commercially available pesticides containing chlorpyrifos as an active ingredient.     

Aphanizomenon gracile (Nostocales), a cylindrospermopsin-producing cyanobacterium in Polish lakes

The cyanobacterial cytotoxin cylindrospermopsin (CYN) has become increasingly common in fresh waters worldwide. It was originally isolated from Cylindrospermopsis raciborskii in Australia; however, in European waters, its occurrence is associated with other cyanobacterial species belonging to the genera Aphanizomenon and Anabaena. Moreover, cylindrospermopsin-producing strains of widely distributed C. raciborskii have not yet been observed in European waters. The aims of this work were to assess the occurrence of CYN in lakes of western Poland and to identify the CYN producers. The ELISA tests, high-performance liquid chromatography (HPLC)-DAD, and HPLC-mass spectrometry (MS)/MS were conducted to assess the occurrence of CYN in 36 lakes. The cyrJ, cyrA, and pks genes were amplified to identify toxigenic genotypes of cyanobacteria that are capable of producing CYN. The toxicity and toxigenicity of the C. raciborskii and Aphanizomenon gracile strains isolated from the studied lakes were examined. Overall, CYN was detected in 13 lakes using HPLC-MS/MS, and its concentrations varied from trace levels to 3.0 μg?L^?1. CYN was widely observed in lakes of western Poland during the whole summer under different environmental conditions. Mineral forms of nutrients and temperature were related to CYN production. The molecular studies confirmed the presence of toxigenic cyanobacterial populations in all of the samples where CYN was detected. The toxicity and toxigenicity analyses of isolated cyanobacteria strains revealed that A. gracile was the major producer of CYN.