Inbreeding avoidance or tolerance? Comparison of mating behavior between mass-reared and wild strains of the sweet potato weevil

Inadvertent selection is an important genetic process that frequently occurs during laboratory culture. The mass-reared strain of the sweet potato weevil Cylas formicarius exhibits stronger inbreeding depression than the wild strain does. When inbreeding depression occurs in a population, mating with a close relative is often considered maladaptive; however, in some contexts, the inclusive fitness benefits of inbreeding may outweigh the costs, favoring individuals that tolerate a low level of inbreeding depression. Theory predicts that mass-reared strain weevils will avoid inbreeding while wild strain weevils will tolerate inbreeding. To examine this prediction, we compared the effect of relatedness on the mating and insemination successes in mass-reared and wild strains of C. formicarius. While close relative pairs of the wild strain copulated less frequently than non-kin pairs, almost all mass-reared strain pairs copulated irrespective of relatedness. The results showed that the strain with weak inbreeding depression (wild strain) avoided inbreeding, whereas the strain with strong inbreeding depression (mass-reared strain) tolerated inbreeding. The contradiction between the theoretical prediction and our results is discussed from the perspective of laboratory adaptation, mating systems, and life history of C. formicarius.     

Sperm transfer or spermatangia removal: postcopulatory behaviour of picking up spermatangium by female Japanese pygmy squid

In the Japanese pygmy squid Idiosepius paradoxus, females often pick up the spermatangium using their mouth (buccal mass) after copulation. To examine whether the female I. paradoxus directly transfers sperm into the seminal receptacle via this picking behaviour, or removes the spermatangium, we conducted detailed observations of picking behaviour in both virgin and copulated females and compared the sperm storage conditions in the seminal receptacle between females with and without spermatangia picking after copulation in virgin females. In all observations, elongation of the buccal mass occurred within 5 min after copulation. However, sperm volume in the seminal receptacle was not related to spermatangia picking. Observations using slow-motion video revealed that females removed the spermatangia by blowing or eating after picking. These results suggest that picking behaviour is used for sperm removal but not for sperm transfer. Moreover, the frequency of buccal mass elongation was higher in copulated females than in virgin females, consistent with the sequential mate choice theory whereby virgin females secure sperm for fertilisation, while previously copulated females are more selective about their mate. Female I. paradoxus may choose its mate cryptically through postcopulatory picking behaviour.     

Development of a dynamic transfer model of (14)C from the atmosphere to rice plants

A dynamic compartment model was investigated to describe ¹⁴C accumulation in rice plants exposed to atmospheric ¹⁴C with temporally changing concentrations. In the model, rice plants were regarded to consist of three compartments: the ear and the mobile and immobile carbon pools of the shoot. Photosynthetically fixed carbon moves into the ear and the mobile carbon pool, and these two compartments release a part of this carbon into the atmosphere by respiration. Carbon accumulated in the mobile carbon pool is redistributed to the ear, while carbon transferred into the immobile carbon pool from the mobile one is accumulated there until harvest. The model was examined by cultivation experiments using the stable isotope, ¹³C, in which the ratios of carbon photosynthetically fixed at nine times during plant growth to the total carbon at the time of harvest were determined. The model estimates of the ratios were in relatively good agreement with the experimental observations, which implies that the newly developed compartment model is applicable to estimate properly the radiation dose to the neighboring population due to an accidental release of ¹⁴C from nuclear facilities.     

Promoting Sustainability with Ecological, Economic and Social Dimensions in Developing Countries

Sustainable development is one of the most important ideas, and goals of our time. It is defined as ＂development which meets the needs and aspirations of the current generation and develops safe and sound society for future generation＂. Achieving sustainable development thus involves a vigorous and urgent debate on different dimensions. The different dimensions of sustainability as a framework involve all issues such as science, technology, economic growth and development, health, education, finance investment and trade, politics, natural disasters, population growth and terrorism, etc. No single dimension is responsible to develop sustainable society. This article mainly described the integrated relationship among the three dimensions ofsustainability.     

Using native epiphytic ferns to estimate the atmospheric mercury levels in a small-scale gold mining area of West Java, Indonesia

Mercury pollution is caused by artisanal and small-scale gold mining (ASGM) operations along the Cikaniki River (West Java, Indonesia). The atmosphere is one of the primary media through which mercury can disperse. In this study, atmospheric mercury levels are estimated using the native epiphytic fern Asplenium nidus complex (A. nidus) as a biomonitor; these estimates shed light on the atmospheric dispersion of mercury released during mining.Samples were collected from 8 sites along the Cikaniki Basin during September-November, 2008 and September-November, 2009.The A. nidus fronds that were attached to tree trunks 1-3 m above the ground were collected and measured for total mercury concentration using cold vapor atomic absorption spectrometry (CVAAS) after acid-digestion. The atmospheric mercury was collected using porous gold collectors, and the concentrations were determined using double-amalgam CVAAS.The highest atmospheric mercury concentration, 1.8 × 10³ ± 1.6 × 10³ ng m⁻³, was observed at the mining hot spot, and the lowest concentration of mercury, 5.6 ± 2.0 ng m⁻³, was observed at the remote site from the Cikaniki River in 2009. The mercury concentrations in A. nidus were higher at the mining village (5.4 × 10³ ± 1.6 × 10³ ng g⁻¹) than at the remote site (70 ± 30 ng g⁻¹). The distribution of mercury in A. nidus was similar to that in the atmosphere; a significant correlation was observed between the mercury concentrations in the air and in A. nidus (r = 0.895, P < 0.001, n = 14). The mercury levels in the atmosphere can be estimated from the mercury concentration in A. nidus using a regression equation: log (Hg_A.nidu/ng g⁻¹) = 0.740 log (Hg_Air/ng m⁻³) − 1.324.     

Transformation of microflora during degradation of gaseous toluene in a biofilter detected using PCR-DGGE

A laboratory-scale biofiltration system, the rotatory-switching biofilter (RSB), was operated for 199 days using toluene as a model pollutant. The target gaseous pollutant for the biofiltration experiment was approximately 300 ppmv of toluene. Toluene removal efficiency (RE, %) was initially approximately 20% with a 247-ppmv concentration (0.9 g m(-3)) of toluene during the first 10 days. Although the RE decreased several times whenever nitrogen was consumed, it again reached almost 100% when the nitrogen source was in sufficient supply. Denaturing gradient gel electrophoresis (DGGE) analysis was employed to assess the transformation ofmicroflora during operation of the biofilter The results based on a 16S rRNA gene profile showed that the microbial community structure changed with operation time. Although the microflora changed during the initial period (before day 40), transformation of the bacterial component was hardly observed after day 51. Statistical analyses of the DGGE profiles indicated that the bacterial community was almost unaffected by the environmental factors, such as adding ozone, high-level nitrogen supply, increase of loading toluene, and the shutdown of the RSB. The DGGE profile using tmoA-like genes, which encode proteins belonging to the hydroxylase component mono-oxygenases involved in the initial attack of aerobic benzene, toluene, ethylbenzene, and xylene degradation, confirmed the existence of toluene-degrading bacteria. There were at least four kinds of toluene-degradable bacteria having tmoA-like genes up to day 36, which decreased to two species after day 40. Sequence analysis after DGGE profiling revealed that Burkholderia cepacia, Sphingobacterium multivorum, and Pseudomonas putida were present in the biofilter. Only Alicycliphilus denitrificans was present throughout the whole operation period. In the initial stage of operating the RSB, many types of bacteria may have tried to adapt to the conditions, and subsequently, only selected bacteria were able to grow and to degrade toluene.     

A New Catalytic Reactor for Nitrogen Oxides Removal

The body of information presented in this paper is directed to those individuals concerned with the catalytic NO_x removal reactor for a dirty (containing dust) flue gas. In the case of treating a dirty flue gas, the concentration of dust is the most important factor. While the dirty gas passes through the catalytic reactor, dust particles deposit and plug up the catalyst causing the reactor pressure loss to rise. As a result, the NO_x reduction efficiency decreases more and more, and continuous operation becomes impossible. A new type of NO_x removal reactor for dirty flue gas, the intermittent moving bed reactor, has been developed. The following characteristics have been evaluated: (1) method of calculating reactor pressure loss caused by dust particles, (2) static pressure distribution across the catalyst bed in the reactor, (3) method of evaluating uniform movement of catalyst and (4) reentrainment pattern of dust by catalyst movement. After carrying out various successful pilot plant tests, the information needed for construction and operation of a commercial plant has been developed.     

Selective Reduction of Nitrogen Oxides In Combustion Flue Gases

The body of Information presented in this paper is directed to those Individuals concerned with the removal of NO_x in combustion flue gases. A catalytic process for the selective reduction of nitrogen oxides by ammonia has been investigated. Efforts were made toward the development of catalysts resistant to SO_x poisoning. Nitrogen oxides were reduced over various metal oxide catalysts in the presence or absence of SO_x(SO₂ and SO₃). Catalysts consisting of oxides of base metals (for example, Fe₂O₃) were easily poisoned by SO₃, forming sulfates of the base metals. A series of catalysts which are not susceptible to the SO_x poisoning has been developed. The catalysts possess a high activity and selectivity over a wide range of temperatures, 250—450°C. The catalysts were tested in a pilot plant which treated a flue gas containing 110-150 ppm NO_x, 660-750 ppm SO₂, and 40-90 ppm SO₃. The pilot plant was operated at 350°C and at a space velocity of 10,000 h^-1. The removal of nitrogen oxides was more than 90% for several months.

A mechanism of the NO-NH₃ reaction has also been investigated. It is found that NO reacts with NH₃ at a 1:1 mole ratio in the presence of oxygen and the reaction is completely inhibited by the absence of oxygen. The experimental data show that the NO-NH₃ reaction in the presence of oxygen is represented byNO + NH₃ + 1/4 O₂ = N₂ + 3/2 H₂O.     

Evaluation of pressurized liquid extraction for the analysis of four pesticides in unpolished rice

The aim of to evaluate efficiency of this study was extraction pressurized liquid extraction (PLE) for the analysis of four pesticides, fthalide, etofenprox, fenitrothion, and isoprothiolane, in unpolished rice by comparing with homogenization as a reference technique. The concentrations of four selected pesticides obtained by PLE with acetonitrile at 130 degrees C for 10 min x 2 cycles were comparable to those by homogenization with water-soaking. The repeatability of the analysis, represented as relative standard deviations (RSDs), were 1.4-3.6% (n = 3) for PLE at 130 degrees C and 1.2-3.8% (n = 3) for homogenization with water-soaking. Recovery yields of surrogates were 75-88% and 87-109% for PLE at 130 degrees C and homogenization with water-soaking, respectively, and these were satisfactory according to the method of positive list. This study suggested that PLE can be applied for the analysis of selected four pesticides in unpolished rice as well as homogenization with water-soaking.