Tracer transport model at Japan meteorological agency and its application to the ETEX data

This paper describes the JMA tracer transport model and its sensitivity to model physics and initial conditions by using the ETEX data. Compared with observations, the model overestimates ground-level concentration in the early stage within about one day from the emission, possibly due to underestimation of vertical diffusion. In the early stage, the enhanced vertical diffusion effectively transports the tracer upward and decreases the ground-level concentration, while in the later stage, it enhances downward transports from the upper layer and increases the ground-level concentration. A conceptual model is given for understanding the vertical transport due to vertical diffusion. The horizontal diffusion introduced to the model has preferable impacts on forecasts especially in the early stage. Finally, we discuss the predictability of this model based on sensitivity to initial conditions of emission time and height.     

Rewriting the Plot: Sustaining allotments in the UK and Japan

In the search for a model form of allotment garden in the late 1980s, capable of absorbing surplus farmland while sustaining the capacity of the land to support agriculture, Japanese experts rejected the UK allotment, which was perceived to be of low status and in decline, in favour of the German Kleingarten. This paper suggests that it may be time to reconsider the UK experience, in the light of subsequent moves to rewrite the image and practice of allotment gardening in the UK within the local sustainable development agenda, and the problems which the Japanese version of the Kleingarten model has encountered in the changed economic circumstances of the 1990s.     

Recovery efficiency of the hydrofluorocarbon (HFC‐134a) by activated carbons of different physicochemical properties

The adsorption characteristics of 1,1,1,2‐tetrafluoroethane (HFC‐134a) on activated carbon were investigated to evaluate the recovery efficiency of HFC‐134a by six activated carbons (two granular activated carbons (GAC1 and GAC2), one high‐surface area activated carbon (HAC), and three activated carbon fibers (ACF10, ACF15, and ACF20)). HFC‐134a adsorption on the activated carbons increased with increase in the specific surface area and pore volume of the activated carbon. The differential heat of the HFC‐134a adsorption decreased with increase in the percentage of the micropore volume to the total pore volume. The adsorption model of HFC‐134a on the activated carbon could be based on the Langmuir model. The constant a of the Langmuir plot of HAC and ACF20 is smaller than GAC1 or GAC2 and ACF10 or ACF15, respectively. The constant W_s of HAC has the largest value. The constant a was correlated to the heat of adsorption. It is concluded that the largest amount of HFC‐134a was adsorbed on HAC, and the least amount of interaction occurred between HFC‐134a and the HAC. The amount of HFC‐134a adsorbed on the activated carbons over time was applied to the Sameshima equation. The adsorption rate constant of HFC‐134a on HAC was the largest. The HAC could be suitable for the recovery of HFC‐134a.     

Honeybee foragers adjust crop contents before leaving the hive

Upon leaving the hive, foragers carry a small amount of honey, which they subsequently consume to generate energy for flight. We investigated the relationship between waggle-phase duration and crop volume in foragers (both dancers and dance followers) leaving the hive. Our findings indicate that these variables were positively correlated in the two types of bee, suggesting that they were able to adjust the amount of food that they carry depending on the distance to a food source. We also found that dance followers left the hive with a larger amount of honey than dancers. We suggest two possible explanations: (1) dance followers have less information about the location of the food source than dancers, who have a better knowledge of the surrounding area; or (2) honeybees lack a precise calibration method for estimating energy needs from waggle-run duration. The effect of foraging experience was confirmed: bees decreased their honey load at departure with repeated trips to a sugar-syrup feeder. Honeybees showed a different pattern of change when the feeder provided soybean flour as a pollen substitute, possibly because honeybees use honey not only as an energy source but also as “glue” to form “balls” of pollen on their hind legs. Based on our observations that followers of sugar-syrup foragers carry a different amount of honey in their crop than followers of soybean-followers, we suggest that waggle dancers also convey information concerning food type.     

Reduction of CO2 emission by optimally tracking a pre-defined target

The recent global financial crisis has highlighted the need for balanced and efficient investments in the reduction of the greenhouse effect caused by emissions of CO₂ on a global scale. In a previous paper, the authors proposed a mathematical model describing the dynamic relation of CO₂ emission with investment in reforestation and clean technology. An efficient allocation of resources to reduce the greenhouse effect has also been proposed. Here, this model is used to provide estimates of the investments needed in land reforestation and in the adoption of clean technologies for an optimum emission and abatement of CO₂, for the period of 1996–2014. The required investments are computed to minimize deviations with respect to the emission targets proposed in the Kyoto Protocol for European Countries. The emission target can be achieved by 2014 with investments in reforestation peaking in 2004, and a reduction of the expected GDP of 42%, relative to 2006. Investments in clean technology should increase between 2008 and 2010 with maximum transfer figures around 70 million American dollars. Total (cumulative) costs are, however, relatively high depending on the price of carbon abatement and the rate at which the expected CO₂ concentration in the atmosphere should be reduced. Results highlight the advantages for policy makers to be able to manage investments in climate policy more efficiently, controlling optimum transfers based on a portfolio of actions that tracks a pre-defined CO₂ concentration target.     

Factors affecting the interval between clutches in the hermit crab <Emphasis Type="Italic">Pagurus nigrivittatus</Emphasis>

Interval between reproductive events is an important factor for iteroparous animals because it determines the number of clutches throughout life. This study examined whether female size, clutch size, shell size and prenuptial molting affected the clutch interval in the hermit crab Pagurus nigrivittatus. Precopulatory guarding pairs of P. nigrivittatus were sampled in the field and kept in the laboratory until the female extruded eggs. The clutch interval of each female was assessed as one of two types of relatively “short” and “long” intervals by checking whether the guarded female had eggs and/or egg cases from the preceding brood or not when the guarding pair was collected. The clutch interval was longer in females with prenuptial molting than those without molting and these females usually grew larger at the prenuptial molt. This suggests that female P. nigrivittatus with a long interval might allocate energy into growth at the expense of the number of clutches during the current reproductive season. The allocation to growth is theoretically predicted to decrease with female size. Gastropod shell size is also known to affect the reproductive activity in hermit crabs. However, female size did not significantly affect the clutch interval in P. nigrivittatus, and the effect of gastropod shell size on clutch interval was not consistent with previous empirical studies. These results may be caused by differences in the gastropod species of shell occupied by the females of P. nigrivittatus.     

A method for diagnosis of plant environmental stresses by gene expression profiling using a cDNA macroarray

Plants in the field are subjected to numerous environmental stresses. Lengthy continuation of such environmental stresses or a rapid increase in their intensity is harmful to vegetation. Assessments of the phytotoxicity of various stresses have been performed in many countries, although they have largely been based on estimates of leaf injury. We developed a novel method of detecting plant stresses that is more sensitive and specific than those previously available. This method is based on the detection of mRNA expression changes in 205 ozone-responsive Arabidopsis expressed sequence tags (ESTs) by cDNA macroarray analysis. By using this method, we illustrated shifts in gene expression in response to stressors such as drought, salinity, UV-B, low temperature, high temperature, and acid rain, as distinct from those in response to ozone. We also made a mini-scale macroarray with 12 ESTs for diagnosis of the above environmental stresses in plants. These results illustrate the potential of our cDNA macroarray for diagnosis of various stresses in plants.     

Waste wood recycling as animal bedding and development of bio-monitoring tool using the CALUX assay

Animal bedding made of waste wood samples from seven different plants in Japan were chemically analyzed in terms of persistent organic pollutants (POPs) including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs), coplanar polychlorinated biphenyls (Co-PCBs), drin compounds, chlordane compounds and various inorganic toxic compounds (Cr, Cu, As, B, Cd and Pb) to investigate the chemical characteristics and levels of contamination. Further investigation was conducted to determine the success of applying the Chemically Activated Luciferase Expression (CALUX) bioassay to the waste wood samples in combination with a cleanup procedure for the detection of dioxin-like compounds in order to develop the CALUX bioassay as a rapid and cost-effective screening/monitoring method and a contributive tool to risk management in the waste wood recycling process. For the cleanup procedure, crude extracts from wood samples were prepared by dimethylsulfoxide (DMSO)/n-hexane extraction, and then the extracts were processed by silica gel-44% sulfuric acid reflux treatment at 70 degrees C for 60 min to yield the bioassay fractions. The presence of POPs and inorganic toxic compounds were confirmed in most of the litter samples. In particular, Co-PCBs in one sample (litter dust) showed a high concentration level (1200000 pg/g, 240 pg TEQ/g), suggesting the potential for contamination from demolition waste. The CALUX assay-determined TEQs (CALUX-TEQs) were significantly high in the sample after DMSO/n-hexane extraction, probably due to labile aryl hydrocarbon receptor (AhR) ligands such as PAHs; however, they were remarkably reduced through a single silica gel-44% sulfuric acid reflux treatment. The ratio between CALUX-TEQ values and WHO toxicity equivalent values (WHO-TEQ) obtained by congener-specific chemical analysis ranged from 0.058 to 22 and show comparatively good agreement. Underestimation in some samples, however, was observed where WHO-TEQ values of Co-PCBs contributed greatly to total WHO-TEQ values. Reasons for this gap could be lower CALUX assay-determined relative potencies (REPs) than the WHO-TEFs for these congeners or AhR-antagonistic effects of non dioxin-like PCBs which coexist at higher concentration than Co-PCBs. The CALUX assay is proposed as a promising application in the recycling process of wooden materials.     

Detection and average content levels of carcinogenic and mutagenic compounds from the particulates on diesel and gasoline engine mufflers

Carcinogenic and mutagenic compounds, which were extracted from the particulates that adhered to inner surfaces of diesel and gasoline engine mufflers, were quantified by the series method of Soxhlet extraction, liquid-liquid partition, thin-layer chromatography, and spectrofluorometry. Mutagenic activity of their neutral and acidic fractions was tested in the improved Ames assay by the preincubation method with Salmonella typhimurium TA98 in the presence and absence of metabolic activation system (S-9 mix). The average content levels (μg/g tar) of polycyclic aromatic hydrocarbons from gasoline engine cars were greater than those from diesel engine vehicles. However, the levels of nitro derivatives of PAHs and polycyclic quinones from the diesel engines were greater than from the gasoline engines. Mutagenic activity of the diesel acidic fraction was the highest among the diesel and gasoline fractions, and was significantly higher in the absence of the S-9 mix. Furthermore, the relative value (R_{c = 0}) of infrared absorption of carbonyl stretching vibration to that of methylene asymmetric stretching vibration of the diesel acidic fraction was the highest among the diesel and gasoline fractions. These results strongly suggest that highly direct-acting mutagens in the acidic fraction are at higher levels in diesel emission particulates than those from gasoline, and that these mutagens are carboxylic acid, aldehyde, and alcohol derivatives of PAHs and NPAHs.