Investigation of saponification for determination of polychlorinated biphenyls in marine sediments

The effects of saponification conditions (temperature and water content of saponifying solution) on the determination of chlorinated biphenyls (CBs) in marine sediments were investigated. Although highly chlorinated biphenyls (nona- to deca-CBs) decomposed during high-temperature saponification, the degree of degradation was reduced by adding water to the ethanolic potassium hydroxide saponifying solution. Room-temperature saponification yielded quantitative recovery of highly chlorinated biphenyl surrogates but low extraction efficiencies of lightly chlorinated biphenyls (mono- to di-CBs). The same samples were analyzed by other extraction techniques, for example, pressurized liquid extraction, and analytical results were compared. The mono- and di-CB concentrations were correlated with the extraction temperatures of various extraction techniques. In particular, the concentrations of some CB congeners (CB11, CB14) were higher with saponification. The low degree of degradation of highly chlorinated biphenyls and the high recovery of lightly chlorinated biphenyls were compatible when room-temperature and high-temperature saponification were combined. Except for the anomalies of CB11 and CB14, the combined method gave satisfactory results for analysis of PCBs.     

Effects of copper chloride on formation of polychlorinated dibenzofurans in model waste incineration in a laboratory-scale fluidized-bed reactor

Combustion experiments in a laboratory-scale fluidized-bed reactor have been performed to clarify the effects of copper chloride as a catalyst on polychlorinated dibenzofurans (PCDFs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl2 x 2H2O) as a catalyst, both of which contained polyvinyl chloride (PVC) as a chlorine source. Combustion temperature was set to 900 degrees C, and the amount of air supplied was twice as much as the theoretical amount. The experimental setup had been carefully planned to ensure avoidance of the influences of previous experiments. Results of these present experiments revealed that copper chloride in the waste increased the amount of PCDFs formed and made the homologue profile shifted towards the highly chlorinated species. Copper chloride contributes to PCDFs formation by promoting chlorination via catalytic reactions, whereby the reaction could be important in that organic matters are chlorinated directly by chlorinated compounds related to Deacon reaction such as copper chloride. It was elucidated that characteristic isomer distribution patterns appeared in case the waste contained copper chloride. It is probable in our experiment with copper chloride that PCDFs are mainly formed via catalytic reactions of copper compounds and carbon.     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Factors affecting the interval between clutches in the hermit crab <Emphasis Type="Italic">Pagurus nigrivittatus</Emphasis>

Interval between reproductive events is an important factor for iteroparous animals because it determines the number of clutches throughout life. This study examined whether female size, clutch size, shell size and prenuptial molting affected the clutch interval in the hermit crab Pagurus nigrivittatus. Precopulatory guarding pairs of P. nigrivittatus were sampled in the field and kept in the laboratory until the female extruded eggs. The clutch interval of each female was assessed as one of two types of relatively “short” and “long” intervals by checking whether the guarded female had eggs and/or egg cases from the preceding brood or not when the guarding pair was collected. The clutch interval was longer in females with prenuptial molting than those without molting and these females usually grew larger at the prenuptial molt. This suggests that female P. nigrivittatus with a long interval might allocate energy into growth at the expense of the number of clutches during the current reproductive season. The allocation to growth is theoretically predicted to decrease with female size. Gastropod shell size is also known to affect the reproductive activity in hermit crabs. However, female size did not significantly affect the clutch interval in P. nigrivittatus, and the effect of gastropod shell size on clutch interval was not consistent with previous empirical studies. These results may be caused by differences in the gastropod species of shell occupied by the females of P. nigrivittatus.     

Reduction of CO2 emission by optimally tracking a pre-defined target

The recent global financial crisis has highlighted the need for balanced and efficient investments in the reduction of the greenhouse effect caused by emissions of CO₂ on a global scale. In a previous paper, the authors proposed a mathematical model describing the dynamic relation of CO₂ emission with investment in reforestation and clean technology. An efficient allocation of resources to reduce the greenhouse effect has also been proposed. Here, this model is used to provide estimates of the investments needed in land reforestation and in the adoption of clean technologies for an optimum emission and abatement of CO₂, for the period of 1996–2014. The required investments are computed to minimize deviations with respect to the emission targets proposed in the Kyoto Protocol for European Countries. The emission target can be achieved by 2014 with investments in reforestation peaking in 2004, and a reduction of the expected GDP of 42%, relative to 2006. Investments in clean technology should increase between 2008 and 2010 with maximum transfer figures around 70 million American dollars. Total (cumulative) costs are, however, relatively high depending on the price of carbon abatement and the rate at which the expected CO₂ concentration in the atmosphere should be reduced. Results highlight the advantages for policy makers to be able to manage investments in climate policy more efficiently, controlling optimum transfers based on a portfolio of actions that tracks a pre-defined CO₂ concentration target.     

Recovery efficiency of the hydrofluorocarbon (HFC‐134a) by activated carbons of different physicochemical properties

The adsorption characteristics of 1,1,1,2‐tetrafluoroethane (HFC‐134a) on activated carbon were investigated to evaluate the recovery efficiency of HFC‐134a by six activated carbons (two granular activated carbons (GAC1 and GAC2), one high‐surface area activated carbon (HAC), and three activated carbon fibers (ACF10, ACF15, and ACF20)). HFC‐134a adsorption on the activated carbons increased with increase in the specific surface area and pore volume of the activated carbon. The differential heat of the HFC‐134a adsorption decreased with increase in the percentage of the micropore volume to the total pore volume. The adsorption model of HFC‐134a on the activated carbon could be based on the Langmuir model. The constant a of the Langmuir plot of HAC and ACF20 is smaller than GAC1 or GAC2 and ACF10 or ACF15, respectively. The constant W_s of HAC has the largest value. The constant a was correlated to the heat of adsorption. It is concluded that the largest amount of HFC‐134a was adsorbed on HAC, and the least amount of interaction occurred between HFC‐134a and the HAC. The amount of HFC‐134a adsorbed on the activated carbons over time was applied to the Sameshima equation. The adsorption rate constant of HFC‐134a on HAC was the largest. The HAC could be suitable for the recovery of HFC‐134a.     

Honeybee foragers adjust crop contents before leaving the hive

Upon leaving the hive, foragers carry a small amount of honey, which they subsequently consume to generate energy for flight. We investigated the relationship between waggle-phase duration and crop volume in foragers (both dancers and dance followers) leaving the hive. Our findings indicate that these variables were positively correlated in the two types of bee, suggesting that they were able to adjust the amount of food that they carry depending on the distance to a food source. We also found that dance followers left the hive with a larger amount of honey than dancers. We suggest two possible explanations: (1) dance followers have less information about the location of the food source than dancers, who have a better knowledge of the surrounding area; or (2) honeybees lack a precise calibration method for estimating energy needs from waggle-run duration. The effect of foraging experience was confirmed: bees decreased their honey load at departure with repeated trips to a sugar-syrup feeder. Honeybees showed a different pattern of change when the feeder provided soybean flour as a pollen substitute, possibly because honeybees use honey not only as an energy source but also as “glue” to form “balls” of pollen on their hind legs. Based on our observations that followers of sugar-syrup foragers carry a different amount of honey in their crop than followers of soybean-followers, we suggest that waggle dancers also convey information concerning food type.     

A method for diagnosis of plant environmental stresses by gene expression profiling using a cDNA macroarray

Plants in the field are subjected to numerous environmental stresses. Lengthy continuation of such environmental stresses or a rapid increase in their intensity is harmful to vegetation. Assessments of the phytotoxicity of various stresses have been performed in many countries, although they have largely been based on estimates of leaf injury. We developed a novel method of detecting plant stresses that is more sensitive and specific than those previously available. This method is based on the detection of mRNA expression changes in 205 ozone-responsive Arabidopsis expressed sequence tags (ESTs) by cDNA macroarray analysis. By using this method, we illustrated shifts in gene expression in response to stressors such as drought, salinity, UV-B, low temperature, high temperature, and acid rain, as distinct from those in response to ozone. We also made a mini-scale macroarray with 12 ESTs for diagnosis of the above environmental stresses in plants. These results illustrate the potential of our cDNA macroarray for diagnosis of various stresses in plants.     

Detection and average content levels of carcinogenic and mutagenic compounds from the particulates on diesel and gasoline engine mufflers

Carcinogenic and mutagenic compounds, which were extracted from the particulates that adhered to inner surfaces of diesel and gasoline engine mufflers, were quantified by the series method of Soxhlet extraction, liquid-liquid partition, thin-layer chromatography, and spectrofluorometry. Mutagenic activity of their neutral and acidic fractions was tested in the improved Ames assay by the preincubation method with Salmonella typhimurium TA98 in the presence and absence of metabolic activation system (S-9 mix). The average content levels (μg/g tar) of polycyclic aromatic hydrocarbons from gasoline engine cars were greater than those from diesel engine vehicles. However, the levels of nitro derivatives of PAHs and polycyclic quinones from the diesel engines were greater than from the gasoline engines. Mutagenic activity of the diesel acidic fraction was the highest among the diesel and gasoline fractions, and was significantly higher in the absence of the S-9 mix. Furthermore, the relative value (R_{c = 0}) of infrared absorption of carbonyl stretching vibration to that of methylene asymmetric stretching vibration of the diesel acidic fraction was the highest among the diesel and gasoline fractions. These results strongly suggest that highly direct-acting mutagens in the acidic fraction are at higher levels in diesel emission particulates than those from gasoline, and that these mutagens are carboxylic acid, aldehyde, and alcohol derivatives of PAHs and NPAHs.