Compound-specific isotopic and congener-specific analyses of polychlorinated biphenyl in the heat medium and rice oil of the Yusho incident

Compound-specific isotope analysis (CSIA) can be used to examine the source and transformation processes of organic pollutants in the environment. We performed a carbon stable isotope analysis of polychlorinated biphenyl (PCB) congeners in the PCB heat-transfer medium (heat medium) and the original Kanechlor-400 (KC-400, a commercial brand of PCBs) involved in the Yusho incident. The main purpose is to investigate whether isotope fractionation occurred in the rice oil deodorization process that caused the incident. The carbon isotope ratios (δ¹³C values) of the targeted PCB congeners ranged from ? 29.39 to ? 27.00‰ in the heat medium and from ? 28.77 to ? 27.05‰ in the original KC-400. No significant differences were found in the δ¹³C values, suggesting carbon isotope fractionation did not occur for the targeted PCB congeners in the heat medium when deodorization of rice oil occurred at temperatures above 200 °C. Furthermore, we also conducted a congener-specific analysis of 64 PCB congeners found in the heat medium and rice oil contaminated by it. The total PCB congener concentrations were 503 mg/g in the heat medium and 81 μg/g in the rice oil. The concentrations of the highly chlorinated congeners were significantly lower in the heat medium than in the original KC-400, and the compositional ratios of the lowly chlorinated congeners were relatively lower in the rice oil than in the heat medium. These results suggest that the PCB congener patterns gradually changed from that of the original KC-400 in the deodorization process and subsequent contamination into the rice oil. Thus, a combination of CSIA and congener-specific analysis is a new approach for investigating the changing PCB congener profiles in samples from the Yusho incident.     

Thermal destruction of wastes containing polychlorinated naphthalenes in an industrial waste incinerator

A series of verification tests were carried out in order to confirm that polychlorinated naphthalenes (PCNs) contained in synthetic rubber products (Neoprene FB products) and aerosol adhesives, which were accidentally imported into Japan, could be thermally destroyed using an industrial waste incinerator. In the verification tests, Neoprene FB products containing PCNs at a concentration of 2800 mg/kg were added to industrial wastes at a ratio of 600 mg Neoprene FB product/kg-waste, and then incinerated at an average temperature of 985 °C. Total PCN concentrations were 14 ng/m³N in stack gas, 5.7 ng/g in bottom ash, 0.98 ng/g in boiler dust, and 1.2 ng/g in fly ash. Destruction efficiency (DE) and destruction removal efficiency (DRE) of congener No. 38/40, which is considered an input marker congener, were 99.9974 and 99.9995 %, respectively. The following dioxin concentrations were found: 0.11 ng-TEQ/m³N for the stack gas, 0.096 ng-TEQ/g for the bottom ash, 0.010 ng-TEQ/g for the boiler dust, and 0.072 ng-TEQ/g for the fly ash. Since the PCN levels in the PCN destruction test were even at slightly lower concentrations than in the baseline test without PCN addition, the detected PCNs are to a large degree unintentionally produced PCNs and does not mainly stem from input material. Also, the dioxin levels did not change. From these results, we confirmed that PCNs contained in Neoprene FB products and aerosol adhesives could be destroyed to a high degree by high-temperature incineration. Therefore, all recalled Neoprene FB products and aerosol adhesives containing PCNs were successfully treated under the same conditions as the verification tests.     

Performance and efficiency of removal of pharmaceutical compounds from hospital wastewater by lab-scale biological treatment system

The fate of pharmaceuticals after discharged from hospital into wastewater was clarified experimentally by using a new lab-scale conventional activated sludge (CAS) treatment reactor. The 43 target compounds belong to nine therapeutic classes (antivirals, antibacterials, anticancer drugs, psychotropics, antihypertensives, analgesic–antipyretics, contrast media, herbal medicines, and phytoestrogens) were selected with inclusion of 16 newly estimated compounds. The efficiency of the present reactor was estimated by comparing the reaction rate constant of the solid-water partition coefficients (log K_d) between liquid and solid samples and half-life during 48-h experiment obtained by using hospital effluents with those obtained by using STP wastewater. The results that no significant difference in removal efficiency was observed between both water samples (P?>?0.05) indicate high reliability of the present lab-scale reactor. The actual rates of removal when hospital effluent was applied varied widely (mean, 59?±?40%) independent of type of the pharmaceuticals. More than 90% of 17 compounds were removed after 8 h of treatment. However, the values for psychotropics (mean, 19?±?26%) and contrast media (mean, 24?±?17%) were generally low, indicating high stability. The log K_d values ranged from 1.3 to 4.8. Notably, clarithromycin, acridine, and glycitein could be removed in both liquid and solid phases. The dominant removal mechanisms were found to be different for individual pharmaceutical. These results suggest the effectiveness of introduction of the lab-scale biological treatment system for development of a new solution for discharge of pharmaceuticals from hospital.

     

Developing joint educational programs in sustainability science across different universities: a case study from Japan

The challenge for sustainability educational programs lies in how to imbue students with the strong motivation necessary to move the world in a more sustainable direction. Five universities in Japan have mutually collaborated in the design and development of a unique curriculum and education system for sustainability science since 2008. Specifically, they have developed a common and remote lecture system called the “Frontier of sustainability science” (FSS). This paper discusses the concepts and challenges of FSS and how it was organized to teach students to actively learn how to work with people of various disciplines to realize interdisciplinarity.     

Laboratory studies of the diffusive transport of Cs and Co through potential waste repository soils

Tests using reconstituted samples have been performed to assess the diffusive transport of ¹³⁷Cs and ⁶⁰Co through natural regolith materials from a region in South Australia being considered for a radioactive waste repository. A double diffusion cell apparatus made of polycarbonate resin was developed to estimate the effective diffusion (D_e) and sorption coefficients (K_d) that allowed large withdrawals from the source and collector cells and has enabled tests with low concentrations of radioactivity. An alternative to porous stainless steel filter plates has also been used to reduce uncertainty in test interpretation. Analysis of the transient data used a staged method of the Laplace transform to take into consideration the volume of the samples withdrawn from the apparatus during testing. At test completion samples were cut into slices and analysed for radionuclide concentration. Data obtained from the sliced samples confirmed that both numerical and experimental data produced acceptable mass balance. The D_e values obtained in this study were of the order of 10⁻⁶ cm² s⁻¹ for both species, higher than previously published data. The K_d values from the diffusion and batch sorption tests were in reasonable agreement for ¹³⁷Cs, but an order of magnitude different for ⁶⁰Co. The sorption of the latter radionuclide was strongly pH dependent, and this dependency during diffusion tests would benefit from further investigation.     

Impact of the December 2004 tsunami on soil, groundwater and vegetation in the Nagapattinam district, India

The tsunami of 26 December 2004 struck the Nagapattinam District, Tamil Nadu, India. Sea water inundation from the tsunami caused salinization problems for soil and groundwater in coastal areas of the district, and also induced salt injuries in crops. To document the recovery of the agricultural environment from the tsunami, we conducted observations of the soil, groundwater, and vegetation. Soil electrical conductivity increased sharply after the tsunami, but returned to pre-tsunami levels the following year. Groundwater salinity returned to pre-tsunami levels by 2006. These rapid rates of recovery were due to the monsoon rainfall leaching salt from the highly permeable soils in the area. MODIS NDVI values measured before and after the tsunami showed that vegetation damaged by the tsunami recovered to its pre-tsunami state by the next rice cropping season, called samba, which starts from August to February. From these results, we conclude that the agricultural environment of the district has now fully recovered from the tsunami. Based on the results, we have also identified important management implications for soil, groundwater, and vegetation as follows: 1) due to the heavy monsoon rainfall and the high permeability of soils in this region, anthropogenic inputs like fertilizers should be applied carefully to minimize pollution, and the use of green manure is recommended; 2) areas that were contaminated by sea water extended up to 1000 m from the sea shore and over pumping of groundwater should be carefully avoided to prevent inducing sea water intrusion; and 3) data from a moderate resolution sensor of 250 m, such as MODIS, can be applied to impact assessment in widespread paddy field areas like the Nagapattinam District.     

Sustainability education and a new master’s degree, the master of sustainability science: the Graduate Program in Sustainability Science (GPSS) at the University of Tokyo

The University of Tokyo started its Graduate Program in Sustainability Science (GPSS), offering a master of sustainability science degree, in 2007. The GPSS curriculum consists of: (1) knowledge and concept oriented courses, which cover sustainability-related subjects from a holistic viewpoint; (2) experiential learning and skills oriented practical courses, which offer practical exercises to acquire the skills and sensibility required of future leaders; and (3) the Master’s thesis, for which students are encouraged to address complex sustainability problems through a transdisciplinary approach. Sustainability science is not a discipline that can be defined simply by the subjects it deals with, but is an academic field characterized by core principles that include holistic thinking, transdisciplinarity, and respect for diversity. The GPSS has been designed so that students may gain the capacity to understand and practice these principles. The present paper describes how the GPSS has defined sustainability education and designed its curriculum accordingly.     

Viable chemical recycling of poly(carbonate) as a phosgene equivalent illustrated by the coproduction of bisphenol A and carbohydrate carbonates

Chemical recycling of waste poly(carbonate) (PC) to coproduce bisphenol A (BPA) and carbohydrate carbonates was studied by selecting glycerol (Gly) and glucose (Glu) as model carbohydrates (CHs). In advance of the reaction of PC with CHs, reactions with diphenyl carbonate were examined as a model PC. In dioxane at 100°C using NaOH as catalyst, Gly was converted to cyclic carbonate hydroxymethyldioxolane (HMDO) at 98% and Glu was converted to the dicarbonate (Glu-DC) at 46%, in pyridine, in addition to the production of phenol. Similar treatment of PC with Gly using KOH as a catalyst produced HMDO and BPA at very high yields and treatment with Glu produced Glu-DC and BPA in 38%–42% yields. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Subcellular distribution of trace elements in kidney of a mother-fetus pair of Dall's porpoises (Phocoenoides dalli)

Total and subcellular renal Zn, Cu, Se, Mn, V, Hg, Cd and Ag were determined by a mother-fetus pair of Dall's porpoises (Phocoenoides dalli). All element concentrations in the maternal individual were higher than those in the fetal individual. Most of total renal elements studied were present in the cytosol of both animals. In maternal cytosol, Mn, Hg and Ag were present in high molecular weight substances (HMW); Se was in low molecular weight substances (LMW); Zn, Cu, and Cd were in metallothionein (MT), mostly; and the distribution of V in percentage among the three renal cytosolic fractions was similar. In fetal cytosol, Zn, Mn, Hg, V, Cd, and Ag were present in HMW, Cu was present in MT, mostly. In contrast, Se was observed mostly in both LMW and HMW. MT isoforms were characterized. Three obvious peaks in retention time were found in either the maternal or fetal MT. The highest elemental ion intensities were in the 7.8min peak for the mother, and in the 4.3min peak for the fetus, respectively, implying that different MT isoforms may be closely associated with elemental accumulation between maternal and fetal renal cytosols.