The radiative efficiency of HCF2OCF2OCF2CF2OCF2H (H-Galden 1040x) revisited

The infrared spectrum of HCF₂OCF₂OCF₂CF₂OCF₂H (CAS# 188690-77-9) has been re-measured. The integrated absorption intensity over the range 1000–1500 cm^?1 measured in the present work is (6.65 ± 0.33) × 10^?17 cm² molecule^?1 cm^?1 in 700 Torr of air at 296 K. The radiative efficiency of HCF₂OCF₂OCF₂CF₂OCF₂H is calculated to be 1.02 W m^?2 ppb^?1. The value reported in the 2007 Intergovernmental Panel on Climate Change (IPCC) report is approximately 35% larger reflecting what we believe to be an erroneously high value for the absorption strength of HCF₂OCF₂OCF₂CF₂OCF₂H adopted by the IPCC.     

Effectiveness of a publicly-funded demonstration program to promote management of dryland salinity

Community and catchment-based approaches to salinity management continue to attract interest in Australia. In one such approach, Catchment Demonstration Initiative (CDI) projects were established by the Western Australian (WA) Government in 2000 for targeted investment in large-scale catchment-based demonstrations of integrated salinity management practices. The aim was to promote a process for technically-informed salinity management by landholders. This paper offers an evaluation of the effectiveness of one CDI project in the central wheatbelt of WA, covering issues including: its role in fostering adoption of salinity management options, the role of research and the technical requirements for design and implementation of on-ground works, the role of monitoring and evaluation, the identification and measurement of public and private benefits, comparison and identification of the place and value of plant-based and engineering-based options, reliance on social processes and impacts of constraints on capacity, management of governance and administration requirements and an appreciation of the value of group-based approaches.A number of factors may reduce the effectiveness of CDI-type approaches in facilitating landholder action to address salinity, many of these are socially-based. Such approaches can create considerable demands on landholders, can be expensive (because of the planning and accountability required) on the basis of dollars per hectare impacted, and can be difficult to garner ownership from all involved. An additional problem could be that few community groups would have the capacity to run such programs and disseminate the new knowledge so that the CDI-type projects can impact outside the focus catchment. In common with many publicly-funded approaches to salinity, we found that direct benefits on public assets are smaller than planned and that results from science-based requirements of monitoring and evaluation have long lead times, causing farmers to either wait for the information or act sooner and take risks based on initial results. We also found that often it is a clear outline of the process that is of most importance in decision making as opposed to the actual results. We identified limitations in regulatory processes and the capacity for local government to engage in the CDI.The opportunities that CDI-type approaches provide centre around the value of its group-based approach. We conclude that they can overcome knowledge constraints in managing salinity by fostering group-based learning, offer a structured process of trialling options so that the costs and benefits can be clearly and transparently quantified, and avoid the costly mistakes and “learning failures” of the past.     

Modeling the costs and benefits of dam construction from a multidisciplinary perspective

Although the benefits of dam construction are numerous, particularly in the context of climate change and growing global demand for electricity, recent experience has shown that many dams have serious negative environmental, human, and political consequences. Despite an extensive literature documenting the benefits and costs of dams from a single disciplinary perspective, few studies have simultaneously evaluated the distribution of biophysical, socio-economic, and geopolitical implications of dams. To meet the simultaneous demands for water, energy, and environmental protection well into the future, a broader view of dams is needed. We thus propose a new tool for evaluating the relative costs and benefits of dam construction based on multi-objective planning techniques. The Integrative Dam Assessment Modeling (IDAM) tool is designed to integrate biophysical, socio-economic, and geopolitical perspectives into a single cost/benefit analysis of dam construction. Each of 27 different impacts of dam construction is evaluated both objectively (e.g., flood protection, as measured by RYI years) and subjectively (i.e., the valuation of said flood protection) by a team of decision-makers. By providing a visual representation of the various costs and benefits associated with two or more dams, the IDAM tool allows decision-makers to evaluate alternatives and to articulate priorities associated with a dam project, making the decision process about dams more informed and more transparent. For all of these reasons, we believe that the IDAM tool represents an important evolutionary step in dam evaluation.     

Comparing the impacts of hiking, skiing and horse riding on trail and vegetation in different types of forest

Nature-based tourism in protected areas has increased and diversified dramatically during the last decades. Different recreational activities have a range of impacts on natural environments. This paper reports results from a comparison of the impacts of hiking, cross-country skiing and horse riding on trail characteristics and vegetation in northern Finland. Widths and depths of existing trails, and vegetation on trails and in the neighbouring forests were monitored in two research sites during 2001 and 2002. Trail characteristics and vegetation were clearly related to the recreational activity, research site and forest type. Horse trails were as deep as hiking trails, even though the annual number of users was 150-fold higher on the hiking trails. Simultaneously, cross-country skiing had the least effect on trails due to the protective snow cover during winter. Hiking trail plots had little or no vegetation cover, horse riding trail plots had lower vegetation cover than forest plots, while skiing had no impact on total vegetation cover. On the other hand, on horse riding trails there were more forbs and grasses, many of which did not grow naturally in the forest. These species that were limited to riding trails may change the structure of adjacent plant communities in the long run. Therefore, the type of activities undertaken and the sensitivity of habitats to these activities should be a major consideration in the planning and management of nature-based tourism. Establishment of artificial structures, such as stairs, duckboards and trail cover, or complete closure of the site, may be the only way to protect the most sensitive or deteriorated sites.     

Assessment Tools for Urban Catchments: Defining Observable Biological Potential1

Abstract: Urbanization represents a strong and increasingly more prevalent impact on stream quality worldwide. One of the characteristic effects of increased urbanization is a consistent decline in biological stream condition. The characterization of this biological degradation with increasing urbanization presents a number of advantages for the study and management of urban streams and catchments. In this paper, the limitation of biological condition with urbanization, called observed biological potential, is characterized. Using an urban intensity index and a biological index developed specifically for urban systems in the Baltimore, Maryland; Cleveland, Ohio; and San Jose, California regions, two principal techniques were compared (quantile regression and bin regression) to define observed biological potential along urban gradients. Quantile regression was selected as the preferable tool for describing observed biological potential given the consistency with which it can be applied and its statistical efficiency, however, bin quantile regression performed similarly. Having identified a numeric approximation of observed biological potential, two methods for identifying factors related to distance from potential as a way of identifying critical environmental factors affecting biological condition in urban areas were explored. The results of this work can be used for identifying benchmarks for urban stream biological condition, identifying limiting catchment characteristics, and prioritizing urban stream management efforts.     

Adaptive Management of Stream Channel Maintenance at Bridge Crossings in the Northern Tier Region,Pennsylvania1

Abstract: An adaptive management framework is applied to the problem of identifying mitigation measures for sediment deposition near bridge crossings in small streams in the Northern Tier region of northern Pennsylvania. The presence of the rigid bridge infrastructure introduces a challenge for applying adaptive management practices, because the integrity of the bridge structure itself has to be maintained regardless of the mitigation practices used in the stream channel near the bridge. In an effort to overcome the unacceptable risk that field‐scale adaptive management experiments present to rigid bridge infrastructure, an adaptive management approach for laboratory‐scale experimentation of mitigation methods at bridge crossings in the Northern Tier region is presented as a way to decrease the level of uncertainty about channel response to mitigation measures and increase the rate of learning about the effectiveness of these measures. Four cycles of adaptive management experiments are discussed to demonstrate that this approach results in fast and efficient learning about channel response to mitigation methods for the given conditions. The value of monitoring and of assessment of monitored data in the overall efficiency of the adaptive management approach is highlighted. Assessment of what was learned in the adaptive management experiment cycles presented here leads to new directions to continually improve management policies and practices in stream channels at bridge crossings in the Northern Tier region. The adaptive management process, rather than continuing with a normally risk‐averse management approach, results in opportunities for learning new information about a system’s response.     

Coastal spreading of olivine to control atmospheric CO2 concentrations: A critical analysis of viability

Qualitative proposals to control atmospheric CO₂ concentrations by spreading crushed olivine rock along the Earth's coastlines, thereby accelerating weathering reactions, are presently attracting considerable attention. This paper provides a critical evaluation of the concept, demonstrating quantitatively whether or not it can contribute significantly to CO₂ sequestration. The feasibility of the concept depends on the rate of olivine dissolution, the sequestration capacity of the dominant reaction, and its CO₂ footprint. Kinetics calculations show that offsetting 30% of worldwide 1990 CO₂ emissions by beach weathering means distributing of 5.0 Gt of olivine per year. For mean seawater temperatures of 15–25 °C, olivine sand (300 μm grain size) takes 700–2100 years to reach the necessary steady state sequestration rate and is therefore of little practical value. To obtain useful, steady state CO₂ uptake rates within 15–20 years requires grain sizes <10 μm. However, the preparation and movement of the required material poses major economic, infrastructural and public health questions. We conclude that coastal spreading of olivine is not a viable method of CO₂ sequestration on the scale needed. The method certainly cannot replace CCS technologies as a means of controlling atmospheric CO₂ concentrations.     

De-novo formation of dioxins and furans and the memory effect in waste incineration flue gases

The formation of dioxin (polychlorinated-rho-dibenzodioxins - PCDD) and furan (polychlorinated dibenzofurans - PCDF) in waste incineration flyash in relation to temperature has been investigated in a bench scale reactor. The PCDD/PCDF released into the exhaust gases of the reactor and trapped in a condensation and vapour phase adsorption system were also determined. The concentrations of PCDD/PCDF in the flyash were analysed in detail for all congeners and isomers including the mono-, di- and tri-PCDD/PCDF. De-novo synthesis of PCDD/PCDF was clearly seen in the flyash with large changes in concentrations of PCDD/PCDF with only small changes in temperature. Exhaust gas PCDD/PCDF were detected at all temperatures, with the maximum emission occurring at a flyash temperature of 350 degrees C, where the equivalent of over 42 times the total dioxin/furan concentration of the original flyash was lost to the vapour phase per unit mass of initial flyash. Although the desorbed species were mainly the lower mono- to tri-congener group of dioxins and furans, the desorbed dioxin/furans had a considerable toxic equivalent value.     

Anoxic-aerobic treatment of the liquid fraction of cattle manure

Cattle manure from a dairy farm was treated in order to reduce its pollution potential. The manure came from a farm with 120 cows kept in stables in a free stall barn. As pretreatment, the manure is usually filtered on the farm using a screw press separator with a 0.5 mm mesh. Approximately 70% of the total filtered volume passes through the screen, thus constituting the liquid fraction. This fraction, with a composition of around 64,500 mg COD/l, 5770 mg total-N/l and 800 mg total-P/l, was subjected to centrifugation followed by a two-step biological treatment (anoxic-aerobic) to reduce organic matter (COD), nitrogen and phosphorus compounds. Centrifugation led to the following removal efficiencies: 35% total solids, 60% COD, 75% total phosphorus and 20% total nitrogen (mainly organic nitrogen). With the subsequent anoxic-aerobic treatment, average removal efficiencies of 85% for COD, 90% for total phosphorus and 75% for total nitrogen were achieved.     

The effects of aeration rate on generated compost quality, using aerated static pile method

To determine the most appropriate composting process in an active municipal solid waste system, an experiment was carried out using a nested design method with three aeration rates. During each aeration rate, parameters such as temperature, pH, EC, carbon-to-nitrogen ratio, NO(3)-N, nitrogen, potassium and phosphorous were measured and the efficiency of different composting processes was evaluated. The result of this study showed that the lower and medium aeration rates had a significant impact on nitrogen, carbon-to-nitrogen ratio and temperature profile, while higher aeration rates led to higher EC values. Furthermore, the thermophilic phase lasted 13, 9 and 4 weeks for the aeration rates of 0.4, 0.6 and 0.9 L min(-1)kg(-1), respectively. Accordingly, it was concluded that starting at a rate of 0.6 L min(-1)kg(-1) during first 2 months (about 9 weeks) of the process and continuing at a rate of 0.4 L min(-1)kg(-1)until the end of composting process would result in lower energy consumption.