Survey of tritium radioactivity in Lake Huron surface water

The tritium concentration in Lake Huron water has declined from a high measured in the late 1960s to a 1981 level of ～ 200 pCi/L, similar to literature values for the Great Lakes Waterways and other U.S. surface waters. All current levels for U.S. surface waters including our local water are well within the limits set by the EPA as a standard for drinking water.     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

Core self‐evaluations in Japan: relative effects on job satisfaction,life satisfaction,and happiness

The present study tested, in a non‐Western culture (Japan), the relative validity in predicting job satisfaction, life satisfaction, and happiness of core self‐evaluations (CSE), positive and negative affectivity (PA/NA), and the Neutral Objects Satisfaction Questionnaire (NOSQ). Consistent with previous results in primarily Western cultures, the four lower‐order traits that comprise CSE—self‐esteem, generalized self‐efficacy, locus of control, and neuroticism—indicated a higher‐order factor. While each lower‐order trait was itself related to the study's criteria, the CSE concept displayed in general, higher correlations with the dependent variables, and explained incremental variance in two of the study's three outcomes beyond PA, NA, and the NOSQ. These results indicate initial support for the generalizability of CSE in a culture that differs in many respects from Western cultures, and suggest that judgments of satisfaction and happiness in a non‐Western culture have a dispositional source. Copyright © 2005 John Wiley & Sons, Ltd.     

Impact of Community-Based Forest Management on Forest Protection: Evidence from an Aid-Funded Project in Ethiopia

Many African countries have adopted community-based forest management (CBFM) to prevent deforestation. However, empirical studies have not reached a consensus on the effectiveness of CBFM. The purpose of this study is to examine the impact of the establishment of participatory forest management associations in Ethiopia. We used remote sensing data to gauge the change in forest area and employed a two-stage least squares model to correct for possible biases. The results indicate that the forest area managed by forest associations declines more in the year of establishment than forest areas with no association. This finding suggests that villagers may engage in "last-minute" logging. However, 1 year after the establishment of the forest associations, the forest area of the associations increased substantially, most likely because the associations monitor illegal logging, enabling the regeneration of open areas within the registered forest area. On average, the forest area of the forest associations increased by 1.5?% in the first 2 years, whereas forest areas not managed as part of an association declined by 3.3?%. The cumulative impact over 2 years yields a net increase in the rate of change of 4.8?%. These results demonstrate that it is important to improve the monitoring of forest areas during the initial establishment of participatory forest management associations to maximize the effects of association establishment.     

Determination of dioxin concentrations in fish and seafood samples using a highly sensitive reporter cell line, DR-EcoScreen cells

There is a strong need for the development of relatively rapid and low-cost bioassays for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in environmental and food samples. In this study, we applied a reporter gene assay using DR-EcoScreen cells (DR-cell assay), which is highly sensitive to dioxins, to the determination of PCDD/Fs and dl-PCBs in fish and seafood samples. The PCDD/Fs and dl-PCBs were extracted from homogenated samples (10 g) of 30 fish and shellfish, purified by clean-up procedure using a multilayered silica gel column and an alumina column, and applied to DR-cell assay. Interestingly, the bioanalytical equivalent (BEQ) values obtained from the DR-cell assay [<0.1 ∼ 5.4 pg BEQ g⁻¹ wet weight (ww)] were closely correlated with the toxicity equivalent (TEQ) values from conventional high-resolution gas chromatography/high-resolution mass spectrometry (HRGC-HRMS) analysis (r² = 0.912), and the slope of regression line was 0.913. Therefore, we multiplied the BEQ values from the DR-cell assay by a conversion coefficient (1.095, the reciprocal of 0.913) to approximate the TEQ values from the HRGC-HRMS analysis. Furthermore, we used this DR-cell assay to perform a prescreening test of PCDD/Fs and dl-PCBs in 16 fish and seafood samples purchased from a supermarket, revealing that a sample from the fatty flesh of a bluefin tuna exceeded 8 pg TEQ g⁻¹ ww (the European Union-tolerance limit). Taken together, these results suggest that the DR-cell assay might be applicable as a rapid and low-cost prescreening method to determine dioxin levels in fish and seafood samples.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Thermal analysis of polyethylene glycol: evolved gas analysis with ion attachment mass spectrometry

The thermal decomposition of polyethylene glycol was investigated by using a technique combining evolved gas analysis (time-resolved pyrolysis) with ion-attachment mass spectrometry. This technique allows the detection of intact pyrolysis products and, therefore, offers the opportunity for direct real-time monitoring of thermal by-products. Unstable products can thus be detected; for instance, many highly reactive organic peroxides, such as CH₃OOH and HOCH₂OOH, were found in this study. Classification analysis revealed 10 major compositional formulas among the product species: C_nH_2n+2O, C_nH_2n+2O₂, C_nH_2n+2O₃, C_nH_2n+2O₄, C_nH_2n+2O₅, C_nH_2n+2O₆, C_nH_2n+2O₇, C_nH_2nO, C_nH_2nO₂, and HO(CH₂CH₂O)_nH ethylene glycol oligomers. The Li⁺ ion adduct mass spectra showed a characteristic profile in terms of both the appearance of unique components and the distribution of pyrolysis products. Among the products of the thermal decomposition of PEG, formaldehyde (HCHO) and organic peroxides were particularly interesting. Formaldehyde, one of the 10 most abundant products, is a known human carcinogen. The detection of peroxides suggests that they may form during the incineration of PEG, which may have important environmental implications. The existence of peroxide products may have implications for chemical evolution in incinerator systems.     

A study on the self-assembly behavior of dark materials from molasses

We have previously demonstrated that dark materials (DM) in acidified molasses are effectively adsorbed to Amberlite XAD7HP resin and are eluted from the resin with 0.1 M sodium hydroxide. In this paper, we have characterized the self-assembly behavior of molasses DM by using dynamic and static light scattering in combination with isoelectric focusing and infrared absorption spectroscopy in order to better understand the resin adsorption mechanism. One of DM derivatives, X-G2, contained carboxyl and hydroxyl groups and had a weight-average molar mass of 9.39?×?10³ to 4.42?×?10⁴ at pH 2.1–11.5. The aggregates retained their spherical shape over the full pH range and the large gyration radius (66.4–80.0 nm) indicated that the inner structure was loosely packed. Furthermore, X-G2 had an isoelectric point of 1.8, and its density increased sharply at pH 5.9 and then approached a nearly constant value under alkaline conditions. In summary, the self-assembly processes of DM are controlled by intermolecular hydrogen-bonding and hydrophobic interactions. The aggregates adsorb to the resin through hydrophobic interactions and are eluted when excess carboxylate anions are generated.     

Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0–70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.

Implications Although waste combustion is one of major anthropogenic sources of atmospheric mercury emission, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated speciated mercury emissions from the combustions of municipal solid wastes, sewage treatment sludge with/without waste plastics, industrial waste mixtures, waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form in all combustion cases and its concentration in the gas had large fluctuation. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.