The Chinese steel industry

The Chinese steel industry achieved even growth in the 1980s and China is now the world's fourth largest steel producing country. Two factors that have played important roles in this development of the Chinese steel industry are the reform of the system or the strengthening of enterprise autonomy accompanying market reform, and the introduction of advanced technology from Western countries as a continuing policy since the 1970s. The Chinese steel industry still lags far behind those of other steel producing countries in terms of equipment and production technology, however. The present situation and problems of the Chinese steel industry in the 1990s are discussed here, together with a review of its development in the 1980s.     

Effects of water depth and litter accumulation on morpho-ecological adaptations of Eleocharis sphacelata

The morpho-ecological adaptations of Eleocharis sphacelata in response to water depth and the sequential effects of resultant differences in deep water conditions on the long term population dynamics were investigated based on the observations carried out in three stable homogeneous populations in Goulburn and Ourimbah, New South Wales, Australia from August 2003 to May 2005. The deep water populations attained a higher harvestable shoot biomass and a lower rhizome biomass with increased growth in root structure thus significantly enhancing the nutrient uptake rates leading to a higher accumulation of shoot bound macronutrients. However, the accretion of excessive amounts of autogenous shoot litter coupled with slower decomposition rates under anaerobic conditions in the two deep water populations led to higher nutrient enrichment in sediments and overlying water column causing subsequent eutrophication with signs of growth inhibition including typical stress symptoms like stunted growth and chlorotic shoots. The shallow water population that intermittently experienced alternative inundation-drawdown pattern depicted an unaffected continuation of seasonal growth affirming that strict water regime management practices coupled with timely mowing or the removal of accumulating litter are necessary to ensure long-term survival of healthy E. sphacelata stands when it is used in applications where deep water conditions prevail.     

Female sex pheromone and male behavioral responses of the bombycid moth <Emphasis Type="Italic">Trilocha varians</Emphasis>: comparison with those of the domesticated silkmoth <Emphasis Type="Italic">Bombyx mori</Emphasis>

Analysis of female sex pheromone components and subsequent field trap experiments demonstrated that the bombycid moth Trilocha varians uses a mixture of (E,Z)-10,12-hexadecadienal (bombykal) and (E,Z)-10,12-hexadecadienyl acetate (bombykyl acetate) as a sex pheromone. Both of these components are derivatives of (E,Z)-10,12-hexadecadienol (bombykol), the sex pheromone of the domesticated silkmoth Bombyx mori. This finding prompted us to compare the antennal and behavioral responses of T. varians and B. mori to bombykol, bombykal, and bombykyl acetate in detail. The antennae of T. varians males responded to bombykal and bombykyl acetate but not to bombykol, and males were attracted only when lures contained both bombykal and bombykyl acetate. In contrast, the antennae of B. mori males responded to all the three components. Behavioral analysis showed that B. mori males responded to neither bombykal nor bombykyl acetate. Meanwhile, the wing fluttering response of B. mori males to bombykol was strongly inhibited by bombykal and bombykyl acetate, thereby indicating that bombykal and bombykyl acetate act as behavioral antagonists for B. mori males. T. varians would serve as a reference species for B. mori in future investigations into the molecular mechanisms underlying the evolution of sex pheromone communication systems in bombycid moths.     

Micro dimple milling on cylinder surfaces

The paper presents a micro dimple machining on a cylinder surface with a two-flutes ball end mill. When the cutter axis is inclined and the depth of cut is less than the tool radius, non-cutting time, during which neither of the two cutting edges contacts the workpiece, appears in a rotation of the cutter. The rotation of the workpiece and the feed of the tool are controlled so that the cutting areas do not overlap each other. In order to incline the tool with respect to the tangential direction on the cylinder surface, the tool is located at a position oriented at 45° from the top of the cylinder. An analytical model is presented to control the shapes of the dimples with the cutting parameters. The presented machining is verified in cutting tests with measuring the shape and the profile of the dimples. Pre-machining operations are conducted to have a high cylindricity of the workpiece in longitudinal turning and polishing. The cutter runout of the tool is also eliminated by adjusting the orientation and the position of the tool in the collet chuck with measuring the cutting force. The micro dimples are machined accurately as they are simulated.     

Simple and rapid yeast reporter bioassay for dioxin screening: evaluation of the dioxin-like compounds in industrial and municipal waste incineration plants

The CROMIS AhR kit, a simple and rapid yeast bioassay kit, was developed and used to detect dioxins and dioxin-like compounds in 20 gas and solid samples collected from refuse incineration plants in Japan. The World Health Organization toxic equivalent (WHO-TEQ) values of the samples were also calculated using high-resolution gas chromatography/high--resolution mass spectrometry. The WHO-TEQ values of the samples varied greatly, ranging from 0.0021–6.3 ng/g to 0.00013–16 ng/m³N (normal cubic meter) in the solid and gas samples, respectively. 2,3,4,7,8-Pentachlorodibenzofuran (23478-PeCDF) and 1,2,3,7,8-pentachlorodibenzo-p-dioxin (12378-PeCDD) were the major contributors to the samples’ WHO-TEQ values. The yeast in the bioassay responded to these congeners, and the EC₅₀ values of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2378-TeCDD), 12378-PeCDD, and 2,3,4,7,8-PeCDF were 490, 560, and 590 nM, respectively. The incinerator samples were subjected to the bioassay to obtain 2378-TeCDD equivalent values (CROMIS-TEQ values). The CROMIS-TEQ values of the solid and gas samples ranged from 0.0019 to 5.64 ng/g and from 0.14 to 20 ng/m³N, respectively. The CROMIS-TEQ and WHO-TEQ values displayed good correlations (r ²?=?0.94 and 0.95 in the solid and gas samples, respectively), except for those of the samples with low dioxin concentrations (below the Japanese emission standards). Therefore, the CROMIS AhR kit is a useful tool for the initial screening of samples containing dioxin-like compounds.     

Apoplastic ascorbate contributes to the differential ozone sensitivity in two varieties of winter wheat under fully open-air field conditions

We studied leaf apoplastic ascorbates in relation to ozone (O₃) sensitivity in two winter wheat (Triticum aestivum L.) varieties: Yangfumai 2 (Y2) and Yangmai 16 (Y16). The plants were exposed to elevated O₃ concentration 27% higher than the ambient O₃ concentration in a fully open-air field from tillering stage until final maturity. The less sensitive variety Y16 had higher concentration of reduced ascorbate in the apoplast and leaf tissue by 33.5% and 12.0%, respectively, than those in the more sensitive variety Y2, whereas no varietal difference was detected in the decline of reduced ascorbate concentration in response to elevated O₃. No effects of O₃ or variety were detected in either oxidized ascorbate or the redox state of ascorbate in the apoplast and leaf tissue. The lower ascorbate concentrations in both apoplast and leaf tissue should have contributed to the higher O₃ sensitivity in variety Y2.     

Annual production and molecular weight as an influential factor for environmental distribution of chemicals — a case study in Japan

The changes promoted by treatment of a highly polluted soil with sulphuric acid or calcium hydroxide for changing its pH value are studied by controlling physical properties (particle size, TGA and DTA curves), evolution of metal species (exchangeable, as carbonates, related to Fe‐Mn oxides, linked to organic matter and residual) and metal uptake by plant cultures. Metal contents were determined, after wet digestion with HF—HNO₃—HC1O₄ when necessary, by AAS (Ca, Mg, Cu, Pb, Mn, Fe, Zn) or emission (Na, K). The treatment of soil with successive amounts of sulphuric leads to changes in particle size, hydration properties and exothermic peak for organic matter combustion. Very small changes were, however, detected in the alkaline treatment of soil. Soil treatments do not have practical influence on speciation of some metals (Na, K, Mg, Pb, Mn, Fe), but the intensity of the acid treatment leads to both an increase in the Cu extraction and a decrease in the Ca solubilization, probably through gypsum formation. In the case of zinc a maximum solubility in the middle of the range of acid treatment was observed. The comparison among extractants shows solubilities high for two pollutants (Pb, Cu), associated mainly to Fe—Mn oxides and organic matter, and low for two macrocomponents (Fe, K). The rest of metals, basically present in soil as carbonates or oxides, have intermediate extractions. Pot cultures weights depended mainly on both the treatment of soil (poor development in the more acid sample and drainage difficulties in the rest of acid treatments) and the situation (very low weights in laboratory runs as compared with outside), but the irrigation with water or a diluted sulphuric acid solution (at pH = 4.0) did not produce significant weight changes. Tendencies to increase plant pollution were observed for smaller soil pH, acid irrigation and probably for outside cultures, due to uptake by leaves.     

Elucidation of ecosystem attributes of an oligotrophic lake in Hokkaido,Japan, using Ecopath with Ecosim (EwE)

The fishing practices in the oligotrophic Lake Toya, Hokkaido, Japan, have profound implications in the ecosystem sustainability. The status of the sockeye salmon (Oncorhynchus nerka) population has become a serious concern among the lake managers and policy makers during the last decades. While the decline of the sockeye salmon population has been well documented in Lake Toya, there is considerable uncertainty with regards to the impact on the broader system dynamics. In this study, our objective is to address this knowledge gap by undertaking a synthesis of the Lake Toya food web using the mass-balance modeling software Ecopath with Ecosim (EwE). Our primary research question is to examine the repercussions of the declining sockeye salmon population on the trophic dynamics of the lake. Namely, we assess if there are any competing species that might have benefited from the decrease of sockeye salmon standing biomass and to what extent do these changes propagate through the Lake Toya food web? Our analysis pinpoints the critical role of the Japanese smelt (Hypomesus transpacificus nipponensis) in the system, which demonstrates a wide range of effects on several functional groups at both higher and lower trophic levels in Lake Toya. In particular, being a substantial portion of the masu salmon (Oncorhynchus masou) and adult sockeye salmon diets, the Japanese smelt has a positive impact on the top predators of the system. Amphipods, insects, and shrimp strongly benefit from the autochthonous and allochthonous organic matter in the system, while the tight coupling between phytoplankton and zooplankton seems to be particularly critical for the integrity of the Lake Toya food web. Whereas the values of the different ecosystem attributes (e.g., primary production/biomass, biomass/total throughput, system omnivory index, amount of recycled throughput, Finn's cycling index) provide evidence that Lake Toya is an immature system, we note that the internal redundancy and the system overhead estimates suggest that the lake possesses substantial reserves to overcome external perturbations. We also examined the effects of a variety of fishing policies on the biomass of masu salmon and adult sockeye salmon, which verify the belief that the adult sockeye population is quite fragile with high likelihood to collapse. Our analysis also predicts that sockeye will not rebound unless the fishing pressure exerted is substantially reduced (>50% of the reference levels used). Masu salmon seems to benefit under all the scenarios examined indicating that the intensity of the current fishing activities is significantly lower than its biomass accumulation rate in the system.