Developing joint educational programs in sustainability science across different universities: a case study from Japan

The challenge for sustainability educational programs lies in how to imbue students with the strong motivation necessary to move the world in a more sustainable direction. Five universities in Japan have mutually collaborated in the design and development of a unique curriculum and education system for sustainability science since 2008. Specifically, they have developed a common and remote lecture system called the “Frontier of sustainability science” (FSS). This paper discusses the concepts and challenges of FSS and how it was organized to teach students to actively learn how to work with people of various disciplines to realize interdisciplinarity.     

Laboratory studies of the diffusive transport of Cs and Co through potential waste repository soils

Tests using reconstituted samples have been performed to assess the diffusive transport of ¹³⁷Cs and ⁶⁰Co through natural regolith materials from a region in South Australia being considered for a radioactive waste repository. A double diffusion cell apparatus made of polycarbonate resin was developed to estimate the effective diffusion (D_e) and sorption coefficients (K_d) that allowed large withdrawals from the source and collector cells and has enabled tests with low concentrations of radioactivity. An alternative to porous stainless steel filter plates has also been used to reduce uncertainty in test interpretation. Analysis of the transient data used a staged method of the Laplace transform to take into consideration the volume of the samples withdrawn from the apparatus during testing. At test completion samples were cut into slices and analysed for radionuclide concentration. Data obtained from the sliced samples confirmed that both numerical and experimental data produced acceptable mass balance. The D_e values obtained in this study were of the order of 10⁻⁶ cm² s⁻¹ for both species, higher than previously published data. The K_d values from the diffusion and batch sorption tests were in reasonable agreement for ¹³⁷Cs, but an order of magnitude different for ⁶⁰Co. The sorption of the latter radionuclide was strongly pH dependent, and this dependency during diffusion tests would benefit from further investigation.     

Impact of the December 2004 tsunami on soil, groundwater and vegetation in the Nagapattinam district, India

The tsunami of 26 December 2004 struck the Nagapattinam District, Tamil Nadu, India. Sea water inundation from the tsunami caused salinization problems for soil and groundwater in coastal areas of the district, and also induced salt injuries in crops. To document the recovery of the agricultural environment from the tsunami, we conducted observations of the soil, groundwater, and vegetation. Soil electrical conductivity increased sharply after the tsunami, but returned to pre-tsunami levels the following year. Groundwater salinity returned to pre-tsunami levels by 2006. These rapid rates of recovery were due to the monsoon rainfall leaching salt from the highly permeable soils in the area. MODIS NDVI values measured before and after the tsunami showed that vegetation damaged by the tsunami recovered to its pre-tsunami state by the next rice cropping season, called samba, which starts from August to February. From these results, we conclude that the agricultural environment of the district has now fully recovered from the tsunami. Based on the results, we have also identified important management implications for soil, groundwater, and vegetation as follows: 1) due to the heavy monsoon rainfall and the high permeability of soils in this region, anthropogenic inputs like fertilizers should be applied carefully to minimize pollution, and the use of green manure is recommended; 2) areas that were contaminated by sea water extended up to 1000 m from the sea shore and over pumping of groundwater should be carefully avoided to prevent inducing sea water intrusion; and 3) data from a moderate resolution sensor of 250 m, such as MODIS, can be applied to impact assessment in widespread paddy field areas like the Nagapattinam District.     

Sustainability education and a new master’s degree, the master of sustainability science: the Graduate Program in Sustainability Science (GPSS) at the University of Tokyo

The University of Tokyo started its Graduate Program in Sustainability Science (GPSS), offering a master of sustainability science degree, in 2007. The GPSS curriculum consists of: (1) knowledge and concept oriented courses, which cover sustainability-related subjects from a holistic viewpoint; (2) experiential learning and skills oriented practical courses, which offer practical exercises to acquire the skills and sensibility required of future leaders; and (3) the Master’s thesis, for which students are encouraged to address complex sustainability problems through a transdisciplinary approach. Sustainability science is not a discipline that can be defined simply by the subjects it deals with, but is an academic field characterized by core principles that include holistic thinking, transdisciplinarity, and respect for diversity. The GPSS has been designed so that students may gain the capacity to understand and practice these principles. The present paper describes how the GPSS has defined sustainability education and designed its curriculum accordingly.     

Viable chemical recycling of poly(carbonate) as a phosgene equivalent illustrated by the coproduction of bisphenol A and carbohydrate carbonates

Chemical recycling of waste poly(carbonate) (PC) to coproduce bisphenol A (BPA) and carbohydrate carbonates was studied by selecting glycerol (Gly) and glucose (Glu) as model carbohydrates (CHs). In advance of the reaction of PC with CHs, reactions with diphenyl carbonate were examined as a model PC. In dioxane at 100°C using NaOH as catalyst, Gly was converted to cyclic carbonate hydroxymethyldioxolane (HMDO) at 98% and Glu was converted to the dicarbonate (Glu-DC) at 46%, in pyridine, in addition to the production of phenol. Similar treatment of PC with Gly using KOH as a catalyst produced HMDO and BPA at very high yields and treatment with Glu produced Glu-DC and BPA in 38%–42% yields. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Subcellular distribution of trace elements in kidney of a mother-fetus pair of Dall's porpoises (Phocoenoides dalli)

Total and subcellular renal Zn, Cu, Se, Mn, V, Hg, Cd and Ag were determined by a mother-fetus pair of Dall's porpoises (Phocoenoides dalli). All element concentrations in the maternal individual were higher than those in the fetal individual. Most of total renal elements studied were present in the cytosol of both animals. In maternal cytosol, Mn, Hg and Ag were present in high molecular weight substances (HMW); Se was in low molecular weight substances (LMW); Zn, Cu, and Cd were in metallothionein (MT), mostly; and the distribution of V in percentage among the three renal cytosolic fractions was similar. In fetal cytosol, Zn, Mn, Hg, V, Cd, and Ag were present in HMW, Cu was present in MT, mostly. In contrast, Se was observed mostly in both LMW and HMW. MT isoforms were characterized. Three obvious peaks in retention time were found in either the maternal or fetal MT. The highest elemental ion intensities were in the 7.8min peak for the mother, and in the 4.3min peak for the fetus, respectively, implying that different MT isoforms may be closely associated with elemental accumulation between maternal and fetal renal cytosols.     

Restoration of cadmium-contaminated paddy soils by washing with ferric chloride: Cd extraction mechanism and bench-scale verification

The ability of FeCl3 to extract Cd from three paddy soils was compared with that of various irons, manganese, and zinc salts to elucidate the extraction mechanism. Manganese, zinc and iron salts (including FeCl3) extracted 4-41%, 8-44% and 24-66% of total Cd, respectively. This difference reflected the pH of the extraction solution, indicating that the primary mechanism of Cd extraction by FeCl3 is proton release coupled with hydroxide generation, as iron hydroxides are insoluble. Washing with FeCl3 led to the formation of Cd-chloride complexes, enhancing Cd extraction from the soils. FeCl3 effectively extracted Cd from all of the three soils compared to HCl that is a conventional washing chemical, when the concentrations of the two washing chemicals were between 15 and 60mM(c) (at above extraction pH 2.4), while the corresponding extraction pH of FeCl3 was slightly higher than HCl. As HCl is the strong acid of complete dissociation, if excess amount of HCl was added to soil, it is possible to give the dissolution of clay minerals in soils. In contrast, proton release from FeCl3 is controlled by the chemical equilibrium of hydroxide formation. While soil fertility properties were affected by a bench-scale soil washing with 45mM(c) FeCl3, adverse effects were not crucial and could be corrected. The bench-scale test confirmed the effectiveness of FeCl3 for removal of soil Cd. The washing had no negative effect on rice yield and lowered the Cd concentration of rice grain and rice straw in a pot experiment.     

Application of biological safety index in two Japanese watersheds using a bioassay battery

In order to integratedly evaluate the biological safety as a water quality index, an assessment method based on three toxicity tests (algae growth inhibition, daphnia immobilization and larval fish toxicity) was developed. In this study, the developed method was used to screen, evaluate and rank the biological safety of small rivers near agricultural, industrial and residential areas. Twenty-seven representative water samples were collected from the Kaname River watershed and the Hinata River watershed in Kanagawa Prefecture, Japan. The results indicated that (1) the biological safety of water from the Hinata River ranked much higher than those from the Suzu River and the Shibuta River due to less human activities, (2) the biological safety from outlets of paddy fields ranked much worse than those from point source discharges of toxic pollutants, (3) the use of pesticides significantly affected the water quality of nearby small rivers and ditches during the pesticide application season, (4) the effects of different kinds of pesticides could successfully be classified using one toxicity test component of the bioassay battery, and (5) there was no significant quantitative relationship between the toxicity and dissolved organic carbon (DOC) for the studied water samples. The toxicities of water samples in this study were in agreement with the concentrations of pesticides determined with chemical methods by other researchers, which demonstrated that the developed assessment method was reliable to screen site contaminated with organic chemicals for priority management.     

Evaluation of pressurized liquid extraction for determination of organophosphorus and pyrethroid pesticides in soybean

The purpose of this study was to develop an analytical method for the determination of organophosphorus and pyrethroid pesticides in soybean by pressurized liquid extraction (PLE). Two organic solvents, acetone and acetonitrile, were evaluated as extraction solvents. In both cases, the amount of extract was enhanced with increasing extraction temperature. The extracts obtained using acetonitrile were measured by gas chromatography/mass spectrometry after a cleanup process based on the analytical method for the Japanese Positive List System for Agricultural Chemicals Remaining in Foods. The effect of extraction temperature (range: 40– 130°C) on extraction efficiency was evaluated by a recovery study using 21 organophosphorus pesticides and 10 pyrethroid pesticides as target analytes and acetonitrile as the solvent. The results indicated that at 130°C, some organophosphorus pesticides might be degraded, whereas extraction temperatures between 70°C and 100°C were optimal. Next, a prepared sample containing fenitrothion and permethrin was analyzed. Although the sample was not soaked in water prior to analysis, PLE provided analytical results comparable to those obtained by solvent extraction with homogenization. Therefore, PLE is considered a simple and alternative technique for the extraction of organophosphorus and pyrethroid pesticides in soybean.     

Evaluation of pressurized liquid extraction for the analysis of four pesticides in unpolished rice

The aim of to evaluate efficiency of this study was extraction pressurized liquid extraction (PLE) for the analysis of four pesticides, fthalide, etofenprox, fenitrothion, and isoprothiolane, in unpolished rice by comparing with homogenization as a reference technique. The concentrations of four selected pesticides obtained by PLE with acetonitrile at 130°C for 10 min × 2 cycles were comparable to those by homogenization with water-soaking. The repeatability of the analysis, represented as relative standard deviations (RSDs), were 1.4–3.6% (n = 3) for PLE at 130°C and 1.2–3.8% (n = 3) for homogenization with water-soaking. Recovery yields of surrogates were 75–88% and 87–109% for PLE at 130°C and homogenization with water-soaking, respectively, and these were satisfactory according to the method of positive list. This study suggested that PLE can be applied for the analysis of selected four pesticides in unpolished rice as well as homogenization with water-soaking.